quick srart guide

FCC ID: U4GDL35US

Users Manual

Download: PDF
FCCID_4072923

Datalogic S.r.l. Via San Vitalino 13 Out of the Box Top View 40012 Calderara di Reno (BO) The Memor 10 package contains: Italy yyMemor 10 PDA Tel. +39 051 3147011 Fax +39 051 3147205 Memor™ 10 yyRechargeable battery pack yyUSB Type-C cable ©2018 Datalogic S.p.A. and/or its affiliates Rugged Mobile Computer yyHandstrap w All rights reserved. w Without limiting the rights under copyright, no part of this documentation may be with 1D/2D Imager yyQuick Start Guide Data Capture reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or yySafety & Regulatory Addendum Window for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of yyEnd User License Agreement (EULA) Sheet Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this Remove all the components from their packaging; check their integrity and documentation for the purchaser’s own internal business purposes. Purchaser shall not remove or alter compare them with all the packing documents. any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic Side View versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided on Keep the original packaging for use when sending products to the appropriate media. If you visit our website and would like to make comments or suggestions about this or technical assistance center. Damage caused by improper packaging other Datalogic publications, please let us know via the “Contact Datalogic” page. is not covered under the warranty. CAUTION Disclaimer Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior Power Button General View Volume Control notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, Buttons including the U.S.A. and the E.U. Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may be trademarks of their respective owners. Right Trigger Left Trigger Patents Front View See www.patents.datalogic.com for patent list. USB Type-C Port Good Read Charging LED Indicator Quick Start Guide 822002750 (Rev. A) Sept. 2018 Touch Panel Display Reference Documentation For further information regarding Memor 10 refer to the SDK Help on-line and to the Memor 10 User’s Manual, downloadable from our website www.datalogic.com. Support Through the Website Datalogic provides several services as well as technical support through its website. Back Recent Log on to www.datalogic.com and click on the SUPPORT link which gives you access to: See the Safety & Regulatory Addendum Downloads by selecting your product model from the dropdown list in the Search by Product field for included with your product for additional specific Data Sheets, Manuals, Software & Utilities, and Drawings; regulatory, safety and legal information. Home Repair Program for On-Line Return Material Authorizations (RMAs) plus Repair Center contact information; Customer Service containing details about Maintenance Agreements; Technical Support through email or phone. Warranty Terms and Conditions Back View The warranty period is 1 year for the device and 90 days for consumables (e.g. battery, power supply, cable etc.) from date of purchase at our company. ©2018 Datalogic S.p.A. and/or its TOF Sensor Speaker affiliates. All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many SIM Card countries, including the U.S. and the E.U. LED Flash Socket Battery MicroSD Card Swap LED Socket www.datalogic.com

Battery Installation Charge with the Dock SIM Card Installation Insert the device into the dock with the screen facing front and the head facing up. 1. Rotate the latches to the open position: 1. Turn off the Memor 10 or put it in swap battery mode (refer to the User’s Manual for more details). 2. Remove the battery pack (see Battery Installation): 3. Insert the SIM card with the written part upward. 2. Insert the battery pack into the slot, bottom first, and press it into place: 4. Replace the battery (see Battery Installation). Use only the Datalogic power supply 94ACC0197 to power any of the docks. MicroSD Card Installation 1. Turn off the Memor 10 or put it in swap battery mode (refer to the User’s Manual for more details). CAUTION 2. Remove the battery pack (see Battery Installation): 3. Rotate the latches to the lock position to lock the cover: 3. Insert the microSD card with the written part upward. Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the slot of any of the docks. Do not apply any sticker to the Memor 10 (see the examples below). CAUTION Charging Instructions 4. Replace the battery (see Battery Installation). The battery pack is not initially fully charged. After installing the battery, charge it with the USB Type-C or with a dock (single slot dock, 3-slot dock, vehicle dock, 4-slot battery charger). During the charging process the charging LED positioned at the top left side of the display glows red constantly. Once the charging process has been completed, the charging LED glows green constantly. For information on the single slot dock/ 3-slot dock/ vehicle dock/ 4-slot battery charger refer to the Quick Start Guide included in the dock's box. Scanning and Imaging NOTE Charge with USB 2D Imager Data Capture Use the provided USB Type-C cable in conjunction with the power supply adapter (p/n 94ACC0196) to To scan a bar code symbol: charge the device from a power outlet. 1. Point the scan window at the bar code. The charger is modular, with one adapter and five switchover plugs. The Memor 10 may get warm during charging. This is normal and does not mean a malfunction. 2. Press the scan key. A blue-violet spot illuminates the symbol, which is captured and decoded. If the scan has been successful: NOTE yyIf enabled, the good read beep plays. yyIf enabled, the GreenSpot projects a green spot onto the bar yycode image. yyThe good read indicator positioned at the top left side of the display glows green constantly. You can also use the USB cable to charge the Memor 10 from any self-powered USB hub or USB port on a computer. Use only the Datalogic power supply 94ACC0196 to power the Memor 10. CAUTION


Document Created: 2018-09-25 16:59:02
Document Modified: 2018-09-25 16:59:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC