UNII DOC Letter

FCC ID: U4GA030

Cover Letter(s)

Download: PDF
FCCID_1548826

Date : June 13, 2011 UNII Declaration Letter We have declared below featured for FCC equipment authorization, Device FCC ID: U4GA030 (1) DFS Device -- Master , Client with Radar detection capability , Client without radar detection capability , N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band Active Scanning passive scanning Ad Hoc Mode Access point (MHz) (the device can (where the device is capability capability transmit a probe can listen only with no (beacon)) probes) 2412 – 2473 Yes , No Yes , No Yes , No Yes , No 5150 - 5250 Yes , No Yes , No Yes , No Yes , No 5250 - 5350 Yes , No Yes , No Yes , No Yes , No 5450 - 5725 Yes , No Yes , No Yes , No Yes , No 5725 – 5825 Yes , No Yes , No Yes , No Yes , No (3) Country code selection ability - Yes , No If no, pls explain how was implemented : The domain code was fixed (burned) in EEPROM IC. (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The boot code was fixed (burned) in the WLAN IC and defaults to active scan mode for all 2.4 GHz channels plus all non-DFS 5 GHz channels. 5 GHz channels subject to DFS requirement are passive scan mode that cannot be modified by end user or an installer. Applicant : DATALOGIC MOBILE s.r.l. Address : Via S. Vitalino, 13 - 40012 Lippo di Calderara di Reno (Bologna) - Italy Signature : Name and Job Title. : Paola Chientaroli / Industrial Engineering and Quality Manager E-mail paola.chientaroli@.datalogic.com Tel. +39 051 3147 485


Document Created: 2011-06-13 10:04:28
Document Modified: 2011-06-13 10:04:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC