Test Report

FCC ID: U6Y-M12011

Test Report

Download: PDF
FCCID_4434415

Panasonic Avionics Corp. TEST REPORT FOR W-LAN Module Model: J3FYY0000061 Tested to The Following Standards: FCC Part 15 Subpart E Section 15.407 (UNII 5.15 – 5.25GHz) Report No.: 101836-3 Date of issue: April 9, 2019 This test report bears the accreditation symbol indicating that the testing performed herein meets the test and reporting requirements of ISO/IEC 17025 under the applicable scope of testing for CKC Laboratories, Inc. We strive to create long-term, trust based relationships by providing sound, adaptive, customer first testing services. We embrace each of our customers’ unique EMC challenges, not as an interruption to set processes, but rather as the reason we are in business. Test Certificate # 803.02 This report contains a total of 21 pages and may be reproduced in full only. Partial reproduction may only be done with the written consent of CKC Laboratories, Inc.

TABLE OF CONTENTS Administrative Information .......................................................................................................................... 3 Test Report Information ............................................................................................................................................3 Report Authorization .................................................................................................................................................3 Test Facility Information ............................................................................................................................................4 Software Versions ......................................................................................................................................................4 Site Registration & Accreditation Information ..........................................................................................................4 Summary of Results ...................................................................................................................................................5 Modifications During Testing .....................................................................................................................................5 Conditions During Testing..........................................................................................................................................5 Equipment Under Test ...............................................................................................................................................6 General Product Information.....................................................................................................................................6 FCC Part 15 Subpart E ................................................................................................................................... 7 15.407(b) / (b)(1) Radiated Emissions & Band Edge ..................................................................................................7 Supplemental Information .......................................................................................................................... 20 Measurement Uncertainty ......................................................................................................................................20 Emissions Test Details ..............................................................................................................................................20 Page 2 of 21 Report No.: 101836-3

EKE ADMINISTRATIVE INFORMATION Test Report Information rerort rreparep ror: Reeort rremaneo av. Panasonic Avionics Corp. Darey Thompson 26200 Enterprise Way CKCLaboratories,Inc. Lake Forest CA92630 5046 Sterra Plnes Drive Mariposa, CA 95338 Representative: David OReilly Project Number: 101836 Customer Reference Number: 1626754 pare of EquipmEnt RectiPr: March 21, 2019 pare(s) of Tesmi: March 21, 22 and 2, 2019 Report Authorization The test data contained this report documents the observed testing parameters pertaining to and are relevant for only the equinment provided by the client, tested in the agreed upon operational mode(s) and configuration(s) as iden ied herein. Compliance assessment remains the dient‘s responsibilty. This report may not be used to claim product endorsement by AZLA or any government agencies. This test report has heen authorized for release under qualty control from CCC Laboratories,Inc. Steve Bchm Director of Quality Assurance & Engineering Services CKCtaboratories,Inc. Page 3 of 21 Report No: 101836—3

Test Facility Information Our laboratories are configured to effectively test a wide variety of product types. CKC utilizes first class test equipment, anechoic chambers, data acquisition and information services to create accurate, repeatable and affordable test results. TEST LOCATION(S): CKC Laboratories, Inc. 110 Olinda Place Brea, CA 92823 Software Versions CKC Laboratories Proprietary Software Version EMITest Emissions 5.03.12 Site Registration & Accreditation Information Location *NIST CB # FCC JAPAN Brea A, CA US0060 US1025 A-0147 *CKC’s list of NIST designated countries can be found at: https://standards.gov/cabs/designations.html Page 4 of 21 Report No.: 101836-3

SUMMARY OF RESULTS Standard / Specification: FCC Part 15 Subpart E - 15.407 (NII) Test Procedure Description Modifications Results 15.215 Occupied Bandwidth NA NP 15.407(a)(1) Output Power NA NP 15.407(a)(1) Power Spectral Density NA NP 15.407(a)(1)(iii) EIRP at >30º Elevation NA NP 15.407(g) Frequency Stability NA NP 15.407(b) / (b)(1) Radiated Emissions & Band Edge NA Pass 15.207 AC Conducted Emissions NA NP NA = Not Applicable NP = CKC Laboratories was not contracted to perform tests. ISO/IEC 17025 Decision Rule The declaration of pass or fail herein is based upon assessment to the specification(s) listed above, including where applicable, assessment of measurement uncertainties. For performance related tests, equipment was monitored for specified criteria identified in that section of testing. Modifications During Testing This list is a summary of the modifications made to the equipment during testing. Summary of Conditions No modifications were made during testing. Modifications listed above must be incorporated into all production units. Conditions During Testing This list is a summary of the conditions noted to the equipment during testing. Summary of Conditions None Page 5 of 21 Report No.: 101836-3

EQUIPMENT UNDER TEST (EUT) During testing, numerous configurations may have been utilized. The configurations listed below support compliance to the standard(s) listed in the Summary of Results section. Configuration 1 Equipment Tested: Device Manufacturer Model # S/N W-LAN Module Panasonic Avionics Corp. J3FYY0000061 NA Support Equipment: Device Manufacturer Model # S/N Tablet Panasonic Avionics Corp. RD-NA1108-02U1.2 RD11781 Cradle Int. Passenger Control Unit Panasonic Avionics Corp. RD-NA1103-01 U026022 Premium Seat Electronics Box Panasonic Avionics Corp. RD-FA3221-01 E646066 Laptop Dell Precision M2400 9303528493 Power Supply GW Instek PSP-405 EF171595 Power Supply Dell DA65NM130 NA General Product Information: Product Information Manufacturer-Provided Details Equipment Type: Radio Module Type of Wideband System: 802.11a Operating Frequency Range: 5180, 5200, 5220, 5240MHz Modulation Type(s): OFDM Maximum Duty Cycle: 99% Number of TX Chains: 2 Antenna Type(s) and Gain: 2x2 MIMO, 2.21dBi Beamforming Type: N/A Antenna Connection Type: External Connector Nominal Input Voltage: 3.3Vdc Firmware / Software used for Test: DutApiClass, ver.1.0.9.05 Page 6 of 21 Report No.: 101836-3

FCC Part 15 Subpart E 15.407(b) / (b)(1) Radiated Emissions & Band Edge Test Setup / Conditions / Data Test Location: CKC Laboratories, Inc. • 110 N. Olinda Place • Brea, CA 92821 • 714 993 6112 Customer: Panasonic Avionics Corp. Specification: 15.407(b) / 15.209 Radiated Spurious Emissions Work Order #: 101836 Date: 3/22/2019 Test Type: Maximized Emissions Time: 08:36:48 Tested By: Don Nguyen Sequence#: 3 Software: EMITest 5.03.12 Equipment Tested: Device Manufacturer Model # S/N Configuration 1 Support Equipment: Device Manufacturer Model # S/N Configuration 1 Test Conditions / Notes: The EUT is a radio module installed inside a host (tablet) which is placed on a Styrofoam platform. The EUT is programmed to transmit continuously at 99% duty cycle at 5180, 5200, and 5240MHz. Radio module has two antennas active at the same time. The tablet is running on fully charged battery. The EUT is rotated in three orthogonal axes. Data represent the worst-case orientation. Modulation: OFDM Data Rate: 6Mbps Mode: 802.11a Operating frequency: 5180, 5200, 5220, 5240MHz Firmware power setting: 8dBm Radio Module: Limited modular approved module PCII to add new antenna 2x2 MIMO, 2.21dBi gain. Scanned frequency: 9kHz-1000MHz 9 kH -150 kHz;RBW=200 Hz,VBW=600 Hz; 150 kHz-30 MHz;RBW=9 kHz,VBW=27 kHz; 30 MHz-1000 MHz;RBW=120 kHz,VBW=360 kHz, Temperature: 24.2°C Relative Humidity: 36% Site A Test Method: ANSI C63.10 (2013) KDB 789033 D02, December 14, 2017 Page 7 of 21 Report No.: 101836-3

Test Equipment: ID Asset # Description Model Calibration Date Cal Due Date AN00314 Loop Antenna 6502 5/13/2018 5/13/2020 T1 AN00309 Preamp 8447D 2/19/2018 2/19/2020 T2 AN01995 Biconilog Antenna CBL6111C 4/23/2018 4/23/2020 T3 ANP05275 Attenuator 1W 4/5/2018 4/5/2020 T4 ANP05050 Cable RG223/U 12/24/2018 12/24/2020 T5 ANP05198 Cable-Amplitude 8268 12/4/2018 12/4/2020 +15C to +45C (dB) AN02869 Spectrum Analyzer E4440A 8/10/2018 8/10/2019 Measurement Data: Reading listed by margin. Test Distance: 3 Meters # Freq Rdng T1 T2 T3 T4 Dist Corr Spec Margin Polar T5 MHz dBµV dB dB dB dB Table dBµV/m dBµV/m dB Ant 1 84.226M 42.0 -28.1 +8.2 +6.0 +0.1 +0.0 29.8 40.0 -10.2 Horiz +1.6 2 85.332M 41.3 -28.1 +8.3 +6.0 +0.1 +0.0 29.3 40.0 -10.7 Horiz +1.7 Page 8 of 21 Report No.: 101836-3

Test Location: CKC Laboratories, Inc. • 110 N. Olinda Place • Brea, CA 92821 • 714 993 6112 Customer: Panasonic Avionics Corp. Specification: 15.407(b)(1) / 15.209 Radiated Spurious Emissions - Client Devices Work Order #: 101836 Date: 3/29/2019 Test Type: Maximized Emissions Time: 16:31:12 Tested By: Don Nguyen Sequence#: 2 Software: EMITest 5.03.12 Equipment Tested: Device Manufacturer Model # S/N Configuration 1 Support Equipment: Device Manufacturer Model # S/N Configuration 1 Test Conditions / Notes: The EUT is a radio module installed inside a host (tablet) which is placed on a Styrofoam platform. The EUT is programmed to transmit continuously at 99% duty cycle at 5180, 5200, and 5240MHz. Radio module has two antennas active at the same time. The tablet is running on fully charged battery. The EUT is rotated in three orthogonal axes. Data represent the worst-case orientation. Modulation: OFDM Data Rate: 6Mbps Mode: 802.11a Operating frequency: 5180, 5200, 5220, 5240MHz Firmware power setting: 8dBm Radio Module: Limited modular approved module PCII to add new antenna 2x2 MIMO, 2.21dBi gain. Scanned frequency: 1-40GHz 1-40GHz, RBW=1MHz, VBW=3MHz Temperature: 22.3°C Relative Humidity: 52.3% Site A Test Method: ANSI C63.10 (2013) KDB 789033 D02, December 14, 2017 Page 9 of 21 Report No.: 101836-3

Page 10 of 21 Report No.: 101836-3

Test Equipment: ID Asset # Description Model Calibration Date Cal Due Date T1 AN00786 Preamp 83017A 5/12/2018 5/12/2020 T2 AN00849 Horn Antenna 3115 3/14/2018 3/14/2020 T3 ANP07139 Cable ANDL1- 3/4/2019 3/4/2021 PNMNM-48 T4 ANP07247 Cable 32022-29094K- 7/5/2018 7/5/2020 29094K-24TC T5 AN02869 Spectrum Analyzer E4440A 8/10/2018 8/10/2019 AN03367 Horn Antenna- 62-GH-62-25. 8/24/2017 8/24/2019 ANSI C63.5 Calibration AN01413 Horn Antenna- 84125-80008 10/17/2018 10/17/2020 ANSI C63.5 (dB/m) ANP07246 Cable 32022-29094K- 7/5/2018 7/5/2020 29094K-24TC AN03158A Horn Antenna GH-28-25 3/30/2017 3/30/2019 AN02672 Spectrum Analyzer E4446A 3/13/2019 3/13/2021 Measurement Data: Reading listed by margin. Test Distance: 3 Meters # Freq Rdng T1 T2 T3 T4 Dist Corr Spec Margin Polar T5 MHz dBµV dB dB dB dB Table dBµV/m dBµV/m dB Ant 1 10473.500M 45.3 -36.0 +38.6 +7.5 +0.6 +0.0 56.0 68.2 -12.2 Horiz +0.0 2 6933.250M 51.1 -37.4 +34.7 +5.8 +0.2 +0.0 54.4 68.2 -13.8 Horiz +0.0 3 10359.580M 42.9 -35.8 +38.5 +7.5 +0.7 +0.0 53.8 68.2 -14.4 Horiz +0.0 4 6906.580M 50.1 -37.4 +34.6 +5.8 +0.2 +0.0 53.3 68.2 -14.9 Horiz +0.0 5 10478.700M 41.7 -36.0 +38.6 +7.5 +0.6 +0.0 52.4 68.2 -15.8 Vert +0.0 6 10358.920M 41.3 -35.8 +38.5 +7.5 +0.7 +0.0 52.2 68.2 -16.0 Vert +0.0 7 10400.420M 40.9 -35.9 +38.7 +7.5 +0.6 +0.0 51.8 68.2 -16.4 Horiz +0.0 8 6986.750M 48.0 -37.4 +34.7 +5.8 +0.2 +0.0 51.3 68.2 -16.9 Horiz +0.0 9 10400.250M 40.1 -35.9 +38.7 +7.5 +0.6 +0.0 51.0 68.2 -17.2 Vert +0.0 10 6933.250M 47.5 -37.4 +34.7 +5.8 +0.2 +0.0 50.8 68.2 -17.4 Vert +0.0 11 6906.580M 47.0 -37.4 +34.6 +5.8 +0.2 +0.0 50.2 68.2 -18.0 Vert +0.0 12 6986.670M 45.4 -37.4 +34.7 +5.8 +0.2 +0.0 48.7 68.2 -19.5 Vert +0.0 Page 11 of 21 Report No.: 101836-3

Band Edge Band Edge Summary Frequency Field Strength Limit Modulation Ant. Type Results (MHz) (dBuV/m @3m) (dBuV/m @3m) 5150 OFDM External 45.9 < 54.0 Pass 5250 OFDM External 62.0* < 68.2 Pass *Integration method Band Edge Plots High Channel Integration Page 12 of 21 Report No.: 101836-3

Page 13 of 21 Report No.: 101836-3

Test Setup / Conditions / Data Test Location: CKC Laboratories, Inc. • 110 N. Olinda Place • Brea, CA 92821 • 714 993 6112 Customer: Panasonic Avionics Corp. Specification: 15.407(b)(1) / 15.209 Radiated Spurious Emissions - Client Devices Work Order #: 101836 Date: 3/21/2019 Test Type: Maximized Emissions Time: 09:25:41 Tested By: Don Nguyen Sequence#: 1 Software: EMITest 5.03.12 Equipment Tested: Device Manufacturer Model # S/N Configuration 1 Support Equipment: Device Manufacturer Model # S/N Configuration 1 Test Conditions / Notes: The EUT is a radio module installed inside a host (tablet) which is placed on a Styrofoam platform. The EUT is programmed to transmit continuously at 99% duty cycle. Radio module has two antennas active at the same time. The tablet is running on fully charged battery. The EUT is rotated in three orthogonal axes. Data represent the worst-case orientation. Modulation: OFDM Mode: 802.11a Operating frequency: 5180, 5200, 5220, 5240MHz Firmware power setting: 8dBm Radio Module: Limited modular approved module PCII to add new antenna 2x2 MIMO, 2.21dBi gain. Scanned frequency: 5150-5250 MHz RBW=1MHz, VBW=3MHz Temperature: 22.3°C Relative Humidity: 52.3% Site A Test Method: ANSI C63.10 (2013) KDB 789033 D02, December 14, 2017 Page 14 of 21 Report No.: 101836-3

Test Equipment: ID Asset # Description Model Calibration Date Cal Due Date T1 AN00786 Preamp 83017A 5/12/2018 5/12/2020 T2 AN00849 Horn Antenna 3115 3/14/2018 3/14/2020 T3 ANP07139 Cable ANDL1- 3/4/2019 3/4/2021 PNMNM-48 T4 ANP07247 Cable 32022-29094K- 7/5/2018 7/5/2020 29094K-24TC T5 AN02869 Spectrum Analyzer E4440A 8/10/2018 8/10/2019 Measurement Data: Reading listed by margin. Test Distance: 3 Meters # Freq Rdng T1 T2 T3 T4 Dist Corr Spec Margin Polar T5 MHz dBµV dB dB dB dB Table dBµV/m dBµV/m dB Ant 1 5250.001M 60.3 -37.5 +33.9 +5.0 +0.3 +0.0 62.0 68.2 -6.2 Horiz +0.0 integration method 2 5150.000M 44.4 -37.5 +33.8 +4.9 +0.3 +0.0 45.9 54.0 -8.1 Horiz +0.0 Page 15 of 21 Report No.: 101836-3

Test Setup Photo(s) Below 1GHz Page 16 of 21 Report No.: 101836-3

Above 1GHz Page 17 of 21 Report No.: 101836-3

X Axis Y Axis Page 18 of 21 Report No.: 101836-3

Z Axis Page 19 of 21 Report No.: 101836-3

SUPPLEMENTAL INFORMATION Measurement Uncertainty Uncertainty Value Parameter 4.73 dB Radiated Emissions 3.34 dB Mains Conducted Emissions 3.30 dB Disturbance Power Uncertainties reported are worst case for all CKC Laboratories’ sites and represent expanded uncertainties expressed at approximately the 95% confidence level using a coverage factor of k=2. Compliance is deemed to occur provided measurements are below the specified limits. Emissions Test Details TESTING PARAMETERS Unless otherwise indicated, the following configuration parameters are used for equipment setup: The cables were routed consistent with the typical application by varying the configuration of the test sample. Interface cables were connected to the available ports of the test unit. The effect of varying the position of the cables was investigated to find the configuration that produced maximum emissions. Cables were of the type and length specified in the individual requirements. The length of cable that produced maximum emissions was selected. The equipment under test (EUT) was set up in a manner that represented its normal use, as shown in the setup photographs. Any special conditions required for the EUT to operate normally are identified in the comments that accompany the emissions tables. The emissions data was taken with a spectrum analyzer or receiver. Incorporating the applicable correction factors for distance, antenna, cable loss and amplifier gain, the data was reduced as shown in the table below. The corrected data was then compared to the applicable emission limits. Preliminary and final measurements were taken in order to ensure that all emissions from the EUT were found and maximized. CORRECTION FACTORS The basic spectrum analyzer reading was converted using correction factors as shown in the highest emissions readings in the tables. For radiated emissions in dBµV/m, the spectrum analyzer reading in dBµV was corrected by using the following formula. This reading was then compared to the applicable specification limit. Individual measurements were compared with the displayed limit value in the margin column. The margin was calculated based on subtracting the limit value from the corrected measurement value; a positive margin represents a measurement exceeding the limit, while a negative margin represents a measurement less than the limit. SAMPLE CALCULATIONS Meter reading (dBµV) + Antenna Factor (dB/m) + Cable Loss (dB) - Distance Correction (dB) - Preamplifier Gain (dB) = Corrected Reading (dBµV/m) Page 20 of 21 Report No.: 101836-3

TEST INSTRUMENTATION AND ANALYZER SETTINGS The test instrumentation and equipment listed were used to collect the emissions data. A spectrum analyzer or receiver was used for all measurements. Unless otherwise specified, the following table shows the measuring equipment bandwidth settings that were used in designated frequency bands. For testing emissions, an appropriate reference level and a vertical scale size of 10 dB per division were used. MEASURING EQUIPMENT BANDWIDTH SETTINGS PER FREQUENCY RANGE TEST BEGINNING FREQUENCY ENDING FREQUENCY BANDWIDTH SETTING CONDUCTED EMISSIONS 150 kHz 30 MHz 9 kHz RADIATED EMISSIONS 9 kHz 150 kHz 200 Hz RADIATED EMISSIONS 150 kHz 30 MHz 9 kHz RADIATED EMISSIONS 30 MHz 1000 MHz 120 kHz RADIATED EMISSIONS 1000 MHz >1 GHz 1 MHz SPECTRUM ANALYZER/RECEIVER DETECTOR FUNCTIONS The notes that accompany the measurements contained in the emissions tables indicate the type of detector function used to obtain the given readings. Unless otherwise noted, all readings were made in the "positive peak" detector mode. Whenever a "quasi-peak" or "average" reading was recorded, the measurement was annotated with a "QP" or an "Ave" on the appropriate rows of the data sheets. In cases where quasi-peak or average limits were employed and data exists for multiple measurement types for the same frequency then the peak measurement was retained in the report for reference, however the numbering for the affected row was removed and an arrow or caret (“^”) was placed in the far left-hand column indicating that the row above takes precedence for comparison to the limit. The following paragraphs describe in more detail the detector functions and when they were used to obtain the emissions data. Peak In this mode, the spectrum analyzer or receiver recorded all emissions at their peak value as the frequency band selected was scanned. By combining this function with another feature called "peak hold," the measurement device had the ability to measure intermittent or low duty cycle transient emission peak levels. In this mode the measuring device made a slow scan across the frequency band selected and measured the peak emission value found at each frequency across the band. Quasi-Peak Quasi-peak measurements were taken using the quasi-peak detector when the true peak values exceeded or were within 2 dB of a quasi-peak specification limit. Additional QP measurements may have been taken at the discretion of the operator. Average Average measurements were taken using the average detector when the true peak values exceeded or were within 2 dB of an average specification limit. Additional average measurements may have been taken at the discretion of the operator. If the specification or test procedure requires trace averaging, then the averaging was performed using 100 samples or as required by the specification. All other average measurements are performed using video bandwidth averaging. To make these measurements, the test engineer reduces the video bandwidth on the measuring device until the modulation of the signal is filtered out. At this point, the measuring device is set into the linear mode and the scan time is reduced. Page 21 of 21 Report No.: 101836-3


Document Created: 2019-09-06 21:27:04
Document Modified: 2019-09-06 21:27:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC