Cover Letter - UNII declaration

FCC ID: U4GFX4WB

Cover Letter(s)

Download: PDF
FCCID_3768928

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 U-NII Device Declaration Letter Date: February 1st, 2018 To whom it may concern We have declared below featured for FCC equipment authorization, Device FCC ID: U4GFX4WB (1) DFS Device -- Master , Client with Radar detection capability, Client without radar detection capability, N/A C.F. - P. IVA - Registro delle Imprese di Bologna 03217801202 I R.E.A. Bologna 501477 I Capitale sociale 10.000.000,00 euro i.v. Via San Vitalino, 13 I 40012 Lippo di Calderara di Reno I Bologna I Italy I Tel. +39 051 3147011 I Fax +39 051 3147288 (2) Active / Passive Scanning , ad hoc mode access point capability Frequency Active Passive Ad Hoc Mode Access point Band Scanning scanning or WIFI Direct capability Datalogic S.r.l. Società con socio unico I Gruppo Datalogic I Direzione e Coordinamento Datalogic S.p.A. (MHz) (the device can (where the capability transmit a device is can probe listen only with (beacon)) no probes) 2412 - 2462MHz Yes , No Yes , No Yes , No Yes No 5180 - 5240MHz Yes , No Yes , No Yes , No Yes , No 5260 - 5320MHz Yes , No Yes , No Yes , No Yes , No 5500 - 5700MHz Yes , No Yes , No Yes , No Yes , No 5745 - 5825MHz Yes , No Yes , No Yes , No Yes , No (3) Country code selection ability - Yes , No If yes, pls explain how it was implemented : Country code cannot be modified or selected by the end-user. www.datalogic.com (4) Meet 15.202 requirement Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply Does not apply , (If apply , pls help to provide explanation on it was implement , and how software was controlled): Country code, passive/active scanning channels, DFS functionality are configured by embedded Software in the operative system which is not accessible to any third Party (e.g. end user, installers). See also Software Security for U-NII Devices document.


Document Created: 2018-02-02 15:57:50
Document Modified: 2018-02-02 15:57:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC