RF Exposure Info

FCC ID: U2M-ENH500

RF Exposure Info

Download: PDF
FCCID_1602017

RF EXPOSURE REPORT REPORT NO.: SA111005C10 MODEL NO.: ENH500, ENH500EXT FCC ID: U2M-ENH500 RECEIVED: Oct. 5, 2011 TESTED: Oct. 14 ~ 18, 2011 ISSUED: Oct. 26, 2011 APPLICANT: Senao Networks, Inc. ADDRESS: 3F, No. 529, Chung Cheng Rd., Hsintien, Taipei, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist.,New Taipei City, Taiwan ( R.O.C. ) This test report consists of 6 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA111005C10 1 Report Format Version 4.0.0

TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION.............................................................................................. 4 2. RF EXPOSURE LIMIT ..................................................................................... 5 3. MPE CALCULATION FORMULA ..................................................................... 5 4. CLASSIFICATION............................................................................................ 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER................... 6 Report No.: SA111005C10 2 Report Format Version 4.0.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA111005C10 Original release Oct. 26, 2011 Report No.: SA111005C10 3 Report Format Version 4.0.0

1. CERTIFICATION PRODUCT: Wireless 802.11an Access Point BRAND NAME: EnGenius MODEL NO.: ENH500, ENH500EXT APPLICANT: Senao Networks, Inc. TEST SAMPLE: ENGINEERING SAMPLE TESTED: Oct. 14 ~ 18, 2011 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model no.: ENH500) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: ( Celia Chen / Senior Specialist ) APPROVED BY : , DATE: ( Ken Liu / Manager ) Report No.: SA111005C10 4 Report Format Version 4.0.0

2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY AVERAGE TIME RANGE (MHz) STRENGTH (V/m) STRENGTH (A/m) (mW/cm2) (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA111005C10 5 Report Format Version 4.0.0

5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (dBm) (cm) (mW/cm2) (MHz) (dBi) (mW/cm2) 5180-5240 9.98 13 20 0.0395 1.00 5745-5825 22.9 13 20 0.7740 1.00 --- END --- Report No.: SA111005C10 6 Report Format Version 4.0.0


Document Created: 2011-11-24 09:15:49
Document Modified: 2011-11-24 09:15:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC