Test report

FCC ID: U2ZZW4203

Test Report

Download: PDF
FCCID_4253612

FCC TEST REPORT For Z-Wave Outdoor Module 2.0 120VAC Model Number: ZW4203 FCC ID: U2ZZW4203 Report Number : WT198000575 Test Laboratory : Shenzhen Academy of Metrology and Quality Inspection Site Location : No.4 TongFa Road, Xili Town, Nanshan District, Shenzhen, China Tel : 0086-755-86009898 Fax : 0086-755-86009898-31396 Web : www.smq.com.cn

Test report declaration Applicant : SHEENWAY ASIA LTD. Address : Room1313, 13/F., AustinTower, 22-26AustinAvenu, TsimSha Tsui, Kowloon. Hong Kong. China Manufacturer : SHEENWAY ASIA LTD. Address : Room1313, 13/F., AustinTower, 22-26AustinAvenu, TsimSha Tsui, Kowloon. Hong Kong. China EUT Description : Z-Wave Outdoor Module 2.0 120VAC Model No : ZW4203 FCC ID : U2ZZW4203 Test Standards: FCC Part 15 (October 1, 2018 Edition) ANSI C63.10-2013 The EUT described above is tested by Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory to determine the maximum emissions from the EUT. Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory is assumed full responsibility for the accuracy of the test results. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 and the energy emitted by the sample EUT tested as described in this report is in compliance with FCC Rules Part 15.249. The test report is valid for above tested sample only and shall not be reproduced in part without written approval of the laboratory. Project Engineer: Date: Feb.14,2019 (Chen Qichun) Checked by: Date: Feb.14,2019 (Lin Yixiang) Approved by: Date: Feb.14,2019 (Lin Bin) Report No.: WT198000575 Page 2/26

TABLE OF CONTENTS TEST REPORT DECLARATION ........................................................................................................ 2 1. TEST RESULTS SUMMARY ................................................................................................... 5 2. GENERAL INFORMATION ...................................................................................................... 6 2.1. Report information .......................................................................................................... 6 2.2. Laboratory Accreditation and Relationship to Customer ......................................... 6 2.3. Measurement Uncertainty ............................................................................................. 7 3. PRODUCT DESCRIPTION ...................................................................................................... 8 3.1. EUT Description.............................................................................................................. 8 3.2. Block Diagram of EUT Configuration .......................................................................... 8 3.3. Operating Condition of EUT.......................................................................................... 8 3.4. Special Accessories ....................................................................................................... 9 3.5. Equipment Modifications ............................................................................................... 9 3.6. Support Equipment List ................................................................................................. 9 3.7. Test Conditions ............................................................................................................... 9 4. TEST EQUIPMENT USED ..................................................................................................... 10 5. CONDUCTED DISTURBANCE TEST .................................................................................. 11 5.1. Test Standard and Limit .............................................................................................. 11 5.2. Test Procedure ............................................................................................................. 11 5.3. Test Arrangement......................................................................................................... 11 5.4. Test Data ....................................................................................................................... 12 6. RADIATED DISTURBANCE TEST ....................................................................................... 14 6.1. Test Standard and Limit .............................................................................................. 14 6.2. Test Procedure ............................................................................................................. 14 6.3. Test Arrangement......................................................................................................... 14 6.4. Test Data ....................................................................................................................... 15 7. OCCUPIED BANDWIDTH ...................................................................................................... 22 7.1. Test Standard and Limit .............................................................................................. 22 7.2. Test Procedure ............................................................................................................. 22 7.3. Test Arrangement......................................................................................................... 22 Report No.: WT198000575 Page 3/26

7.4. Test Data ....................................................................................................................... 22 8. BAND EDGE ............................................................................................................................. 24 8.1. Test Standard and Limit .............................................................................................. 24 8.2. Band Edge FCC 15.249(d) Limit ................................................................................ 24 8.3. Test Procedure ............................................................................................................. 24 8.4. Test Arrangement......................................................................................................... 24 8.5. Test Data ....................................................................................................................... 24 9. ANTENNA REQUIREMENT ................................................................................................... 26 Report No.: WT198000575 Page 4/26

1. TEST RESULTS SUMMARY Table 1 Test Results Summary Test Items FCC Rules Test Results Conducted Disturbance 15.207 Pass Radiated disturbance 15.249 Pass Occupied Bandwidth 15.215 Pass Band Edges 15.249 Pass Antenna Requirement 15.203 Pass Remark: “N/A” means “Not applicable.” Report No.: WT198000575 Page 5/26

2. GENERAL INFORMATION 2.1. Report information 2.1.1.This report is not a certificate of quality; it only applies to the sample of the specific product/equipment given at the time of its testing. The results are not used to indicate or imply that they are application to the similar items. In addition, such results must not be used to indicate or imply that SMQ approves recommends or endorses the manufacture, supplier or use of such product/equipment, or that SMQ in any way guarantees the later performance of the product/equipment. 2.1.2.The sample/s mentioned in this report is/are supplied by Applicant, SMQ therefore assumes no responsibility for the accuracy of information on the brand name, model number, origin of manufacture or any information supplied. 2.1.3.Additional copies of the report are available to the Applicant at an additional fee. No third part can obtain a copy of this report through SMQ, unless the applicant has authorized SMQ in writing to do so. 2.2. Laboratory Accreditation and Relationship to Customer The testing report were performed by the Shenzhen Academy of Metrology and quality Inspection EMC Laboratory (Guangdong EMC compliance testing center), in their facilities located at No.4 TongFa Road, Xili Town, Nanshan District, Shenzhen, China. At the time of testing, Laboratory is accredited by the following organizations: China National Accreditation Service for Conformity Assessment (CNAS) accredits the Laboratory for conformance to FCC standards, EMC international standards and EN standards. The Registration Number is CNAS L0579. The Laboratory is listed in the United States of American Federal Communications Commission (FCC), and the registration number is 582918. The Laboratory is registered to perform emission tests with Industry Canada (IC), and the registration number is 11177A-1. Report No.: WT198000575 Page 6/26

2.3. Measurement Uncertainty Conducted Emission 9kHz~30MHz 3.5dB Radiated Emission 30MHz~1000MHz 4.5dB 1GHz~18GHz 4.6dB Report No.: WT198000575 Page 7/26

3. PRODUCT DESCRIPTION 3.1. EUT Description Description : Z-Wave Outdoor Module 2.0 120VAC Manufacturer : SHEENWAY ASIA LTD. Model Number : ZW4203 Rated Input : AC 120V/60Hz Power supply : AC 120V/60Hz Operate Frequency : 908.4MHz, 916MHz Modulation 908.4MHz: FSK, 916MHz: GFSK Antenna Designation : Integrated 3.2. Block Diagram of EUT Configuration AC Power 72w supply EUT incandescent lamp Test Setup 3.3. Operating Condition of EUT Mode 1: Transmitting at 908.4MHz Mode 2: Transmitting at 916MHz Report No.: WT198000575 Page 8/26

)l tuit&e£t8Wt#x Shenzhen Academy of Metrology & Quality Inspection 3.4.Special Accessories Not available for this EUT intended for grant. 3.5. Equipment Modifications Not available for this EUT intended for grant. 3.6. Support Equipment List Table 2 Support Equipment List Name Model No S/N Manufacturer 3.7. Test Conditions Date of test: Jan.31, 2019 — Feb.01, 2019 Date of EUT Receive: Jan.30, 2019 Temperature: (22—25) °C Relative Humidity: (42—46)% Report No.: WT198000575 Page 9/26

4. TEST EQUIPMENT USED Table 3 Test Equipment Cal. No. Equipment Manufacturer Model No. Last Cal. Interval SB3319 Test Receiver Rohde & Schwarz ESCS30 Nov.26, 2018 1 Year SB4357 AMN Rohde & Schwarz ENV216 Sep.04, 2018 1 Year SB8501/09 EMI Test Receiver Rohde & Schwarz ESU40 Mar.20, 2018 1 Year SB3955 Broadband antenna SCHWARZBECK VULB9163 Jun.12, 2018 1 Year SB8501/01 Horn Antenna Rohde & Schwarz HF907 Mar.08, 2018 1 Year SB8501/17 Preamplifier Rohde & Schwarz SCU-18 Mar.05, 2018 1 Year Report No.: WT198000575 Page 10/26

5. CONDUCTED DISTURBANCE TEST 5.1. Test Standard and Limit 5.1.1.Test Standard FCC Part 15 15.207 5.1.2.Test Limit Table 4 Conducted Disturbance Test Limit Maximum RF Line Voltage (dBV) Frequency Quasi-peak Level Average Level 150kHz~500kHz 66 ~ 56 * 56 ~ 46 * 500kHz~5MHz 56 46 5MHz~30MHz 60 50 *Decreasing linearly with logarithm of the frequency *The lower limit shall apply at the transition frequency. 5.2. Test Procedure The EUT is put on a table of non-conducting material that is 80cm high. The vertical conducting wall of shielding is located 40cm to the rear of the EUT. The power line of the EUT is connected to the AC mains through an Artificial Mains Network (A.M.N.). AN EMI test receiver is used to test the emissions from both sides of AC line. Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz using CISPR Quasi-Peak and average detector mode. The bandwidth of EMI test receiver is set at 9 kHz. 5.3. Test Arrangement The arrangement of the equipment is installed to meet the standards and operating in a manner, which tends to maximize its emission characteristics in a normal application. The detailed information refers to test picture. Report No.: WT198000575 Page 11/26

5.4. Test Data The emissions don’t show in below are too low against the limits. Refer to the test curves. Test mode 1: Transmitting at 908.4MHz (worst-case) Table 5 Conducted Disturbance Test Data Model No.: ZW4203 Test mode: 1 Line QP AV QP AV Frequency Factor Level Limit Level Limit Reading Reading MHz (dB) (dBuV) (dBuV) (dBuV) (dBuV) (dBuV) (dBuV) 0.150 39.3 66 23.3 56 29.6 13.6 9.7 0.230 37.3 62.4 26.3 52.4 27.6 16.6 9.7 0.362 35.0 58.7 28.5 48.7 25.3 18.8 9.7 0.666 31.3 56 28.9 46 21.5 19.1 9.8 1.366 30.6 56 27.8 46 20.8 18.0 9.8 2.270 29.5 56 26.6 46 19.6 16.7 9.9 Neutral QP AV QP AV Frequency Factor Level Limit Level Limit Reading Reading MHz (dB) (dBuV) (dBuV) (dBuV) (dBuV) (dBuV) (dBuV) 0.158 39.3 65.6 19.4 55.6 29.6 9.7 9.7 0.222 37.3 62.7 20.1 52.7 27.6 10.4 9.7 0.298 36.1 60.3 21.4 50.3 26.4 11.7 9.7 0.458 33.2 56.7 21.9 46.7 23.5 12.2 9.7 0.634 29.3 56 21.0 46 19.5 11.2 9.8 0.674 27.2 56 19.3 46 17.4 9.5 9.8 REMARKS: 1. Emission level(dBuV)=Read Value(dBuV) + Correction Factor(dB) 2. Correction Factor(dB) =LISN Factor (dB) + Cable Factor (dB)+Limiter Factor(dB) 3. The other emission levels were very low against the limit. Report No.: WT198000575 Page 12/26

Line Lev el [ dBuV] 80 70 60 50 40 30 20 10 0 - 10 150k 300k 500k 1M 2M 3M 5M 7M 10M 30M Fr equenc y [ Hz ] M ES ZW 4203- 908. 4M PK L M ES ZW 4203- 908. 4M AV L LI M FCC Q P M ain s LI M FCC AV M ain s Neutral Lev el [ dBuV] 80 70 60 50 40 30 20 10 0 - 10 150k 300k 500k 1M 2M 3M 5M 7M 10M 30M Fr equenc y [ Hz ] M ES ZW 4203- 908. 4M PK N M ES ZW 4203- 908. 4M AV N LI M FCC Q P M ain s LI M FCC AV M ain s Report No.: WT198000575 Page 13/26

)l mt€£lat0M72e Shenzhen Academy of Metrology & Quality Inspection 6. RADIATED DISTURBANCE TEST 6.1. Test Standard and Limit 6.1.1.Test Standard FCC Part 15 15.249 6.1.2.Test Limit Table 6 Radiated Disturbance Test Limit FREQUENCY FIELD FIELD MHz STRENGTHS STRENGTHS LIMITS LIMITS CuV/m) dB (uV/m) Fundamental 50000 94.0 Harmonics 500 54.0 30 ~ 88 100 40.0 88 ~ 216 150 43.5 216 ~ 960 200 46.0 960 ~ 500 54.0 * The lower limit shall apply at the transition frequency. * The test distance is 3m. 6.2. Test Procedure Radiated emission test below 1 GHz, test at SAC, the EUT is placed on a turntable, which is 0.8 meter above ground. The turntable can rotate 360 degrees to determine the position of the maximum emission level. EUT is set 3 meters away from the receiving antenna, which is mounted on an antenna tower. The antenna can move up and down to find out the maximum emission level. Radiated emission test above 1 GHz, test at FAR, the EUT is placed on a non—conductive table, which is 1.5 meter above ground. Broadband antenna is used as a receiving antenna at frequency range 30MHz to 1000MHz, Horn antenna is used as a receiving antenna at frequency range above 1GHz. Both horizontal and vertical polarization of the antenna is set on test, in order to find out the max emission, the relative positions of this EUT was rotated through three orthogonal axes. The RBW of the EMI test receiver is: 30~1000MHz 120KHz 1—18GHz 1MHz 6.3. Test Arrangement The arrangement of the equipment is installed to meet the standards and operating in a manner, which tends to maximize its emission characteristics in a normal application. The detailed information refers to test picture. The EUT shall be measured in the XYZ three positions, and the test data which was shown in the follow was the worst case. Report No.: WT198000575 Page 14/26

ltt£a2181IHt#Xbr Shenzhen Academy of Metrology & Quality Inspection 6.4. Test Data Table 7 Radiated Disturbance Test Data Model No.: ZW4203 Test mode: 1 Frequency oo Correction |Antenna Reading Emission Limits dB EUT (MH2) Polarization Factor Factor Value Level (xVim) axes Note (dB) (dB/m) (dB x V) dB (x V/m) 30.381 Horizontal 0.6 12.3 7.2 20.1 40.0 X QP 73.157 Horizontal 1.0 8.7 13.6 23.3 40.0 X QP 233.524 Horizontal 1.8 11.2 16.0 29.0 43.5 X QP 908 405 Horizontal 3.9 21.1 58.8 83.8 94 X Fundamental QP 2725.204 Horizontal —39.8 29.6 56.1 45.9 74 X Harmonics PK 2725.204 Horizontal —39.8 29.6 50 4 40.2 54 X Harmonies AV 8175.733 Horizontal —37.7 36.1 5§3.5 51.9 74 X Harmonics PK 8175.733 Horizontal —37.7 36.1 44.6 43.0 54 X Harmonies AV 34.746 Vertical 0.6 12.3 22.0 34.9 40.0 X QP 45.736 Vertical 0.8 13.6 13.2 27.6 40.0 X QP 72.867 Vertical 1.0 8.7 21.5 31.2 40.0 X QP 908.396 Vertical 3.9 21.1 58 4 834 94 X Fundamental QP 2725.261 Vertical —39.8 29.6 54.8 44.6 74 X Harmonics PK 2725.261 Vertical —39.8 29.6 47.1 36.9 54 X Harmonies AV 6358.874 Vertical —35.1 34.7 51.8 514 74 X Harmonics PK 6358.874 Vertical —35.1 34.7 42.1 41.7 54 X Harmonies AV 8175.574 Vertical —37.7 36.1 5§5.7 5§4.1 74 X Harmonics PK 8175.754 Vertical —37.7 36.1 475 45.9 54 X Harmonies AV 9992.999 Vertical —34 4 37.0 §1.2 53.8 74 X Harmonics PK 9992.999 Vertical —34 4 37.0 36.8 39 4 54 X Harmonies AV Report No.: WT198000575 Page 15/26

ltt£a2181IHt#Xbr Shenzhen Academy of Metrology & Quality Inspection Table 8 Radiated Disturbance Test Data Model No.: ZW4203 Test mode: 2 Frequency oo Correction |Antenna Reading Emission Limits dB EUT (MH2) Polarization Factor Factor Value Level (xVim) axes Note (dB) (dB/m) (dB x V) dB (x V/m) 72.636 Horizontal 1.0 8.7 14.0 23.7 40.0 QP 233.775 Horizontal 1.8 11.2 15.2 28 .2 43.5 QP 291.962 Horizontal 2.0 12.7 10.8 25.5 43.5 X QP 915.955 Horizontal 3.9 21.1 62.2 87 2 94 X Fundamental QP 2748.838 Horizontal —39.8 29.6 55.6 45 4 74 X Harmonics PK 2748.838 Horizontal —39.8 29.6 49.2 39.0 54 X Harmonies AV 8244.178 Horizontal —37.6 36.5 §3.1 §2.0 74 X Harmonics PK 8244.178 Horizontal —37.6 36.5 43.2 42.1 54 X Harmonies AV 30.721 Vertical 0.6 12.3 20.3 33.2 40.0 X QP 34.868 Vertical 0.6 12.3 214 34.3 40.0 X QP 72.285 Vertical 0.9 8.7 20.5 30.1 40.0 X QP 915.965 Vertical 3.9 21.1 61.6 86.6 94 X Fundamental QP 2748.285 Vertical —39.8 29.6 §2.9 42.7 74 X Harmonics PK 2748.285 Vertical —39.8 29.6 43.1 32.9 54 X Harmonies AV 6411.645 Vertical —34.5 34.8 51.0 51.3 74 X Harmonics PK 6411.645 Vertical —34.5 34.8 40.0 40.3 54 X Harmonies AV Note: 1. Emission level(dBuV/m)=Reading Value(dBuV) + Correction Factor(dB)+Antenna Factor (dB/m) 2. Correction Factor(dB) = Cable Factor (dB)+Amplifier Factor(dB) 3. No other spurious and harmonic emissions were reported greater than listed emissions above table. Report No.: WT198000575 Page 16/26

Table 9 Restricted Band Radiated Emission Data MHz MHz MHz GHz 0.090 - 0.110 16.42 - 16.423 399.9 - 410 4.5 - 5.15 0.495 - 0.505 16.69475 - 16.69525 608 - 614 5.35 - 5.46 2.1735 - 2.1905 16.80425 - 16.80475 960 - 1240 7.25 - 7.75 4.125 - 4.128 25.5 - 25.67 1300 - 1427 8.025 - 8.5 4.17725 - 4.17775 37.5 - 38.25 1435 - 1626.5 9.0 - 9.2 4.20725 - 4.20775 73 - 74.6 1645.5 - 1646.5 9.3 - 9.5 6.215 - 6.218 74.8 - 75.2 1660 - 1710 6.26775 - 6.26825 108 - 121.94 1718.8 - 1722.2 6.31175 - 6.31225 123 - 138 2200 - 2300 8.291 - 8.294 149.9 - 150.05 2310 - 2390 8.362 - 8.366 156.52475 - 156.52525 2483.5 - 2500 8.37625 - 8.38675 156.7 - 156.9 2655 - 2900 8.41425 - 8.41475 162.0125 - 167.17 3260 - 3267 12.29 - 12.293 167.72 - 173.2 3332 - 3339 12.51975 - 240 - 285 3345.8 - 3358 12.52025 322 - 335.4 3600 - 4400 12.57675 - 12.57725 13.36 - 13.41 All the emission levels of the above band were less than the limit 20dB. Report No.: WT198000575 Page 17/26

Test mode 1, below 1GHz, Vertical Lev el [ dBuV/ m ] 90 80 70 60 50 40 30 20 10 0 30M 50M 70M 100M 200M 300M 500M 700M 1G Fr equenc y [ Hz ] M ES ZW 4203 908. 4M Hz V LI M FCC 15. 249 FCC Cla s s B, f ie ld s t r engt h Test mode 1, below 1GHz, Horizontal Lev el [ dBuV/ m ] 90 80 70 60 50 40 30 20 10 0 30M 50M 70M 100M 200M 300M 500M 700M 1G Fr equenc y [ Hz ] M ES ZW 4203 908. 4M Hz H LI M FCC 15. 249 FCC Cla s s B, f ie ld s t r engt h Report No.: WT198000575 Page 18/26

Test mode 1, above 1GHz, Vertical Level in dBuV/m Test mode 1, above 1GHz, Horizontal Level in dBuV/m Report No.: WT198000575 Page 19/26

Test mode 2, below 1GHz, Vertical Lev el [ dBuV/ m ] 90 80 70 60 50 40 30 20 10 0 30M 50M 70M 100M 200M 300M 500M 700M 1G Fr equenc y [ Hz ] M ES ZW 4203 916M Hz V LI M FCC 15. 249 FCC Cla s s B, f ie ld s t r engt h Test mode 2, below 1GHz, Horizontal Lev el [ dBuV/ m ] 90 80 70 60 50 40 30 20 10 0 30M 50M 70M 100M 200M 300M 500M 700M 1G Fr equenc y [ Hz ] M ES ZW 4203 916M Hz H LI M FCC 15. 249 FCC Cla s s B, f ie ld s t r engt h Report No.: WT198000575 Page 20/26

Test mode 2, above 1GHz, Vertical Level in dBuV/m Test mode 2, above 1GHz, Horizontal Level in dBuV/m Report No.: WT198000575 Page 21/26

7. OCCUPIED BANDWIDTH 7.1. Test Standard and Limit 7.1.1.Test Standard FCC Part 15 15.215 7.2. Test Procedure 1. Set EUT as normal operation 2. Set EMI test receiver Center Frequency = fundamental frequency, RBW=1% to 5% of the OBW, VBW=3 times of RBW, Span=Wide enough to capture the complete power envelope. 3. Set EMI test receiver Max hold. Mark peak, -20dB. 7.3. Test Arrangement The arrangement of the equipment is installed to meet the standards and operating in a manner, which tends to maximize its emission characteristics in a normal application. The detailed information refers to test picture. 7.4. Test Data Transmitting at 908.4MHz: 20dB bandwidth =89.4 kHz Report No.: WT198000575 Page 22/26

Transmitting at 916MHz: 20dB bandwidth =143.5 kHz Report No.: WT198000575 Page 23/26

8. BAND EDGE 8.1. Test Standard and Limit 8.1.1.Test Standard FCC Part 15 15.249 8.2. Band Edge FCC 15.249(d) Limit Emission radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation 8.3. Test Procedure 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Position the EUT without connection to measurement instruments. Turn on the EUT and connect its antenna terminal to measurement instrument via a low loss cable. Then set it to any one measured frequency within its operating range and make sure the instrument is operated in its linear range. 3. Measure the highest amplitude appearing on spectral display and set it as reference level. Plot the graph with marking the highest point and edge frequency. 4. Repeat above procedures until all measured frequencies were complete. 8.4. Test Arrangement The arrangement of the equipment is installed to meet the standards and operating in a manner, which tends to maximize its emission characteristics in a normal application. The detailed information refers to test picture. 8.5. Test Data All the emission outside 902 to 928 is lower than 46 dB (μ V/m). The detailed information refers to test picture. Report No.: WT198000575 Page 24/26

Transmitting at 908.4MHz Lev el [ dBuV/ m ] 100 90 80 70 60 50 40 30 20 890M 900M 910M 920M 930M 940M Fr equenc y [ Hz ] M ES ZW 4203 B 908. 4M Hz H LI M FCC 15. 249( 902- 928) Transmitting at 916MHz Lev el [ dBuV/ m ] 100 90 80 70 60 50 40 30 20 890M 900M 910M 920M 930M 940M Fr equenc y [ Hz ] M ES ZW 4203 B 916M Hz H LI M FCC 15. 249( 902- 928) Report No.: WT198000575 Page 25/26

9. ANTENNA REQUIREMENT According to Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The EUT has a built in antenna which is integrated inside the enclosure, this is permanently attached antenna and meets the requirements of this section. Report No.: WT198000575 Page 26/26


Document Created: 2019-04-24 09:55:55
Document Modified: 2019-04-24 09:55:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC