I19D00091-SRD04-2G3G

FCC ID: U4GDL35US

Test Report

Download: PDF
FCCID_4441276

TEST REPORT No. I19D00091-SRD04 For Client : Datalogic S.r.l. Production : Smartphone Model Name : MEMOR 10 Brand Name : Datalogic FCC ID : U4GDL35US Hardware Version : V00 (US) Software Version : 2.00.05.20190726 Issued date : 2019-08-06

Report No.: I19D00091-SRD04 NOTE 1. The test results in this test report relate only to the devices specified in this report. 2. This report shall not be reproduced except in full without the written approval of East China Institute of Telecommunications. 3. KDB 971168 D01 has not been accredited by A2LA. 4. For the test results, the uncertainty of measurement is not taken into account when judging the compliance with specification, and the results of measurement or the average value of measurement results are taken as the criterion of the compliance with specification directly. Test Laboratory: East China Institute of Telecommunications Add: 7-8F, G Area, No.668, Beijing East Road, Huangpu District, Shanghai, P. R. China Tel: +86 21 63843300 FAX: +86 21 63843301 E-Mail: welcome@ecit.org.cn East China Institute of Telecommunications Page Number: 2 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 Revision Version Report Number Revision Date Memo I19D00091-SRD04 00 2019-08-06 Initial creation of test report East China Institute of Telecommunications Page Number: 3 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 CONTENTS 1. TEST LABORATORY............................................................................................................................... 6 1.1. TESTING LOCATION ........................................................................................................................... 6 1.2. TESTING ENVIRONMENT ................................................................................................................... 6 1.3. PROJECT DATA................................................................................................................................... 6 1.4. SIGNATURE ......................................................................................................................................... 6 2. CLIENT INFORMATION........................................................................................................................... 7 2.1.APPLICANT INFORMATION ................................................................................................................ 7 2.2.MANUFACTURER INFORMATION ...................................................................................................... 7 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................................ 8 3.1.ABOUT EUT .......................................................................................................................................... 8 3.2.INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................................... 8 3.3.INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ...................................................... 8 4. REFERENCE DOCUMENTS ................................................................................................................... 9 4.1.DOCUMENTS SUPPLIED BY APPLICANT ......................................................................................... 9 4.2.REFERENCE DOCUMENTS FOR TESTING ....................................................................................... 9 5. TEST RESULTS ..................................................................................................................................... 10 5.1.SUMMARY OF TEST RESULTS ......................................................................................................... 10 5.2.STATEMENTS...................................................................................................................................... 10 6. TEST EQUIPMENTS UTILIZED ............................................................................................................ 11 6.1.CONDUCTED TEST SYSTEM ............................................................................................................ 11 6.2.RADIATED EMISSION TEST SYSTEM .............................................................................................. 11 7. MEASUREMENT UNCERTAINTY ......................................................................................................... 13 8. TEST ENVIRONMENT ........................................................................................................................... 14 ANNEX A. MEASUREMENT RESULTS................................................................................................ 15 ANNEX A.1.RADIATED ............................................................................................................................. 15 East China Institute of Telecommunications Page Number: 4 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

ECIT

Report No.: I19D00091-SRD04 1. Test Laboratory 1.1. Testing Location Company Name: ECIT Shanghai, East China Institute of Telecommunications Address: 7-8/F., Area G, No.668, Beijing East Road, Shanghai, China Postal Code: 200001 Telephone: (+86)-021-63843300 Fax: (+86)-021-63843301 FCC registration No 958356 1.2. Testing Environment Normal Temperature: 15℃-35℃ Relative Humidity: 25%-75% 1.3. Project data Project Leader: Yu Anlu Testing Start Date: 2019-06-22 Testing End Date: 2019-06-24 1.4. Signature Wang Liang Fan Songyan (Prepared this test report) (Reviewed this test report) Zheng Zhongbin (Approved this test report) East China Institute of Telecommunications Page Number: 6 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 2. Client Information 2.1. Applicant Information Company Name Datalogic S.r.l. Address Via San Vitalino no. 13, Calderara di Reno – 40012 (BO) - Italy Telephone +39 051 314 72 16 Postcode / 2.2. Manufacturer Information Company Name Datalogic S.r.l. Address Via San Vitalino no. 13, Calderara di Reno – 40012 (BO) - Italy Telephone +39 051 314 72 16 Postcode / East China Institute of Telecommunications Page Number: 7 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Production Smartphone Model name MEMOR 10 GSM Frequency Band GSM850/GSM900/GSM1800/GSM1900 UMTS Frequency Band BandⅠ/BandⅡ/BandⅣ/BandⅤ/BandⅧ CDMA Frequency Band BC0/BC1 LTE Frequency Band LTE2/4/5/7/12/13/17/25/26 Extreme Temperature -30/+50℃ Nominal Voltage 3.8V Extreme High Voltage 4.35V Extreme Low Voltage 3.6V Note: a. Photographs of EUT are shown in ANNEX A of this test report. b. The value of the antenna gain is provided by the customer. For specific antenna information, please check the antenna specifications of the customer. 3.2. Internal Identification of EUT used during the test EUT ID* SN or IMEI HW Version SW Version Date of receipt N01 359737090067954 V00 (US) 2.00.05.20190726 2019-06-18 N03 359737090067947 V00 (US) 2.00.05.20190726 2019-06-18 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE used during the test AE ID* Description Type Manufacturer AE1 RF cable --- AE1 *AE ID: is used to identify the test sample in the lab internally. East China Institute of Telecommunications Page Number: 8 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 4. Reference Documents 4.1. Documents supplied by applicant All technical documents are supplied by the client or manufacturer, which is the basis of testing. 4.2. Reference Documents for testing The following documents listed in this section are referred for testing. Reference Title Version FREQUENCY ALLOCATIONS AND RADIO TREATY FCC Part 2 2018-10-01 MATTERS; GENERAL RULES AND REGULATIONS FCC Part 22 PUBLIC MOBILE SERVICES 2018-10-01 FCC Part 24 PERSONAL COMMUNICATIONS SERVICES 2018-10-01 Land Mobile FM or PM Communications Equipment ANSI-TIA-603-E 2016 Measurement and Performance Standards American National Standard of Procedures for Compliance ANSI C63.26 2015 Testing of Licensed Transmitters Used in Licensed Radio Measurement Guidance for Certification of Licensed Digital KDB 971168 D01 v03r01 Transmitters East China Institute of Telecommunications Page Number: 9 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 5. Test Results 5.1. Summary of Test Results Measurement Items Sub-clause Verdict Emission Limit 2.1051/22.917/24.238/22.913/24.232 P Note: please refer to Annex A in this test report for the detailed test results. The following terms are used in the above table. P Pass, the EUT complies with the essential requirements in the standard. NP Not Perform, the test was not performed by ECIT. NA Not Applicable, the test was not applicable. F Fail, the EUT does not comply with the essential requirements in the standard. 5.2. Statements The MEMOR 10,supporting GSM/WCDMA/LTE.etc,manufactured by Datalogic S.r.l. is a variant product for testing.ECIT only performed test cases which identified with Pass/Fail/Inc result in section 5. ECIT has verified that the compliance of the tested device specified in section 3 of this test report is successfully evaluated according to the procedure and test methods as defined in type certification requirement listed in section 4 of this test report. Note: This project is a variant of I18D00022-SRD04 original report. We only retest and report the EIRP and radiation test data. For other information, please refer to the original report. East China Institute of Telecommunications Page Number: 10 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 6. Test Equipments Utilized 6.1. Conducted Test System No. Equipment Model SN Manufacture Cal.date Cal.interval Spectrum 1 FSQ26 101096 R&S 2019-05-10 1 year Analyzer Universal 2 Radio CMU200 123124 R&S 2019-05-10 1 year Communicatio n Tester DC Power LOC-220Z 1 year 3 ZUP60-14 TDL-Lambda 2019-05-10 Supply 006-0007 6.2. Radiated Emission Test System The test equipment and ancillaries used are as follows. No. Equipment Model SN Manufacture Cal.date Cal.interval Universal Radio 1 CMU200 123123 R&S 2019-05-10 1 year Communicatio n Tester EMI Test 2 ESU40 100307 R&S 2019-05-10 1 year Receiver TRILOG VULB916 VULB9163 3 Broadband Schwarzbeck 2017-02-25 3 years 3 -515 Antenna Double- ridged 4 ETS-3117 00135890 ETS 2017-01-11 3 years Waveguide Antenna 2-Line 5 ENV216 101380 R&S 2019-05-10 1 year V-Network Substitution A 6 ETS-3117 00135890 ETS 2017-01-11 3 years ntenna East China Institute of Telecommunications Page Number: 11 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 RF Signal 7 SMF100A 102314 R&S 2019-05-10 1 year Generator Substitution A VUBA911 8 9117-266 Schwarzbeck 2017-11-18 3 years ntenna 7 9 Amplifier SCU08 10146 R&S 2019-05-10 1 year Climate chamber No. Equipment Model SN Manufacture Cal.date Cal.interval Climate 1 SH-641 92012011 ESPEC 2017-12-25 2 years chamber East China Institute of Telecommunications Page Number: 12 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 7. Measurement Uncertainty Measurement uncertainty for all the testing in this report are within the limit specified in ECIT documents . The detailed measurement uncertainty is defined in ECIT documents. Measurement Items Range Confidence Level Calculated Uncertainty Maximum Peak Output Power 30MHz-3600MHz 95% ±0.544dB EBW and VBW 30MHz-3600MHz 95% ±62.04Hz Transmitter Spurious 30MHz-2GHz 95% ±0.90dB Emission-Conducted Transmitter Spurious 2GHz-3.6GHz 95% ±0.88dB Emission-Conducted Transmitter Spurious 3.6GHz-8GHz 95% ±0.96dB Emission-Conducted Transmitter Spurious 8GHz-20GHz 95% ±0.94dB Emission-Conducted Transmitter Spurious 9KHz-30MHz 95% ±5.66dB Emission-Radiated Transmitter Spurious 30MHz-1000MHz 95% ±4.98dB Emission-Radiated Transmitter Spurious 1000MHz 95% ±5.06dB Emission-Radiated -18000MHz Transmitter Spurious 18000MHz 95% ±5.20dB Emission-Radiated -40000MHz Frequency stability 1MHz-16GHz 95% ±62.04Hz East China Institute of Telecommunications Page Number: 13 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 8. Test Environment Shielding Room1 (6.0 meters×3.0 meters×2.7 meters) did not exceed following limits along the conducted RF performance testing: Temperature Min. = 15 ℃, Max. = 35 ℃ Relative humidity Min. = 20 %, Max. = 75 % Shielding effectiveness > 100 dB Ground system resistance < 0.5  Control room did not exceed following limits along the EMC testing: Temperature Min. = 15 ℃, Max. = 35 ℃ Relative humidity Min. =25 %, Max. = 75 % Shielding effectiveness > 100 dB Electrical insulation > 10 k Ground system resistance < 0.5  Fully-anechoic chamber1 (6.9 meters×10.9 meters×5.4 meters) did not exceed following limits along the EMC testing: Temperature Min. = 15 ℃, Max. = 35 ℃ Relative humidity Min. = 25 %, Max. = 75 % Shielding effectiveness > 100 dB Electrical insulation > 10 k Ground system resistance < 0.5  VSWR Between 0 and 6 dB, from 1GHz to 18GHz Site Attenuation Deviation Between -4 and 4 dB,30MHz to 1GHz Uniformity of field strength Between 0 and 6 dB, from 80MHz to 3000 MHz East China Institute of Telecommunications Page Number: 14 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 ANNEX A. MEASUREMENT RESULTS ANNEX A.1.RADIATED A.1.1. EIRP A.1.1.1. GSM EIRP A.1.1.1.1. Description This is the test for the maximum radiated power from the EUT. Rule Part 24.232(c) specifies, "Mobile/portable stations are limited to 2 watts e.i.r.p. Peak power” and 24.232(c) specifies that "Peak transmit power must be measured over any interval of continuous transmission using instrumentation calibrated in terms of an rms-equivalent voltage." Rule Part 22.913(a) specifies ” The ERP of mobile transmitters and auxiliary test transmitters must not exceed 7 Watts.” A.1.1.1.2. Method of Measurement The measurements procedures in TIA-603E-2016 are used. 1. EUT was placed on a 1.5 meter high non-conductive stand at a 3 meter test distance from the receive antenna. A receiving antenna was placed on the antenna mast 3 meters from the EUT for emission measurements. The height of receiving antenna is 1.5m. The test setup refers to figure below. Detected emissions were maximized at each frequency by rotating the EUT through 360°and adjusting the receiving antenna polarization. The radiated emission measurements of all transmit frequencies in three channels (High, Middle, Low) were measured with peak detector. 2. The EUT is then put into continuously transmitting mode at its maximum power level during the test. And the maximum value of the receiver should be recorded as (Pr). 3. The EUT shall be replaced by a substitution antenna. The test setup refers to figure below. East China Institute of Telecommunications Page Number: 15 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 In the chamber, an substitution antenna for the frequency band of interest is placed at the reference point of the chamber. An RF Signal source for the frequency band of interest is connected to the substitution antenna with a cable that has been constructed to not interfere with the radiation pattern of the antenna. A power (PMea) is applied to the input of the substitution antenna, and adjust the level of the signal generator output until the value of the receiver reach the previously recorded (Pr). The power of signal source (PMea) is recorded. The test should be performed by rotating the test item and adjusting the receiving antenna polarization. 4. A amplifier should be connected to the Signal Source output port. And the cable should be connected between the Amplifier and the Substitution Antenna. The cable loss (Pcl) ,the Substitution Antenna Gain (Ga) and the Amplifier Gain (PAg) should be recorded after test. The measurement results are obtained as described below: Power(EIRP)=PMea+ PAg- Pcl+ Ga 5. This value is EIRP since the measurement is calibrated using an antenna of known gain (2.15dBi) and known input power. 6. ERP can be calculated from EIRP by subtracting the gain of the dipole, ERP = EIRP -2.15dBi. A.1.1.1.3 GSM 850-ERP 22.913(a) A.1.1.1.3.1 Limits Mode Power Step Burst Peak ERP (dBm) GSM 5 ≤38.45dBm (7W) GPRS 3 ≤38.45dBm (7W) EDGE 6 ≤38.45dBm (7W) A.1.1.1.3.2 Measurement result GSM(GMSK) Frequency PMea Pcl PAg Ga Antenna PeakEIRP Polarization (MHz) (dBm) (dB) (dB) Gain(dBi) (dBm) 848.8 -4.86 3.1 37 3.11 32.15 H GPRS(GMSK) Frequency PMea Pcl PAg Ga Antenna PeakEIRP Polarization (MHz) (dBm) (dB) (dB) Gain(dBi) (dBm) 848.8 -6.05 3.1 37 3.11 30.96 H EDGE(8PSK) East China Institute of Telecommunications Page Number: 16 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 Frequency PMea Pcl PAg Ga Antenna PeakEIRP Polarization (MHz) (dBm) (dB) (dB) Gain(dBi) (dBm) 848.8 -13.16 3.1 37 3.11 23.85 H Frequency: 848.8MHz Peak ERP(dBm)= PMea(-13.16dBm) - Pcl(3.1dB) +PAg(37dB) + Ga(3.11dBd) = 23.85dBm Note: ANALYZER SETTINGS: RBW = VBW = 3MHz A.1.1.1.4 PCS 1900-EIRP 24.232(c) A.1.1.1.4.1 Limits Mode Power Step Burst Peak EIRP (dBm) GSM 5 ≤33dBm (2W) GPRS 3 ≤33dBm (2W) EDGE 6 ≤33dBm (2W) A.1.1.1.4.2 Measurement result GSM(GMSK) Frequency PMea Pcl PAg Ga Antenna PeakEIRP Polarization (MHz) (dBm) (dB) (dB) Gain(dBi) (dBm) 1850.2 -7.40 4.6 36 4.7 28.70 V GPRS(GMSK) Frequency PMea Pcl PAg Ga Antenna PeakEIRP Polarization (MHz) (dBm) (dB) (dB) Gain(dBi) (dBm) 1850.2 -7.47 4.6 36 4.7 28.63 V EDGE(8PSK) Frequency PMea Pcl PAg Ga Antenna PeakEIRP Polarization (MHz) (dBm) (dB) (dB) Gain(dBi) (dBm) 1850.2 -12.60 4.6 36 4.7 26.29 V Frequency: 1850.2MHz Peak EIRP(dBm)= PMea(-12.60dBm) - Pcl(4.6dB)+ PAg(36dB) +Ga(4.7dB)=26.29dBm ANALYZER SETTINGS: RBW = VBW = 3MHz East China Institute of Telecommunications Page Number: 17 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 A.1.1.2. WCDMA EIRP A.1.1.2.1. Description This is the test for the maximum radiated power from the EUT. Rule Part 24.232(c) specifies, "Mobile/portable stations are limited to 2 watts e.i.r.p. Peak power" and 24.232(c) specifies that "Peak transmit power must be measured over any interval of continuous transmission using instrumentation calibrated in terms of an rms-equivalent voltage. "Rule Part 22.913(a) specifies ” The ERP of mobile transmitters and auxiliary test transmitters must not exceed 7 Watts.” A.1.1.2.2. Method of Measurement The measurements procedures in TIA-603E-2016 are used. 1. EUT was placed on a 1.5 meter high non-conductive stand at a 3 meter test distance from the receive antenna. A receiving antenna was placed on the antenna mast 3 meters from the EUT for emission measurements. The height of receiving antenna is 1.5m. The test setup refers to figure below. Detected emissions were maximized at each frequency by rotating the EUT through 360°and adjusting the receiving antenna polarization. The radiated emission measurements of all transmit frequencies in three channels (High, Middle, Low) were measured with peak detector. 2. The EUT is then put into continuously transmitting mode at its maximum power level during the test. And the maximum value of the receiver should be recorded as (Pr). 3. The EUT shall be replaced by a substitution antenna. The test setup refers to figure below. In the chamber, an substitution antenna for the frequency band of interest is placed at the reference point of the chamber. An RF Signal source for the frequency band of interest is connected to the substitution antenna with a cable that has been constructed to not interfere with the radiation pattern of the antenna. A power (PMea) is applied to the input of the substitution antenna, and adjust the level of the signal generator output until the value of the receiver reach the previously recorded (Pr). The power of signal source (PMea) is recorded. The test should be performed by rotating the test item and adjusting the receiving antenna East China Institute of Telecommunications Page Number: 18 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 polarization. 4. A amplifier should be connected to the Signal Source output port. And the cable should be connect between the Amplifier and the Substitution Antenna. The cable loss (Pcl) ,the Substitution Antenna Gain (Ga) and the Amplifier Gain (PAg) should be recorded after test. The measurement results are obtained as described below: Power(EIRP)=PMea+ PAg -Pcl+ Ga 5. This value is EIRP since the measurement is calibrated using an antenna of known gain (2.15 dBi) and known input power. 6. ERP can be calculated from EIRP by subtracting the gain of the dipole, ERP = EIRP -2.15dBi. A.1.1.2.3 WCDMA Band II-ERP Limits Band Burst Peak EIRP (dBm) WCDMA Band II ≤33dBm (2W) A.1.1.2.3.1 Measurement result Frequency PMea Pcl PAg Ga Antenna PeakEIRP Polarization (MHz) (dBm) (dB) (dB) Gain(dBi) (dBm) 1852.4 -21.72 3.54 43.8 2.9 21.44 V Frequency: 1852.4MHz Peak EIRP(dBm)= PMea(-21.72dBm)- Pcl(3.54dB)+ PAg(43.8dB)+Ga(2.9dBi) =21.44dBm ANALYZER SETTINGS: RBW = VBW = 5MHz A.1.1.2.4 WCDMA Band IV-ERP Limits Band Burst Peak EIRP (dBm) WCDMA Band IV ≤33dBm (2W) A.1.1.2.4.1 Measurement result Frequency( PMea Pcl PAg Ga Antenna PeakEIRP Polarization MHz) (dBm) (dB) (dB) Gain(dBi) (dBm) 1752.6 -10.58 4.6 36 2.9 23.72 H Frequency: 1752.6 MHz Peak EIRP(dBm)= PMea(-11.83dBm)- Pcl(4.6dB)+PAg(36dB)+Ga(2.9dBd)=24.46dBm ANALYZER SETTINGS: RBW = VBW = 5MHz A.1.1.2.5 WCDMA Band V-ERP Limits Band Burst Peak ERP (dBm) WCDMA Band V ≤38.45dBm (7W) East China Institute of Telecommunications Page Number: 19 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 A.1.1.2.5.1 Measurement result Frequency PMea Pcl PAg Ga Antenna PeakEIRP Polarization (MHz) (dBm) (dB) (dB) Gain(dBi) (dBm) 846.6 -15.62 3.1 37 2.9 21.18 H Frequency: 846.6MHz Peak ERP(dBm)= PMea(-15.62dBm)- Pcl(3.1dB)+PAg(37dB)+Ga(2.9dBd)=21.18dBm ANALYZER SETTINGS: RBW = VBW = 5MHz Note: the EUT was displayed in several different direction, the worst cases were shown. East China Institute of Telecommunications Page Number: 20 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 A.1.2 EMISSION LIMIT (§2.1051/§22.917§24.238) A.1.2.1 GSM Measurement Method The measurement procedures in TIA-603E-2016are used. The spectrum was scanned from 30 MHz to the 10th harmonic of the highest frequency generated within the equipment, which is the transmitted carrier that can be as high as 1910 MHz. The resolution bandwidth is set as outlined in Part 24.238 and Part 22.917. The spectrum is scanned with the mobile station transmitting at carrier frequencies that pertain to low, mid and high channels of PCS1900 and GSM850. A.1.2.2 The procedure of radiated spurious emissions is as follows: 1. EUT was placed on a 1.5 meter high non-conductive stand at a 3 meter test distance from the receive antenna. A receiving antenna was placed on the antenna mast 3 meters from the EUT for emission measurements. The height of receiving antenna is 1.5m. The test setup refers to figure below. Detected emissions were maximized at each frequency by rotating the EUT through 360°and adjusting the receiving antenna polarization. The radiated emission measurements of all non-harmonic and harmonics of the transmit frequency through the 10thharmonic were measured with peak detector. 2. The EUT is then put into continuously transmitting mode at its maximum power level during the test. And the maximum value of the receiver should be recorded as (Pr). 3. The EUT shall be replaced by a substitution antenna. The test setup refers to figure below. In the chamber, an substitution antenna for the frequency band of interest is placed at the reference point of the chamber. An RF Signal source for the frequency band of interest is connected to the substitution antenna with a cable that has been constructed to not interfere with the radiation pattern of the antenna. A power (PMea) is applied to the input of the substitution antenna, and adjust the level of the signal generator output until the value of the East China Institute of Telecommunications Page Number: 21 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 receiver reach the previously recorded (Pr). The power of signal source (PMea) is recorded. The test should be performed by rotating the test item and adjusting the receiving antenna polarization. 4. The Path loss (Ppl) between the Signal Source with the Substitution Antenna and the Substitution Antenna Gain (Ga) should be recorded after test. A amplifier should be connected in for the test. The Path loss (Ppl) is the summation of the cable loss . The measurement results are obtained as described below: Power(EIRP)=PMea- Ppl+ Ga 5. This value is EIRP since the measurement is calibrated using an antenna of known gain (2.15 dBi) and known input power. 5. ERP can be calculated from EIRP by subtracting the gain of the dipole, ERP = EIRP -2.15dBi A.1.2.3 Measurement Limit Part 24.238 and Part 22.917 specify that the power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The specification that emissions shall be attenuated below the transmitter power (P) by at least 43 + 10 log (P) dB, translates in the relevant power range (1 to 0.001 W) to -13 dBm. At 1 W the specified minimum attenuation becomes 43 dB and relative to a 30 dBm (1 W) carrier becomes a limit of -13 dBm. At 0.001 W (0 dBm) the minimum attenuation is 13 dB, which again yields a limit of -13 dBm. In this way a translation of the specification from relative to absolute terms is carried out. A.1.2.4 Measurement Results Radiated emissions measurements were made only at the upper, middle, and lower carrier frequencies of the GSM850 band(824.2MHz, 836.6MHz, 848.8MHz) . It was decided that measurements at these three carrier frequencies would be sufficient to demonstrate compliance with emissions limits because it was seen that all the significant spurs occur well outside the band and no radiation was seen from a carrier in one block of the GSM850 into any of the other blocks. The equipment must still, however, meet emissions requirements with the carrier at all frequencies over which it is capable of operating and it is the manufacturer's responsibility to verify this. East China Institute of Telecommunications Page Number: 22 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 A.1.2.5 Measurement Results Measurements results: Frequency Channel Frequency Range Result Low 30MHz~10GHz P GSM850 Middle 30MHz~10GHz P High 30MHz~10GHz P GSM Mode Channel 128 Final result: Frequency PMea Pcl Peak ERP Limit Ga (dBd) Polarization (MHz) (dBm) (dBm) (dBm) （dBm） 1860.0 -37.77 4.6 2.9 -39.47 -13 H 2820.0 -33.58 5.7 4.1 -35.18 -13 V 3587.3 -46.18 6.5 4.7 -47.98 -13 H 4487.3 -47.8 7.3 7.3 -47.8 -13 V 5938.8 -49.35 8.5 10.4 -47.45 -13 V 6438.5 -48.45 8.9 11.5 -45.85 -13 V GSM Mode Channel 189 Final result: Frequency PMea Pcl Peak ERP Limit Ga (dBd) Polarization (MHz) (dBm) (dBm) (dBm) （dBm） 1673.6 -42.02 4.3 2.9 -43.42 -13 H 2544.6 -36.07 5.4 3.7 -37.77 -13 V 3687.7 -49.37 6.6 7.7 -48.27 -13 V 5468.1 -49.37 8.1 9.5 -47.97 -13 V 6269.2 -49.08 8.8 10.8 -47.08 -13 H 6936.9 -50.07 9.3 12.9 -46.47 -13 H GSM Mode Channel 251 Final result: Frequency PMea Pcl Peak ERP Limit Ga (dBd) Polarization (MHz) (dBm) (dBm) (dBm) （dBm） 1873.9 -38.08 4.6 2.9 -39.78 -13 H 2701.1 -35.31 5.6 4.1 -36.81 -13 H East China Institute of Telecommunications Page Number: 23 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 3565.4 -47.66 6.4 4.7 -49.36 -13 H 4561.2 -47.58 7.4 7.3 -47.68 -13 H 5372.3 -48.48 8.1 8.7 -47.88 -13 V 6401.5 -49.42 8.9 11.5 -46.82 -13 H East China Institute of Telecommunications Page Number: 24 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 A.8.3 WCDMA Measurement Method The measurements procedures in TIA-603E-2016 are used. The spectrum was scanned from 30 MHz to the 10th harmonic of the highest frequency generated within the equipment. The resolution bandwidth is set as outlined in Part 24.238 and Part 24.917. The spectrum is scanned with the mobile station transmitting at carrier frequencies that pertain to low, mid and high channels of WCDMA Band V. The procedure of radiated spurious emissions is the same like GSM. A.8.3.1 Measurement Limit Part 24.238 and Part 22.917 specify that the power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The specification that emissions shall be attenuated below the transmitter power (P) by at least 43 + 10 log (P) dB, translates in the relevant power range (1 to 0.001 W) to -13 dBm. At 1 W the specified minimum attenuation becomes 43 dB and relative to a 30 dBm (1 W) carrier becomes a limit of -13 dBm. At 0.001 W (0 dBm) the minimum attenuation is 13 dB, which again yields a limit of -13 dBm. In this way a translation of the specification from relative to absolute terms is carried out. A.8.3.2 Measurement Results Radiated emissions measurements were made only at the upper, middle, and lower carrier frequencies of the WCDMA Band II. It was decided that measurements at these three carrier frequencies would be sufficient to demonstrate compliance with emissions limits because it was seen that all the significant spurs occur well outside the band and no radiation was seen from a carrier in one block of the WCDMA Band II into any of the other blocks. The equipment must still, however, meet emissions requirements with the carrier at all frequencies over which it is capable of operating and it is the manufacturer's responsibility to verify this. A.8.3.3 Measurement Results Table Frequency Channel Frequency Range Result Low 30MHz~20GHz P WCDMA Band II Middle 30MHz~20GHz P High 30MHz~20GHz P WCDMA BAND II Mode Channel 4132 Final result: Frequency PMea Pcl Peak ERP Limit Ga (dBd) Polarization (MHz) (dBm) (dBm) (dBm) （dBm） 3972.8 -59.8 6.8 7.7 -58.90 -13 H 4550.0 -58.18 7.4 7.3 -58.28 -13 H 5825.2 -60.32 8.4 10.5 -58.22 -13 V East China Institute of Telecommunications Page Number: 25 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 6418.8 -59.35 8.9 11.5 -56.75 -13 H 8416.4 -63.51 10.2 18.1 -55.61 -13 H 9838.4 -60.41 11.0 18.3 -53.11 -13 V WCDMA BAND II Mode Channel 4183 Final result: Frequency PMea Pcl Peak ERP Limit Ga (dBd) Polarization (MHz) (dBm) (dBm) (dBm) （dBm） 4780.8 -59.34 7.6 7.9 -59.04 -13 V 6376.8 -59.72 8.9 11.5 -57.12 -13 H 9244.0 -61.29 10.6 18.5 -53.39 -13 H 11224.4 -56.36 12.1 18.5 -49.96 -13 H 14343.9 -56.48 13.6 23.5 -46.58 -13 H 16794.6 -48.52 15.8 20.0 -44.32 -13 V WCDMA BAND II Mode Channel 4233 Final result: Frequency PMea Pcl Peak ERP Limit Ga (dBd) Polarization (MHz) (dBm) (dBm) (dBm) （dBm） 4536.0 -58.25 7.4 7.3 -58.35 -13 H 5811.2 -60.16 8.4 10.5 -58.06 -13 H 7538.0 -61.44 9.7 14.6 -56.54 -13 V 9221.2 -61.09 10.5 18.5 -53.09 -13 V 10794.0 -57.28 11.7 17.3 -51.68 -13 V 13321.2 -56.3 13.6 21.8 -48.10 -13 H Conclusion: PASS Note: the EUT was displayed in several different direction, the worst cases were shown. East China Institute of Telecommunications Page Number: 26 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019

Report No.: I19D00091-SRD04 ANNEX B. Accreditation Certificate **********End of the Report********** East China Institute of Telecommunications Page Number: 27 of 27 TEL: +86 21 63843300FAX: +86 21 63843301 Report Issued Date: Aug.06, 2019


Document Created: 2019-09-13 21:24:03
Document Modified: 2019-09-13 21:24:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC