MEMOR_10_QSG_HE_20190903

FCC ID: U4GDL35US

Users Manual

Download: PDF
FCCID_4504271

Datalogic S.r.l. Via San Vitalino 13 Out of the Box Top View 40012 Calderara di Reno (BO) The Memor 10 package contains: Italy Memor 10 PDA Tel. +39 051 3147011 Fax +39 051 3147205 Memor™ 10   Rechargeable one-piece battery pack USB Type-C cable ©2018-2019 Datalogic S.p.A. and/or its affiliates Rugged Mobile Computer Handstrap  All rights reserved.  Without limiting the rights under copyright, no part of this documentation may be with 1D/2D Imager Quick Start Guide Data Capture reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or Safety & Regulatory Addendum Window for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of End User License Agreement (EULA) Sheet Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this Remove all the components from their packaging; check their integrity and documentation for the purchaser’s own internal business purposes. Purchaser shall not remove or alter compare them with all the packing documents. any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic Side View versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided on Keep the original packaging for use when sending products to the appropriate media. If you visit our website and would like to make comments or suggestions about this or technical assistance center. Damage caused by improper packaging other Datalogic publications, please let us know via the "Contact Datalogic" page. is not covered under the warranty. CAUTION Disclaimer Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior Power Button General View Volume Control notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, Buttons including the U.S.A. and the E.U. Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may be trademarks of their respective owners. Google, Google Play and other marks are trademarks of Google Right Trigger Left Trigger LLC. Front View Patents USB Type-C Port See www.patents.datalogic.com for patent list. Good Read Charging LED Indicator Quick Start Guide 822002752 (Rev. A) July. 2019 Touch Panel Display Reference Documentation Battery Installation For further information regarding Memor 10 refer to the SDK Help on-line and to the Memor 10 User’s Manual, downloadable from our website www.datalogic.com. Support Through the Website 1. Rotate the latches to the open position: Datalogic provides several services as well as technical support through its website. See the Safety & Regulatory Addendum Back Recent Log on to www.datalogic.com and click on the SUPPORT link which gives you access to: included with your product for additional Downloads by selecting your product model from the dropdown list in the Search by Product field for regulatory, safety and legal information. specific Data Sheets, Manuals, Software & Utilities, and Drawings; 中文版快速使用指南及法律折页，请见 Home Repair Program for On-Line Return Material Authorizations (RMAs) plus Repair Center contact information; Datalogic 官网: www.datalogic.com Customer Service containing details about Maintenance Agreements; Technical Support through email or phone. The chinese version of the Quick Start Guide and the Safety & Regulatory Warranty Terms and Conditions addendum is downloadable from the Datalogic website: www. datalogic.com Back View The warranty period is 1 year for the device and 90 days for consumables (e.g. battery, power supply, cable (see Support Through the Website). 2. Insert the battery pack into the slot, bottom first, and press it into place: etc.) from date of purchase at our company. TOF Sensor Speaker SIM Card ©2018-2019 Datalogic S.p.A. and/or its LED Flash Socket affiliates. All rights reserved. Datalogic and the Datalogic logo are registered Battery MicroSD Card trademarks of Datalogic S.p.A. in many Swap LED Socket countries, including the U.S. and the E.U. 3. Rotate the latches to the lock position to lock the cover: www.datalogic.com

Charging Instructions Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the slot Scanning and Imaging The battery pack is not initially fully charged. After installing the battery, charge it with the USB Type-C or with a dock (single slot dock, 3-slot dock, vehicle dock, 4-slot battery charger). of any of the docks. Do not apply any sticker to the Memor 10 (see the examples below). Imager Data Capture During the charging process the charging LED positioned at the top left side of the display glows red CAUTION constantly. Once the charging process has been completed, the charging LED glows green constantly. Charge with USB Use the provided USB Type-C cable in conjunction with the power supply adapter (p/n 94ACC0196) to charge the device from a power outlet. The charger is modular, with one adapter and five switchover plugs. For information on the single slot dock/ 3-slot dock/ vehicle dock/ 4-slot battery charger refer to the Quick Start Guide included in the dock's box. NOTE The Memor 10 may get warm during charging. This is normal and does not mean a malfunction. You can also use the USB cable to charge the Memor 10 from any self-powered USB hub or USB port on a computer. NOTE LINEAR BARCODE 2D MATRIX SYMBOL SIM Card Installation 1. Turn off the Memor 10 or put it in swap battery mode (refer to the User’s Manual for more details). 2. Remove the battery pack (see Battery Installation): 3. Insert the SIM card with the written part upward. Relative Size and Location of Aiming System Pattern LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT MAX OUTPUT RADIATION 1mW EMITTED WAVE LENGTH 630-680nm 5ms PULSE Use only the Datalogic power supply 94ACC0196 to power the Memor 10. IEC/EN 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance CAUTION with IEC 60825-1 Ed.3.,as described in Laser Notice No.56,dated May 8,2019 2D Imager Data Capture To scan a bar code symbol: 4. Replace the battery (see Battery Installation). 1. Point the scan window at the bar code. Charge with the Dock 2. Press one of the scan triggers. A blue-violet spot illuminates the symbol, which is captured and Insert the device into the dock with the screen facing front and the head facing up. decoded. If the scan has been successful:  If enabled, the good read beep plays. MicroSD Card Installation  If enabled, the GreenSpot projects a green spot onto the bar code image.  If enabled, the good read indicator positioned at the top left side of the display glows solid green. 1. Turn off the Memor 10 or put it in swap battery mode (refer to the User’s Manual for more details). 2. Remove the battery pack (see Battery Installation): 3. Insert the microSD card with the written part upward. Use only the Datalogic power supply 94ACC0197 to power any of the docks. CAUTION 4. Replace the battery (see Battery Installation).


Document Created: 2019-09-03 11:28:44
Document Modified: 2019-09-03 11:28:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC