test report_15.207_rss gen conducted emissions ac power

FCC ID: U4GJNGW

Test Report

Download: PDF
FCCID_3211617

PARTIAL T E S T R E P O R T No.: 2-20842790-15-10d According to: FCC Regulations Subpart 15C, Part 15.207 IC-Regulations RSS-Gen, Issue 4 for Datalogic ADC S.r.l. JOYA TOUCH: P00AN04HL0HT0W7-GR0 JOYA TOUCH Type : P00AN04HL0GT0W7-GRR JOYA TOUCH: P00AN04HL0GT0W7-GRR FCC-ID: U4GJNGWB IC: 3862E-JNGWB PMN: JOYA TOUCH HVIN: JNG P HH / JNG P GUN Laboratory Accreditation and Listings Voluntary Controls for Industry Canada Electromagnetic Emissions Reg. No.: MRA US-EU 0003 Reg. No.: 3462D-2 R-2666 C-2914, Reg. No.: 3462D-3 T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: info@cetecom.com • Internet: www.cetecom.com Page 1 of 17 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM

Test Report 2-20842790-15-10d, Page 2 of 17 Table of contents 1. SUMMARY OF TEST RESULTS................................................................................................................... 3 1.1. TEST OVERVIEW ACCORDING FCC PART 15B AND CANADIAN RSS- OR ICES STANDARDS . 3 2. ADMINISTRATIVE DATA ............................................................................................................................ 4 2.1. Identification of the testing laboratory .......................................................................................................... 4 2.2. Test location ................................................................................................................................................. 4 2.3. Organizational items ..................................................................................................................................... 4 2.4. Applicant’s details ........................................................................................................................................ 4 2.5. Manufacturer’s details .................................................................................................................................. 4 3. EQUIPMENT UNDER TEST (EUT) .............................................................................................................. 5 3.1. EUT: Type, S/N etc. and short descriptions used in this test report ............................................................. 5 3.2. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions ............................................................... 5 3.3. EUT set-ups .................................................................................................................................................. 5 3.4. EUT operating modes ................................................................................................................................... 6 3.5. Additional declaration and description of AE1............................................................................................. 6 3.6. Configuration of cables used for testing ....................................................................................................... 7 4. DESCRIPTION OF TEST SYSTEM SET-UP’S ........................................................................................... 8 4.1. Test system set-up for AC power-line conducted emission measurements .................................................. 8 5. MEASUREMENTS .......................................................................................................................................... 9 5.1. General Limit - Conducted emissions on AC-Power lines ...................................................................... 9 6. MEASUREMENT UNCERTAINTIES......................................................................................................... 10 7. ABBREVIATIONS USED IN THIS REPORT ............................................................................................ 11 8. ACCREDITATION DETAILS OF CETECOM’S LABORATORIES AND TEST SITES .................... 11 9. INSTRUMENTS AND ANCILLARY ........................................................................................................... 12 9.1. Used equiment “CTC” ................................................................................................................................ 12 10. VERSIONS OF TEST REPORTS (CHANGE HISTORY) ...................................................................... 15 11. MEASUREMENT DIAGRAMS .................................................................................................................. 16 Table of annex The listed attachments are an integral part of this report Total pages Annex 1: External photographs of EUT (separate document TR2-20842790-15-10d-Annex1) 9 Annex 2: Internal photographs of EUT (separate document) none Annex 3: Test set-up photographs (separate document TR2-20842790-15-10d-Annex 3) 3 The listed attachments are an integral part of this report. TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 3 of 17 1. Summary of test results The test results apply exclusively to the test samples as presented in this Report. The CETECOM GmbH does not assume responsibility for any conclusions and generalizations taken in conjunction with other specimens or samples of the type of the item presented to tests. The test results apply exclusively to the test samples as presented in this Report. The CETECOM GmbH does not assume responsibility for any conclusions and generalizations taken in conjunction with other specimens or samples of the type of the item presented to tests. Also we refer on special conditions which the applicant should fulfill according §2.927 to §2.948, special focus regarding modification of the equipment and availability of sample equipment for market surveilance tests. The Equipment Under Test (in this report, hereinafter referred as EUT) is a digital device with support of radiofrequency technologies. A typical operating mode was tested according intended use of the equipment. Following tests have been performed to show compliance with applicable FCC Part 15, Subpart C (Intentional Radiators) of the CFR 47 Rules, Edition 4th November 2015 and Canadian RSS-Gen, Issue 4 standard. 1.1. TEST OVERVIEW ACCORDING FCC PART 15B AND CANADIAN RSS- OR ICES STANDARDS No. of References, Standards & Limits EUT Test EUT Diagram Port op- Result Cases FCC IC Limits set-up group mode AC Power Lines RSS-Gen, Issue 4 AC  Class A 1 §15.207 Chapter 8.8 , 1 1 Pass Conducted Power lines  Class B Table 3 emissions 0.15 – 30 MHz Remark: Digital unterschrieben von Rachid Digitally signed by christian. Acharkaoui lorenz@cetecom.com DN: cn=Rachid Acharkaoui, DN: cn=christian. o=CETECOM GmbH, ou=RC&EMC, email=rachid.acharkaoui@cetecom. lorenz@cetecom.com com, c=DE Date: 2016.10.28 11:38:51 Datum: 2016.10.31 11:38:56 +01'00' +02'00' ...................................................... .................................................... Dipl.-Ing. Rachid Acharkaoui Dipl.-Ing. C. Lorenz Responsible for test section Responsible for test report TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 4 of 17 2. Administrative Data 2.1. Identification of the testing laboratory Company name: CETECOM GmbH Address: Im Teelbruch 116 45219 Essen - Kettwig Germany Responsible for testing laboratory: Dipl.-Ing. Rachid Acharkaoui Deputy: Dipl.-Ing. Niels Jeß 2.2. Test location 2.2.1. Test laboratory “CTC” Company name: see chapter 2.1. Identification of the testing laboratory 2.3. Organizational items Responsible for test report : MSc. Ajit Phadtare Project leader: Dipl.-Ing. V. Krueger Receipt of EUT: 2016-02-29 Date(s) of test: 2016-03-03 to 2016-10-10 Date of report: 2016-10-28 ----------------------------------------------------------------------------------------------------------------------------------------------------- Version of template: 13.02 2.4. Applicant’s details Applicant’s name: Datalogic ADC S.r.l. Address: Via S. Vitalino, 13 40012, Lippo di Calderara di Reno (BO) ITALY Contact person: Mr. Eucarpio Guarisco 2.5. Manufacturer’s details Manufacturer’s name: please see Applicant's details Address: please see Applicant's details TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 5 of 17 3. Equipment under test (EUT) 3.1. EUT: Type, S/N etc. and short descriptions used in this test report Short S/N HW SW descrip- EUT Type serial number hardware status software status tion*) SW Type : Beta HW Version:WEC7 EUT A JOYA TOUCH P00AN04HL0GT0W7 Z16P00014 Version Firmware -GRR P/N:911350013 Version: 2.16 SW Beta HW P00AN04HL0HT0W7 Version:WEC7 EUT B JOYA TOUCH Z16P00044 Version -GR0 Firmware P/N:911350015 Version: 2.16 SW Beta HW P00AN04HL0GT0W7 Version:WEC7 EUT C JOYA TOUCH Z16P00015 Version -GRR Firmware P/N: 9113500013 Version: 2.16 *) EUT short description is used to simplify the identification of the EUT in this test report. 3.2. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions AE S/N HW SW short Auxiliary Equipment Type serial number hardware status software status descrip- tion *) Beta 2 HW Type : Version JOYA TOUCH 3- Firmware AE 1 P00AN04HL0GT0W7 Z15P00991 SLOT CRADLE P/N:91ACC00 Version: 1.1.1 -GRR 43 AC/DC Adapter 230 V AC 50 331210680014 AE 2 EA10681U-120 Hz to 12VDC 6 -- EDACPOWER ELEC C3 A *) AE short description is used to simplify the identification of the auxiliary equipment in this test report. 3.3. EUT set-ups EUT set-up Combination of EUT and AE Remarks no.*) EUT A + EUT B + EUT C + AE 1 AC Power Lines Conducted emissions. All 3 EUTs set. 1 + AE 2 were set in the craddle (AE1). *) EUT set-up no. is used to simplify the identification of the EUT set-up in this test report. TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 6 of 17 3.4. EUT operating modes EUT Description of operating Additional information operating modes mode no.*) With help of Instructions given in “JOYANG_Test- Tools_Quick_Start_Instructions_rev20160422” Activated transmitters on EUT A to EUT B in order to check for repercussion on AC-mains emission, if wireless modes are activated:  WLAN 2.4 GHz transmitter functions Transmitter op. 1  WLAN 5 GHz transmitter functions Functions Mode  Bluetooth transmitter functions Other possible wireless technologies were completely deactivated in this mode  NFC (not tested within this test report)  battery charging option (WPC) (not tested within this test report) *) EUT operating mode no. is used to simplify the test report. 3.5. Additional declaration and description of AE1 (Applicant's declaration,  = not selected,  = selected)  table-top typical use typical operating cycle of EUT. EUT A to EUT C  floor-standing  portable use  < 0.5 sec.  wall-mounted  fixed use  :  not defined  vehicular use  Residential, commercial and light industry Place of use  Industrial environment  vehicular uses Highest internal frequency generated by EUT  less than 108 MHz -> up to 1 GHz and required upper frequency of radiated  108 MHz - 500 MHz -> up to 2 GHz** disturbance measurement (**Assumed frequency range No declaration from manufacturer)  500 MHz - 1 GHz -> up to 5 or 6 GHz Power line: EUT-grounding:  L1,  L2,  L3,  N  none (in case of deviation during tests the  AC 120 V AC 60 Hz (for AE 1) single details are described on  24V,  120V,  400V  with power supply chapter 4)  DC  12V for EUT A (from AE1)  additional: Other Ports possible total cable length shielding connected during test (description of interconnecting cables) Connector  < 3m > 3m  screened  yes -- --  : other  unscreened  no Does EUT contain devices susceptible to magnetic fields, e.g. Hall elements, electrodynamics  yes microphones, etc.?  no  yes Is mounting position / usual operating position defined?  no TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 7 of 17 3.6. Configuration of cables used for testing Cable S/N HW Cable length number Item Type serial number hardware status Cable 1 -- -- -- -- -- TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 8 of 17 4. Description of test system set-up’s 4.1. Test system set-up for AC power-line conducted emission measurements Specification: ANSI C63.4-2014 chapter 7, ANSI C63.10-2013chapter 6.2 General Description: The radio frequency voltage conducted back into the AC power line in the frequency range 150 kHz to 30 MHz has to be investigated. Compliance should be tested by measuring the radio frequency voltage between each power line and ground at the power terminals in the stated frequency range. A 50 Ohm / 50 µH line impedance stabilization network (LISN) is used coupling the interface to the measurement equipment. The EUT power input leads are connected through the LISN to the AC-power source. The LISN enclosure is electrically connected to the ground plane. The measuring instrument is connected to the coaxial output of the LISN. Tabletop devices were set-up on a 80 cm height above reference ground plane, floor standing equipment 10 cm raised above ground plane. Measurements have been performed on each phase line and neutral line of the devices AC-power lines. The EUT was power supplied with 110 V/60 Hz. The EUT was tested in the defined operating mode and installed (connected) to accessory equipment according the general description of use given by the applicant. Schematic: Only schematic view, we refer to figure 6, 7 and 8 of ANSI C63.4-2009 for more details. Testing method: Exploratory, preliminary measure- Final testing for power phases and ments as a first step, determines the critical frequencies (Margin to AV- or QP worst-case phase line (neutral or phase) limit lower than 3 dB) as a second step as well as the most critical operating includes measurements with receivers mode of the equipment. A complete detector set to Quasi-Peak and Average. frequency-sweep with PK-Detector is performed on each current-carrying conductor. Formula: VC= VR + CL (1) VC = measured Voltage –corrected value M= LT-VC (2) VR = Receiver reading CL = Cable loss M = Margin LT = Limit Values are in dB, positive margin means value is below limit. TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 9 of 17 5. Measurements 5.1. General Limit - Conducted emissions on AC-Power lines 5.1.1. Test location and equipment test location  CETECOM Essen (Chapter 2.2.1)  Please see Chapter 2.2.2  Please see Chapter 2.2.3 test site  333 EMI field  348 EMI cond. receiver  001 ESS  377 ESCS 30  489 ESU 40  620 ESU 26 LISN  005 ESH2-Z5  007 ESH3-Z6  300 ESH3-Z5 & 50 used for AE  no LISN for AE signaling  392 MT8820A  436 CMU  547 CMU  594 CMW line voltage  12 VDC (for EUT A to EUT C supplied from AE1)  060 120 V 60 Hz via PAS 5000 (for AE1) 5.1.2. Requirements FCC Part 15, Subpart C, IC §15.207 Issue 4, Chapter 8.8, Table 3 RSS-Gen ANSI C63.4-2014, § 5.2, 6, 7 Frequency  Conducted limit Class B [MHz] QUASI-Peak [dBµV] AVERAGE [dBµV] Limit 0.15 – 0.5 66 to 56* 56 to 46* 0.5 – 5 56 46 5 – 30 60 50 Remark: * decreases with the logarithm of the frequency 5.1.3. Test condition and test set-up Signal link to test system (if used):  air link  cable connection  none EUT-grounding  none  with power supply  additional connection Equipment set up  table top  floor standing (40 cm distance to reference EUT stands isolated on reference ground plane (floor) ground plane (wall) Climatic conditions Temperature: (22±3°C) Rel. humidity: (40±20)%  9 – 150 kHz, RBW = 200 Hz, Step = 61 Hz Scan data  150 kHz – 30 MHz RBW = 9 kHz, Step = 4 kHz EMI-Receiver or  other: Analyzer settings Scan-Mode 6 dB EMI-Receiver Mode Pre-measurement Peak detector, Repetitive-Scan, max-hold, sweep-time 50 µs per frequency point Final measurement Average & Quasi-peak detector at critical frequencies General measurement procedures Please see chapter “Test system set-up for AC power line conducted emissions measurements” 5.1.4. Measurement results The results are presented below in summary form only. For more information please see the diagrams Set-up no.: 1 EUT OP-mode no.: 1 Diagram- Power Result Used Detector Additional (scan-) information Remarks No. line Activated Transmitters on EUT  Peak (pre-scan) A to EUT C: 1.01  AV (final) L1/ N o WLAN 2.4 GHz Remark 1) Pass  QP (final) o WLAN 5 GHz o Bluetooth Remarks: 1.) For further details please refer chapter 11.1 for test result diagrams 2.) Please refer Annex TR2-20842790-15-10d-Annex3 for relevant test setup photographs TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 10 of 17 6. Measurement uncertainties The reported uncertainties are calculated based on the standard uncertainty multiplied with the appropriate coverage factor k, such that a confidence level of approximately 95% is achieved. For uncertainty determination, each component used in the concrete measurement set-up was taken in account and it’s contribution to the overall uncertainty according it’s statistical distribution calculated. Following table shows expectable uncertainties for each measurement type performed. Calculated uncertainty based on a RF-Measurement Reference Frequency range Remarks confidence level of 95% Conducted emissions 9 kHz - 150 kHz 4.0 dB CISPR 16-2-1 - (U CISPR) 150 kHz - 30 MHz 3.6 dB Radiated emissions 30 MHz - 1 GHz 4.2 dB CISPR 16-2-3 E-Field Enclosure 1 GHz - 18 GHz 5.1 dB Disturbance power CISPR 16-2-2 30 MHz - 300 MHz - - Substitution Power Output radiated - 30 MHz - 4 GHz 3.17 dB method Cel- Cel- Set-up No. BT1 W1 W2 -- C1 C2 Power Output conducted - 9 kHz - 12.75 GHz N/A 0.60 0.7 0.25 N/A -- - 12.75 - 26.5GHz N/A 0.82 -- N/A N/A -- Conducted emissions - 9 kHz - 2.8 GHz 0.70 N/A 0.70 N/A 0.69 -- N/A - not on RF-port 2.8 GHz - 12.75GHz 1.48 N/A 1.51 N/A 1.43 -- applicable 12.75 GHz - 18GHz 1.81 N/A 1.83 N/A 1.77 -- 18 GHz - 26.5GHz 1.83 N/A 1.85 N/A 1.79 -- 0.1272 ppm (Delta Marker) Frequency Occupied bandwidth - 9 kHz - 4 GHz error 1.0 dB Power - 0.1272 ppm (Delta Marker) Frequency Emission bandwidth 9 kHz - 4 GHz error - See above: 0.70 dB Power Frequency stability - 9 kHz - 20 GHz 0.0636 ppm - 150 kHz - 30 MHz 5.0 dB Magnetic Radiated emissions 30 MHz - 1 GHz 4.2 dB field - Enclosure 1 GHz - 20 GHz 3.17 dB E-field Substitution Table: measurement uncertainties, valid for conducted/radiated measurements TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 11 of 17 7. Abbreviations used in this report The abbreviations ANSI American National Standards Institute AV , AVG, CAV Average detector EIRP Equivalent isotropically radiated power, determined within a separate measurement EGPRS Enhanced General Packet Radio Service EUT Equipment Under Test FCC Federal Communications Commission, USA IC Industry Canada n.a. not applicable Op-Mode Operating mode of the equipment PK Peak RBW resolution bandwidth RF Radio frequency RSS Radio Standards Specification, Dokuments from Industry Canada Rx Receiver TCH Traffic channel Tx Transmitter QP Quasi peak detector VBW Video bandwidth ERP Effective radiated power 8. Accreditation details of CETECOM’s laboratories and test sites Ref.- Accreditation Valid for laboratory area or test site No. Certificate Accreditation Body - D-PL- DAkkS, Deutsche All laboratories and test sites of CETECOM GmbH, Essen 12047-01-01 Akkreditierungsstelle GmbH 337 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) FCC, Federal Communications 487 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) (MRA US-EU Commission 558 Radiated Measurements above 1 GHz, 3 m (FAR) 0003) Laboratory Division, USA 348 Mains Ports Conducted Interference Measurements 348 Telecommunication Ports Conducted Interference Measurem. 337 3462D-1 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) 487 3462D-2 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) IC, Industry Canada Certification 550 3462D-2 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) and Engineering Bureau 558 3462D-3 Radiated Measurements above 1 GHz, 3 m (FAR) 487 R-2666 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) VCCI, Voluntary Control Council 550 G-301 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) for Interference by Information 348 C-2914 Mains Ports Conducted Interference Measurements Technology Equipment, Japan 348 T-1967 Telecommunication Ports Conducted Interference Measurem. OATS = Open Area Test Site, SAR = Semi Anechoic Room, FAR = Fully Anechoic Room TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 12 of 17 9. Instruments and Ancillary 9.1. Used equiment “CTC” The “Ref.-No” in the left column of the following tables allows the clear identification of the laboratory equipment. 9.1.1. Test software and firmware of equipment Ref.-No. Equipment Type Serial-No. Version of Firmware or Software during the test 001 EMI Test Receiver ESS 825132/017 Firm.= 1.21 , OTP=2.0, GRA=2.0 012 Signal Generator (EMS-cond.) SMY 01 839069/027 Firm.= V 2.02 013 Power Meter (EMS cond.) NRVD 839111/003 Firm.= V 1.51 017 Digital Radiocommunication Tester CMD 60 M 844365/014 Firmware = V 3.52 .22.01.99, DECT = D2.87 13.01.99 053 Audio Analyzer UPA3 860612/022 Firm. V 4.3 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 Firm.= V 3.1DHG 140 Signal Generator SMHU 831314/006 Firm.= 3.21 261 Thermal Power Sensor NRV-Z55 825083/0008 EPROM-Datum 02.12.04, SE EE 1 B 262 Power Meter NRV-S 825770/0010 Firm.= 2.6 263 Signal Generator SMP 04 826190/0007 Firm.=3.21 UNIT Firmware= 4.04, SW-Main=4.04, SW-BBP=1.04, 295 Racal Digital Radio Test Set 6103 1572 SW-DSP=1.02, Hardboot=1.02, Softboot=2.02 R&S Test Firmware =3.53 /3.54 (current Testsoftw. f. 298 Univ. Radio Communication Tester CMU 200 832221/091 all band used 323 Digital Radiocommunication Tester CMD 55 825878/0034 Firm.= 3.52 .22.01.99 335 CTC-EMS-Conducted System EMS Conducted - EMC 32 V 8.52 340 Digital Radiocommunication Tester CMD 55 849709/037 Firm.= 3.52 .22.01.99 355 Power Meter URV 5 891310/027 Firm.= 1.31 365 10V Insertion Unit 50 Ohm URV5-Z2 100880 Eprom Data = 31.03.08 366 Ultra Compact Simulator UCS 500 M4 V0531100594 Firm. UCS 500=001925/3.06a02, rc=ISMIEC 4.10 371 Bluetooth Tester CBT32 100153 CBT V5,30+ SW-Option K55, K57 377 EMI Test Receiver ESCS 30 100160 Firm.= 2.30, OTP= 02.01, GRA= 02.36 378 Broadband RF Field Monitor RadiSense III 03D00013SNO-08 Firm.= V.03D13 389 Digital Multimeter Keithley 2000 0583926 Firm. = A13 (Mainboard) A02 (Display) Firm.= 4.50 #005, IPL=4.01#001,OS=4.02#001, 392 Radio Communication Tester MT8820A 6K00000788 GSM=4.41#013, W-CDMA= 4.54#004, scenario= 4.52#002 R&S Test Firmware Base=5.14, Mess-Software= 436 Univ. Radio Communication Tester CMU 200 103083 GSM:5.14 WCDMA:5.14 (current Testsoftw. F. all band 441 CTC-SAR-EMI Cable Loss System EMI field (SAR) - EMC 32 Version 8.52 442 CTC-SAR-EMS System EMS field (SAR) - EMC 32 Version 8.40 System CTC-FAR-EMI- 443 CTC-FAR-EMI-RSE - Spuri 7.2.5 or EMC 32 Ver. 9.15.00 RSE 444 CTC-FAR-EMS field System-EMS-Field (FAR) - EMC 32 Version 9.15.00 R&S Test Firmware Base=5.14, GSM=5.14 460 Univ. Radio Communication Tester CMU 200 108901 WCDMA=5.14 (current Testsoftw.,f. all band to be used, 489 EMI Test Receiver ESU40 1000-30 Firmware=4.43 SP3, Bios=V5.1-16-3, Spec. =01.00 491 ESD Simulator dito ESD dito dito307022 V 2.30 524 Voltage Drop Simulator VDS 200 0196-16 Software Nr: 000037 Version V4.20a01 526 Burst Generator EFT 200 A 0496-06 Software Nr. 000034 Version V2.32 527 Micro Pulse Generator MPG 200 B 0496-05 Software-Nr. 000030 Version V2.43 528 Load Dump Simulator LD 200B 0496-06 Software-Nr. 000031 Version V2.35a01 R&S Test Firmware Base=5.14, GSM=5.14 546 Univ. Radio Communication Tester CMU 200 106436 WCDMA=5.14 (current Testsoftw.,f. all band to be used R&S Test Firmware Base=V5.1403 (current Testsoftw., 547 Univ. Radio Communication Tester CMU 200 835390/014 f. all band used, GSM = 5.14 WCDMA: = 5.14 584 Spectrum Analyzer FSU 8 100248 2.82_SP3 R&S Test Firmware Base=5.01, GSM=5.02 WCDMA= 597 Univ. Radio Communication Tester CMU 200 100347 not installed, Mainboard= µP1=V.850 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Firmware Bios 3.40 , Analyzer 3.40 Sp 2 620 EMI Test Receiver ESU 26 100362 4.43_SP3 642 Wideband Radio Communication Tester CMW 500 126089 Setup V03.26, Test programm component V03.02.20 670 Univ. Radio Communication Tester CMU 200 106833 µP1 =V8.50, Firmware = V.20 689 Vector Signal Generator SMU200 100970 02.20.360.142 CBT V 5.40, FW: V.2.41 (FPGA Digital, V. 3.09 FPGA 692 Bluetooth Tester CBT 32 100236 RF) TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 13 of 17 9.1.2. Single instruments and test systems Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 001 EMI Test Receiver ESS 825132/017 Rohde & Schwarz 12 M - 30.05.2017 005 AC - LISN (50 Ohm/50µH, test site 1) ESH2-Z5 861741/005 Rohde & Schwarz 12 M - 30.05.2017 007 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 892563/002 Rohde & Schwarz 12 M - 30.05.2017 009 Power Meter (EMS-radiated) NRV 863056/017 Rohde & Schwarz 24 M - 30.04.2017 016 Line Impedance Simulating Network Op. 24-D B6366 Spitzenberger+Spies 36 M - 30.05.2019 020 Horn Antenna 18 GHz (Subst 1) 3115 9107-3699 EMCO 36/12 M - 31.03.2017 021 Loop Antenna (H-Field) 6502 9206-2770 EMCO 36 M - 30.04.2018 030 Loop Antenna (H-field) HFH-Z2 879604/026 Rohde & Schwarz 36 M - 30.04.2018 033 RF-current probe (100kHz-30MHz) ESH2-Z1 879581/18 Rohde & Schwarz 24 M - 30.04.2017 057 relay-switch-unit (EMS system) RSU 494440/002 Rohde & Schwarz pre-m 1a 060 power amplifier (DC-2kHz) PAS 5000 B6363 Spitzenberger+Spies - 3 WRCT 1900/2200-5/40- 066 notch filter (WCDMA; FDD1) 5 Wainwright GmbH 12 M 1g 30.06.2016 10EEK 086 DC - power supply, 0 -10 A LNG 50-10 - Heinzinger Electronic pre-m 2 087 DC - power supply, 0 -5 A EA-3013 S - Elektro Automatik pre-m 2 091 USB-LWL-Converter OLS-1 007/2006 Ing. Büro Scheiba - 4 099 passive voltage probe ESH2-Z3 299.7810.52 Rohde & Schwarz 36 M - 30.04.2018 100 passive voltage probe Probe TK 9416 without Schwarzbeck 36 M - 30.04.2018 110 USB-LWL-Converter OLS-1 - Ing. Büro Scheiba - 4 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 BOCONSULT 36 M - 30.05.2019 136 adjustable dipole antenna (Dipole 1) 3121C-DB4 9105-0697 EMCO 36 M - 30.04.2018 140 Signal Generator SMHU 831314/006 Rohde & Schwarz 24 M - 30.05.2018 248 attenuator SMA 6dB 2W - Radiall pre-m 2 249 attenuator SMA 10dB 10W - Radiall pre-m 2 252 attenuator N 6dB 12W - Radiall pre-m 2 256 attenuator SMA 3dB 2W - Radiall pre-m 2 257 hybrid 4031C 04491 Narda pre-m 2 260 hybrid coupler 4032C 11342 Narda pre-m 2 261 Thermal Power Sensor NRV-Z55 825083/0008 Rohde & Schwarz 24 M - 30.05.2018 262 Power Meter NRV-S 825770/0010 Rohde & Schwarz 24 M - 30.05.2018 263 Signal Generator SMP 04 826190/0007 Rohde & Schwarz 36 M - 30.05.2019 265 peak power sensor NRV-Z33, Model 04 840414/009 Rohde & Schwarz 24 M - 30.05.2018 266 Peak Power Sensor NRV-Z31, Model 04 843383/016 Rohde & Schwarz 24 M - 30.05.2018 267 notch filter GSM 850 WRCA 800/960-6EEK 9 Wainwright GmbH pre-m 2 270 termination 1418 N BB6935 Weinschel pre-m 2 271 termination 1418 N BE6384 Weinschel pre-m 2 272 attenuator (20 dB) 50 W Model 47 BF6239 Weinschel pre-m 2 273 attenuator (10 dB) 100 W Model 48 BF9229 Weinschel pre-m 2 274 attenuator (10 dB) 50 W Model 47 (10 dB) 50 W BG0321 Weinschel pre-m 2 275 DC-Block Model 7003 (N) C5129 Weinschel pre-m 2 276 DC-Block Model 7006 (SMA) C7061 Weinschel pre-m 2 279 power divider 1515 (SMA) LH855 Weinschel pre-m 2 287 pre-amplifier 25MHz - 4GHz AMF-2D-100M4G-35-10P 379418 Miteq 12 M 1c 30.06.2017 291 high pass filter GSM 850/900 WHJ 2200-4EE 14 Wainwright GmbH 12 M 1c 30.06.2017 298 Univ. Radio Communication Tester CMU 200 832221/091 Rohde & Schwarz pre-m 3 300 AC LISN (50 Ohm/50µH, 1-phase) ESH3-Z5 892 239/020 Rohde & Schwarz 12 M - 30.05.2017 301 attenuator (20 dB) 50W, 18GHz 47-20-33 AW0272 Lucas Weinschel pre-m 2 302 horn antenna 40 GHz (Meas 1) BBHA9170 155 Schwarzbeck 36 M - 31.03.2017 303 horn antenna 40 GHz (Subst 1) BBHA9170 156 Schwarzbeck 36 M - 31.03.2017 331 Climatic Test Chamber -40/+80 Grad HC 4055 43146 Heraeus Vötsch Pre-m 2 341 Digital Multimeter Fluke 112 81650455 Fluke 24 M - 30.05.2018 342 Digital Multimeter Voltcraft M-4660A IB 255466 Voltcraft 24 M - 30.04.2017 347 laboratory site radio lab. - - - 5 348 laboratory site EMI conducted - - - 5 354 DC - Power Supply 40A NGPE 40/40 448 Rohde & Schwarz pre-m 2 355 Power Meter URV 5 891310/027 Rohde & Schwarz 24 M - 30.05.2018 357 power sensor NRV-Z1 861761/002 Rohde & Schwarz 24 M - 30.04.2017 371 Bluetooth Tester CBT32 100153 R&S 36 M - 30.05.2019 373 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 100535 Rohde & Schwarz 12 M - 30.05.2017 377 EMI Test Receiver ESCS 30 100160 Rohde & Schwarz 12 M - 30.05.2017 389 Digital Multimeter Keithley 2000 0583926 Keithley 24 M - 30.04.2017 392 Radio Communication Tester MT8820A 6K00000788 Anritsu 12 M - 30.05.2017 431 Model 7405 Near-Field Probe Set 9305-2457 EMCO - 4 436 Univ. Radio Communication Tester CMU 200 103083 Rohde & Schwarz 12 M - 30.04.2017 439 UltraLog-Antenna HL 562 100248 Rohde & Schwarz 36 M - 31.03.2017 System CTC-FAR-EMI- ETS-Lindgren / 443 CTC-FAR-EMI-RSE - 12 M 5 30.06.2017 RSE CETECOM WRCT 1850.0/2170.0- Wainwright Instruments 448 notch filter WCDMA_FDD II 5 12 M 1c 30.06.2017 5/40- GmbH TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 14 of 17 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due WRCT 824.0/894.0-5/40- 449 notch filter WCDMA FDD V 1 Wainwright 12 M 1c 30.06.2017 8SSK 454 Oscilloscope HM 205-3 9210 P 29661 Hameg - 4 456 DC-Power supply 0-5 A EA 3013 S 207810 Elektro Automatik pre-m 2 459 DC -Power supply 0-5 A , 0-32 V EA-PS 2032-50 910722 Elektro Automatik pre-m 2 460 Univ. Radio Communication Tester CMU 200 108901 Rohde & Schwarz 12 M - 30.04.2017 463 Universal source HP3245A 2831A03472 Agilent - 4 466 Digital Multimeter Fluke 112 89210157 Fluke USA 24 M - 30.05.2018 467 Digital Multimeter Fluke 112 89680306 Fluke USA 36 M - 30.04.2018 468 Digital Multimeter Fluke 112 90090455 Fluke USA 36 M - 30.04.2018 477 ReRadiating GPS-System AS-47 - Automotive Cons. Fink - 3 480 power meter (Fula) NRVS 838392/031 Rohde & Schwarz 24 M - 30.04.2017 482 filter matrix Filter matrix SAR 1 - CETECOM (Brl) - 1d AMF-5D-02501800-25- 484 pre-amplifier 2,5 - 18 GHz 1244554 Miteq 12 M - 30.06.2017 10P System EMI field (SAR) ETS Lindgren / 487 System CTC NSA-Verification SAR-EMI - 24 M - 31.07.2017 NSA CETECOM 489 EMI Test Receiver ESU40 1000-30 Rohde & Schwarz 12 M - 30.05.2017 WRCG 1709/1786- 502 band reject filter SN 9 Wainwright pre-m 2 1699/1796- 503 band reject filter WRCG 824/849-814/859- SN 5 Wainwright pre-m 2 WRCA 800/960-02/40- 512 notch filter GSM 850 SN 24 Wainwrght 12 M 1c 30.06.2017 6EEK 517 relais switch matrix HF Relais Box Keithley SE 04 Keithley pre-m 2 523 Digital Multimeter L4411A MY46000154 Agilent 24 M - 30.04.2017 529 6 dB Broadband resistive power divider Model 1515 LH 855 Weinschel pre-m 2 530 10 dB Broadband resistive power divider R 416110000 LOT 9828 - pre-m 2 546 Univ. Radio Communication Tester CMU 200 106436 R&S 12 M - 30.05.2017 547 Univ. Radio Communication Tester CMU 200 835390/014 Rohde & Schwarz 12 M - 30.04.2017 549 Log.Per-Antenna HL025 1000060 Rohde & Schwarz 36/12 M - 31.07.2018 System CTC S-VSWR Verification SAR- System EMI Field SAR S- ETS 550 - 24 M - 31.07.2017 EMI VSWR Lindgren/CETECOM 552 high pass filter 2,8-18GHz WHKX 2.8/18G-10SS 4 Wainwright 12 M 1c 30.06.2017 557 System CTC-OTA-2 R&S TS8991 - Rohde & Schwarz 12 M 5 30.09.2016 System CTC FAR S- 558 System CTC FAR S-VSWR - CTC 24 M - 19.04.2017 VSWR 574 Biconilog Hybrid Antenna BTA-L 980026L Frankonia 36/12 M - 31.03.2019 584 Spectrum Analyzer FSU 8 100248 Rohde & Schwarz pre-m - 594 Wideband Radio Communication Tester CMW 500 101757 Rohde & Schwarz 12 M - 30.04.2017 597 Univ. Radio Communication Tester CMU 200 100347 Rohde & Schwarz pre-m - 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Rohde & Schwarz 24 M - 30.04.2017 600 power meter NRVD (Reserve) 834501/018 Rohde & Schwarz 24 M - 30.04.2017 601 medium-sensitivity diode sensor NRV-Z5 (Reserve) 8435323/003 Rohde & Schwarz 24 M - 30.04.2017 602 peak power sensor NRV-Z32 (Reserve) 835080 Rohde & Schwarz 24 M - 611 DC power supply E3632A KR 75305854 Agilent pre-m 2 612 DC power supply E3632A MY 40001321 Agilent pre-m 2 613 Attenuator R416120000 20dB 10W Lot. 9828 Radiall pre-m 2 616 Digitalmultimeter Fluke 177 88900339 Fluke 24 M - 30.05.2018 617 Power Splitter/Combiner ZFSC-2-2-S+ S F987001108 Mini Circuits - 2 618 Power Splitter/Combiner 50PD-634 600994 JFW Industries USA - 2 619 Power Splitter/Combiner 50PD-634 600995 JFW Industries, USA - 3 620 EMI Test Receiver ESU 26 100362 Rohde-Schwarz 12 M - 30.05.2017 621 Step Attenuator 0-139 dB RSP 100017 Rohde & Schwarz pre-m 2 625 Generic Test Load USB Generic Test Load USB - CETECOM - 2 201.0999.9302.6.4.1.4 627 data logger OPUS 1 G. Lufft GmbH 24 M - 30.04.2017 3 634 Spectrum Analyzer FSM (HF-Unit) 826188/010 Rohde & Schwarz pre-m 2 HDMI cable with Ethernet 637 High Speed HDMI with Ethernet 1m - KogiLink - 2 1m 638 HDMI Kabel with Ethernet 1,5 m flach HDMI cable with Ethernet - Reichelt - 2 640 HDMI cable 2m rund HDMI cable 2m rund - Reichelt - 2 641 HDMI cable with Ethernet Certified HDMI cable with - PureLink - 2 644 Amplifierer ZX60-2534M+ SN865701299 Mini-Circuits - - 670 Univ. Radio Communication Tester CMU 200 106833 Rohde & Schwarz 24 M - 30.05.2018 671 DC-power supply 0-5 A EA-3013S - Elektro Automatik pre-m 2 678 Power Meter NRP 101638 Rohde&Schwarz pre-m - 683 Spectrum Analyzer FSU 26 200571 Rohde & Schwarz 12 M - 30.05.2017 Narda Safety Test 686 Field Analyzer EHP-200A 160WX30702 24 M - 30.04.2017 Solutions 687 Signal Generator SMF 100A 102073 Rohde&Schwarz 12 M - 30.05.2017 688 Pre Amp JS-18004000-40-8P 1750117 Miteq pre-m - 690 Spectrum Analyzer FSU 100302/026 Rohde&Schwarz 12 M - 30.05.2017 692 Bluetooth Tester CBT 32 100236 Rohde & Schwarz 36 M - 31.03.2017 TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 15 of 17 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 697 Power Splitter ZN4PD-642W-S+ 165001445 Mini-Circuits - 2 9.1.3. Legend Note / remarks Calibrated during system calibration: 1a System CTC-SAR-EMS (Ref.-No. 442) 1b System-CTC-EMS-Conducted (Ref.-No. 335) 1c System CTC-FAR-EMI-RSE (Ref.-No . 443) 1d System CTC-SAR-EMI (Ref.-No . 441) 1e System CTC-OATS (EMI radiated) (Ref.-No. 337) 1f System CTC-CTIA-OTA (Ref.-No . 420) 1g System CTC-FAR-EMS (Ref.-No . 444) 2 Calibration or equipment check immediately before measurement 3 Regulatory maintained equipment for functional check or support purpose 4 calibrationequipment Ancillary of this equipment without has no effect calibration onmechanical e.g. measuring equipment result or monitoring equipment 5 Test System Interval of calibration 12 M 12 month 24 M 24 month 36 M 36 month 24/12 M Calibration every 24 months, between this every 12 months internal validation 36/12 M Calibration every 36 months, between this every 12 months internal validation Pre-m Check before starting the measurement - Without calibration 10. Versions of test reports (change history) Version Applied changes Date of release -- Initial release 2016-10-28 -- -- -- -- -- -- TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 16 of 17 11. Measurement diagrams Diagram No.: 1.01_Transmitter Functions_ Conducted emissions Common Information Test Description: Conducted Voltage Measurement Class B Test Site & Location: Conducted Emission, CETECOM GmbH Essen Test Software: R&S EMC32 v9.15 Test Specification: FCC 15.207 Operating Mode: Transmitter Functions Mode ( WLAN 2.4 GHz +WLAN 5GHz +Bluetooth) Measured on line: N/L1 Diagram details: Shows the peak values as a sum of measured ports in maxhold mode Environmental Conditions: Humidity: 48%rH; Temperature: 21°C Operator: HLa Test Mode: Cradle with AC/DC Power Supply & Fully charged terminals inserted in all three slots JOYA TOUCHTerminals: Slot 1: EUT Type :P00AN04HL0HT0W7-GR0 | S/N:Z16P00044 Slot 2:EUT Type :P00AN04HL0GT0W7-GRR | S/N:Z16P00014 Slot 3:EUT Type :P00AN04HL0GT0W7-GRR | S/N:Z16P00015 EUT Information Manufacturer: Datalogic ADCL S.r.l. MODEL: JOYA TOUCH 3-SLOT CRADLE EuT Type: -- P/N: 91ACC0043 S/N: Z15P00991 HW Version: Beta 2 Firmware Version: 1.1.1 Input: 12VDC 6 A using AC/DC Adapter AC/DC Adapter Type: 100-240 VAC-2.0A 50-60Hz to 12VDC 6 A AC/DC Adapter Model: EA10681U-120 AC/DC Manufacturer: EDACPOWER ELEC. EuT Mode: Transmitter Functions Mode ( WLAN 2.4 GHz +WLAN 5GHz +Bluetooth) F u ll S p e c tru m 90 80 70 C la s s B V o lta g e Q P 60 Level in dBµV C la s s B V o lta g e A V 50 40 30 20 10 0 150k 3 0 0 4 0 05 0 0 8 0 01 M 2M 3M 4M 5M 6 8 10M 20M 30M F re q u e n c y in H z TR2_20842790_15_10d

Test Report 2-20842790-15-10d, Page 17 of 17 Final_Result Frequency QuasiPeak CAverage Limit Margin Line PE (MHz) (dBµV) (dBµV) (dBµV) (dB) 0.181250 --- 39.88 54.43 14.55 L1 GND 0.181250 45.78 --- 64.43 18.65 L1 GND 0.200781 --- 38.07 53.58 15.51 L1 GND 0.200781 44.32 --- 63.58 19.26 L1 GND 0.239844 --- 38.16 52.10 13.94 L1 GND 0.239844 43.40 --- 62.10 18.70 L1 GND 0.263281 --- 34.43 51.33 16.90 L1 GND 0.263281 39.76 --- 61.33 21.57 L1 GND 0.298438 --- 33.80 50.29 16.49 L1 GND 0.298438 39.09 --- 60.29 21.20 L1 GND 0.427344 --- 34.50 47.30 12.80 L1 GND 0.427344 39.71 --- 57.30 17.59 L1 GND 0.474219 --- 35.13 46.44 11.31 L1 GND 0.474219 40.37 --- 56.44 16.07 L1 GND 1.278906 --- 25.55 46.00 20.45 L1 GND 1.278906 29.92 --- 56.00 26.08 L1 GND 6.181250 38.89 --- 60.00 21.11 N GND 6.181250 --- 34.63 50.00 15.37 N GND 18.060156 30.74 --- 60.00 29.26 L1 GND 18.060156 --- 26.39 50.00 23.61 L1 GND TR2_20842790_15_10d


Document Created: 2016-10-31 11:38:56
Document Modified: 2016-10-31 11:38:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC