Clibration

FCC ID: U4GFX3P

RF Exposure Info

Download: PDF
FCCID_2382515

ANNEX A Calibration Documents Test Report No.: G0M-1407-3954-TFC093S-V06 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 43 of 104

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client Eurofins Certificate No: DAE3—522_Sep13 CALIBRATION CERTIFICATE Object DAE3 — SD 000 DO3 AA — SN: 522 Calibration procedure(s) QA CAL—06.v26 Calibration procedure for the data acquisition electronics (DAE) Calibration date: September 11, 2013 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Keithley Multimeter Type 2001 SN: 0810278 02—Oct—12 (No:12728) Oct—13 Secondary Standards ID # Check Date (in house) Scheduled Check Auto DAE Calibration Unit SE UWS 053 AA 1001 07—Jan—13 (in house check) In house check: Jan—14 Calibrator Box V2.1 SE UMS 006 AA 1002 07—Jan—13 (in house check) In house check: Jan—14 Name Function Signature Calibrated by: R.Mayoraz Technician A iAz_$ Approved by: Fin Bomholt Deputy Technical Manager NEl Issued: September11, 2013 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: DAE3—522_Sep13 Page 1 of 5

Calibration Laboratory of aNl/4 Schweizerischer Kalibrierdienst Schmid & Partner iia%;//fi Service suisse d‘étalonnage Engineering AG o ie Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland 2 //r_\\\ w Swiss Calibration Service Ti abe®® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary DAE data acquisition electronics Connector angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters e DC Voltage Measurement: Calibration Factor assessed for use in DASY system by comparison with a calibrated instrument traceable to national standards. The figure given corresponds to the full scale range of the voltmeter in the respective range. e Connector angle: The angle of the connector is assessed measuring the angle mechanically by a tool inserted. Uncertainty is not required. e The following parameters as documented in the Appendix contain technical information as a result from the performance test and require no uncertainty. DC Voltage Measurement Linearity: Verification of the Linearity at +10% and —10% of the nominal calibration voltage. Influence of offset voltage is included in this measurement. Common mode sensitivity: Influence of a positive or negative common mode voltage on the differential measurement. Channel separation: Influence of a voltage on the neighbor channels not subject to an input voltage. AD Converter Values with inputs shorted: Values on the internal AD converter corresponding to zero input voltage Input Offset Measurement: Output voltage and statistical results over a large number of zero voltage measurements. Input Offset Current: Typical value for information; Maximum channel input offset current, not considering the input resistance. Input resistance: Typical value for information: DAE input resistance at the connector, during internal auto—zeroing and during measurement. Low Battery Alarm Voltage: Typical value for information. Below this voltage, a battery alarm signal is generated. Power consumption: Typical value for information. Supply currents in various operating modes. Certificate No: DAE3—522_Sep13 Page 2 of 5

DC Voltage Measurement A/D — Converter Resolution nominal High Range: 1LSB= 6.1uV , full range = —100...+300 mV Low Range: 1LSB= 61nV , full range = ~1....... +3mV DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Calibration Factors X Y¥ Z High Range 404.235 + 0.02% (k=2) 403.905 + 0.02% (k=2) 404.733 + 0.02% (k=2) Low Range 3.96415 + 1.50% (k=2) 3.95903 + 1.50% (k=2) 3.97308 + 1.50% (k=2) Connector Angle Connector Angle to be used in DASY system §70°4 1° Certificate No: DAE3—522_Sep13 Page 3 of 5

Appendix 1. DC Voltage Linearity High Range Reading (uV) Difference (uV) Error (%) Channel X + Input 199994.84 —1.61 —0.00 Channel X + Input 20002.41 2M 0.01 Channel X — Input ~19996.48 4.99 —0.02 Channel Y + Input 199996.01 —0.32 —0.00 Channel Y + Input 20000.12 0.00 0.00 Channel Y — Input ~19996.80 4.74 —0.02 Channel Z + Input 199996.36 —0.14 —0.00 Channel Z + Input 19999.47 —0.63 —0.00 Channel Z — Input —20000.32 1.29 —0.01 Low Range Reading (uV) Difference (uV) Error (%) Channel X + Input 2000.73 0.37 0.02 Channel X + Input 202.12 1.52 0.76 Channel X — Input —198.07 1.15 —0.58 Channel Y + Input 2000.27 —0.12 —0.01 Channel Y + Input 200.27 —0.32 —0.16 Channel Y — Input ~199.53 —0.32 0.16 Channel Z + Input 2000.40 0.21 0.01 Channel Z + Input 199.46 ~1.06 —0.53 Channel Z2 — Input —200.31 —0.98 0.49 2. Common mode sensitivity DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Common mode High Range Low Range Input Voltage (mV) Average Reading (uV) Average Reading (uV) Channel X 200 —3.46 5.15 —200 6.33 5.03 Channel Y 200 —0.62 —0.84 —200 ~1.40 ~1.23 Channel Z 200 17.02 16.63 —200 —16.85 ~17.55 3. Channel separation DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Input Voltage (mV) Channel X (uV) Channel Y (uV) Channel Z (uV) Channel X 200 — —2.55 —1.42 Channel Y 200 7.66 — —0.32 Channel Z 200 6.37 4.74 — Certificate No: DAE3—522_Sep13 Page 4 of 5

4. AD—Converter Values with inputs shorted DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec High Range (LSB) Low Range (LSB) Channel X 15741 16839 Channel Y 15715 14908 Channel Z 16057 16580 5. Input Offset Measurement DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Input 10MQ Average (uV) min. Offset (uV) max. Offset (uV) Std: |(3:\\I/;ation Channel X 1.14 —0.51 2.54 0.62 Channel Y —0.99 —2.51 0.31 0.52 Channel Z 0.68 —0.45 2.23 0.54 6. Input Offset Current Nominal Input circuitry offset current on all channels: <25fA 7. Input Resistance (Typical values for information) Zeroing (kOhm) Measuring (MOhm) Channel X 200 200 Channel Y 200 200 Channel Z 200 200 8. Low Battery Alarm Voltage (Typical values for information) Typical values Alarm Level (VDC) Supply (+ Vec) +7.9 Supply (— Vec) —7.6 9. Power Consumption (Typical values for information) Typical values Switched off (mA) Stand by (mA) Transmitting (mA) Supply (+ Vec) +0.01 +6 +14 Supply (— Vec) —0.01 —8 —9 Certificate No: DAE3—522_Sep13 Page 5 of 5


Document Created: 2014-09-03 13:11:58
Document Modified: 2014-09-03 13:11:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC