Test report

FCC ID: TXT-DTECT150A

Test Report

Download: PDF
FCCID_1474375

EUROFINS PRODUCT SERVICE GMBH Testing Cert #1983.01 TEST- REPORT Compliance Test Report FCC PART 15 SUBPART F, 15.509 Wallscanner D-tect 150 3 601 K10 013 TEST REPORT NUMBER: G0M20910-2631-C-1 Eurofins Product Service GmbH Storkower Str. 38c, 15526 Reichenwalde, Phone +49-33631-888 0 Germany Fax +49-33631-888 660

TABLE OF CONTENTS 1 General Information 3 1.1 Notes 3 1.2 Testing laboratory 4 1.3 Details of approval holder 5 1.4 Application details 5 1.5 Test item 5 1.6 Test standards 6 1.7 Acronyms and Abbreviations 6 2 Technical test 7 2.1 Summary of test results 7 2.2 Test environment 7 2.3 Test equipment utilized 8 2.4 Test results 9 3 Transmitter parameters 10 3.1 10dB Bandwidth 10 3.2 Cease of operation time 11 3.3 Peak emission level 12 3.4 Transmitter spurious emissions 14 Annex A Photos 19 Annex B 10dB Bandwidth 24 Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 2 of 25

«= eurofins| 1 General Information 11 Notes The purpose of conformity testing is to increase the probability of adherence to the essential require— ments or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is im— practical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has passed all the relevant tests con— forms to a specification. Neither is there any guarantee that such a test sample will interwork with other genuinely open sys— tems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of com— munications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the Eu— rofins Product Service GmbH. Operator: 26.10.2009 T. Jahn C.(/’DQ,Q&(‘ Date Eurofins—Lab. Name Signature Technical responsibility for area of testing: 26.10.2009 J. Zimmermann ( & m Date Eurofins Name %éare Test Report No.: GOM20910—2631—C—1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D—15526 REICHENWALDE B. BERLIN vuge — ~cc>

1.2 Testing laboratory EUROFINS PRODUCT SERVICE GMBH Storkower Strasse 38c D-15526 Reichenwalde b. Berlin Germany Telefon : +49 33631 888 00 Telefax : +49 33631 888 660 DAR ACCREDITED TESTING LABORATORY DAR-REGISTRATION NUMBER: DAT-P-268/08 RECOGNIZED NOTIFIED BODY EMC REGISTRATION NUMBER: BNetzA-bS EMV-07/61 RECOGNIZED NOTIFIED BODY R&TTE REGISTRATION NUMBER: BNetzA-bS-02/51-53 FCC FILED TEST LABORATORY REG.-NO. 96970 A2LA ACCREDITED TESTING LABORATORY CERTIFICATE NO. 1983.01 BLUETOOTH QUALIFICATION TEST FACILITY (BQTF) ACCREDITED BY BLUETOOTH QUALIFICATION REVIEW BOARD INDUSTRY CANADA FILED TEST LABORATORY REG. NO. IC 3470 Test location, where different: Name : ./. Street : ./. Town : ./. Country : ./. Telephone : ./. Fax : ./. Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 4 of 25

1.3 Details of approval holder Name : Robert Bosch GmbH Street : Postfach 10 01 56 Town : D-70745 Leinfelden-Echterdingen Country : Germany Telephone : +49 711758-2909 Fax : +49 711 811-518 309 Contact : Herr Heiko Braun Telephone : +49 711758-2909 1.4 Application details Date of receipt of application : 15.10.2009 Date of receipt of test item : 15.10.2009 Date of test : 21.10.2009 1.5 Test item Description of test item : Wallscanner D-tect 150 Type identification : 3 601 K10 013 HW-Version : Japan-Mask Brand Name : Bosch Technical data Frequency range : 1 - 6GHz Antenna : integrated Power supply : 6.0VDC (Battery 4xAA) Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 5 of 25

Manufacturer: (if applicable) Name : Robert Bosch GmbH Street : Postfach 10 01 56 Town : D-70745 Leinfelden-Echterdingen Country : Germany 1.6 Test standards Technical standard : FCC PART 15 SUBPART F § 15.509 FCC PART 15 SUBPART C § 15.209 1.7 Acronyms and Abbreviations EUT : Equipment under Test UWB : Ultra Wideband TX : Transmission RX : Reception EIRP : Equivalent isotropic radiated power Tnom : Nominal Temperature Tmin : Minimum Temperature Tmax : Maximum Temperature Vnom : Nominal Supply Voltage Vmin : Minimum Supply Voltage Vmax : Maximum Supply Voltage Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 6 of 25

2 Technical test 2.1 Summary of test results No deviations from the technical specification(s) were ascertained in the course : of the tests performed. or The deviations as specified in 2.4 were ascertained in the course of the tests performed. 2.2 Test environment Temperature : 22 ... 26°C Relative humidity content : 20 ... 75% Air pressure : 86 ... 103kPa Extreme conditions parameters: Vnom : 6VDC Tnom : 25°C Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 7 of 25

2.3 Test equipment utilized Measurement Equipment List No. Measurement device: Type: Manufacturer: ETS 0019 Horn Antenna BBHA 9120D Schwarzbeck ETS 0030 Biconical Antenna HK 116 Rohde & Schwarz ETS 0336 LPD Antenna HL 223 Rohde & Schwarz ETS 0481 Horn Antenna 22240-25 Flann Microwave ETS 0496 Spectrum Analyzer FSP 30 Rohde & Schwarz ETS 0476 Measurement Receiver ESCS 30 Rohde & Schwarz Amplifier Matrix Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 8 of 25

2.4 Test results 1st test test after modification production test Test case Subclause Required Test passed Test failed TRANSMITTER PARAMETERS FCC § 15.503 10dB Bandwidth FCC § 15.509 Cease of operation time FCC § 15.509 Peak emission level FCC § 15.509 FCC § 15.209 Radiated spurious emissions FCC § 15.509 Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 9 of 25

3 Transmitter parameters 3.1 10dB Bandwidth The UWB emission bandwidth occupied by the transmitted signal is reported as the frequency band bounded by the points that are 10dB below the highest radiated emission. 3.1.1 Limits The intentional radition transmitted by any UWB transmitter must have, at any point in time, a frac- tional bandwidth equal to or greater than 0.20 or a UWB bandwidth equal to or greater than 500MHz regardless of the fractional bandwidth. Ground penetrating radars or wall imaging systems provided after FCC § 15.509 must have a UWB bandwidth below 10.6GHz. 3.1.2 Measurement procedure EUT Spectrum Analyzer Shielded chamber The EUT is placed in a shielded chamber and set to transmission mode under normal test conditions. A measurement antenna is connected to a spectrum analyzer. The span of the analyzer is set wide enough to capture all significant emissions of the intended transmitted spectrum. The maximum emis- sion frequency is identified and the two edge frequencies with a power level 10dB lower than the power level of the maximum emission frequency are identified and recorded. 3.1.3 Results Transmitter 10dB bandwidth Measurement Conditions Bandedge criteria : -10dBc Maximum emission frequency [MHz] Bandwidth [MHz] 2157.1 2157.1 See attached diagram in Annex Verdict PASS Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 10 of 25

3.2 Cease of operation time The device, if designed for manual operation, shall be equiped with a switch that causes the transmit- ter to cease operation within 10s. 3.2.1 Limits The transmitter shall cease operation after 10s. 3.2.2 Measurement procedure EUT Spectrum Analyzer Shielded chamber The EUT is placed in a shielded chamber and set to transmission mode under normal test conditions. A measurement antenna is connected to a spectrum analyzer. The EUT is switched of and the time until the transmitter ceases it’s operation is recorded. 3.2.3 Results Cease of operation time Time for cease of operation [s] < 10s Verdict PASS Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 11 of 25

3.3 Peak emission level If the frequency of the highest emission frequency of the UWB transmitter is above 960MHz a limit on the peak level of the emission within a 50MHz bandwidth is defined. 3.3.1 Limits The peak emission level within a 50MHz bandwidth centered on the highest emission frequency fM has to be lower or equal than 0dBm EIRP. If a different resolution bandwidth is used the limit can be adjusted according the following equation (15.521) : ⎛ RWB[MHz] ⎞ L[dBm] = 20 log10 ⎜ ⎟ ⎝ 50 ⎠ 3.3.2 Measurement procedure Open field test site Measurement Antenna EUT Ground plane Sand pit Measurement Receiver According to FCC 02-48 the EUT is placed on a sand pit and actived in transmission mode. The measurement antenna is pointed directly to the EUT. The radiated emissions are measured in the frequency range of the intentional radiation using peak dectector and resolution bandwidth of 1MHz. In order to maximize the emission the EUT is measured at 8 positions (every 45°). The measurement is performed for horizontal and vertical polarization of the measurement antenna. Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 12 of 25

3.3.3 Results Peak emission level Measurement Conditions Resolution bandwidth: 3MHz Measurement Distance: 1.5m Emission Limit: -24.4dBm Detector: Peak Cable Pre-Amp. Net Field Frequency Reading AF Limit Delta Pol. Loss Gain Strength [MHz] [dBμV] [dB/m] [dBμV/m] [dB] [dB] [dB] [dBμV/m] 2200.4 V 60 26 1.3 44.5 42.8 76.8 -34.0 2200.4 H 59 26 1.3 44.5 41.8 76.8 -35.0 Verdict PASS Note : The field strength limits are calculated by E[dBμV/m] = P[dBm]+95.2 for a measurement dis- tance of 3m according 15.521 or E[dBμV/m] = P[dBm] – 20 log(D[m])+104.8 for measurement dis- tance D according NTIA 01-43 sec. 2.2.1.. Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 13 of 25

3.4 Transmitter spurious emissions The radiated emission from the device have to complie with the emission limits stated in paragraph 15.209 and 15.509 of the FCC rules. 3.4.1 Limits Below 960MHz the radiated emissions have to comply with the limits stated in 15.209. Paragraph 15.209 defines the following emission limits in the frequency range from 9kHz to 960MHz when meas- ured with quasi-peak detector. Tranmitter spurious emission limits below 960MHz Calculated Frequency range Limit 3m Limit Tx-state Limit 3m [MHz] [µV/m] Distance [m] [dBµV/m] 0.009 – 0.490 2400/F[kHz] 48.5 – 13.8 300 0.490 – 1.705 2400/F[kHz] 33.8 - 23 30 1.705 – 30.0 30 29.5 30 Operational 30 – 88 100 40.0 3 88 – 216 150 43.5 3 216 – 960 200 46.0 3 > 960 500 54.0 3 The radiated emission limits above 960MHz are stated in 15.509. The measurements are performed with an RMS detector and a resolution bandwidth of 1MHz and the following limits shall not be ex- ceeded. Tranmitter spurious emission limits above 960MHz, RBW 1MHz Frequency range Limit Limit Limit Tx-state [MHz] [dBm EIRP] [dBµV/m] Distance [m] 960 – 1610 -65.3 29.9 3 1610 – 1990 -53.3 41.9 3 Operational 1990 – 3100 -51.3 43.9 3 3100 – 10600 -41.3 53.9 3 > 10600 -51.3 43.9 3 Note : The field strength limits are calculated by E[dBμV/m] = P[dBm]+95.2 for a measurement dis- tance of 3m according 15.521 or E[dBμV/m] = P[dBm] – 20 log(D[m])+104.8 for measurement dis- tance D according NTIA 01-43 sec. 2.2.1.. Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 14 of 25

In addition the radiated emission limits have to comply with the following limits for a resolution band- width of 1kHz and RMS detector. Tranmitter spurious emission limits above 960MHz, RBW 1kHz Frequency range Limit Limit Limit Tx-state [MHz] [dBm EIRP] [dBµV/m] Distance [m] 1164 – 1240 -75.3 19.9 3 Operational 1559 – 1610 -75.3 19.9 3 Note : The field strength limits are calculated by E[μV/m] = P[dBm]+95.2 for a measurement distance of 3m according 15.521 or E[μV/m] = P[dBm] – 20 log(D[m])+104.8 for measurement distance D ac- cording NTIA 01-43 sec. 2.2.1.. 3.4.2 Measurement procedure Open field test site Measurement Antenna EUT Ground plane Sand pit Measurement Receiver According to FCC 02-48 the EUT is placed on a sand pit and actived in transmission mode. The measurement antenna is pointed directly to the EUT. The frequency range from 30MHz to 960MHz is measured using peak/quasi-peak dectector and resolution bandwidths from 1 to 100kHz. Above 960MHz a RMS detector and a resolution bandwidth of 1MHz is used. In addition the frequency range 1164-1240MHz and 1559-1610MHz is measured with a resolution bandwidth of 1kHz. In order to maximize the emission the EUT is measured at 8 positions (every 45°). The measurement is per- formed for horizontal and vertical polarization of the measurement antenna over the frequency range from 30MHz to 40GHz. Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 15 of 25

3.4.3 Results Transmitter spurious emissions < 960MHz Measurement Conditions Resolution bandwidth: 120kHz Measurement Distance: 3m Detector: Quasi-Peak Cable Pre-Amp. Net Field Frequency Reading AF Limit Delta Pol. Loss Gain Strength [MHz] [dBμV] [dB/m] [dBμV/m] [dB] [dB] [dB] [dBμV/m] 188 V 11 13.5 0.2 0 24.7 43.5 -18.8 188 H 11 13.5 0.2 0 24.7 43.5 -18.8 200 V 19 9.8 0.2 0 29.0 43.5 -14.5 200 H 16 9.8 0.2 0 26.0 43.5 -17.5 263 V 23 11.4 0.2 0 34.6 46.0 -11.4 263 H 21 11.4 0.2 0 32.6 46.0 -13.4 336 V 11 13.4 0.3 0 24.7 46.0 -21.3 336 H 14 13.4 0.3 0 27.7 46.0 -18.3 362 V 16 14.4 0.3 0 30.7 46.0 -15.3 362 H 16 14.4 0.3 0 30.7 46.0 -15.3 388 V 17 16.9 0.3 0 34.2 46.0 -11.8 388 H 19 16.9 0.4 0 36.2 46.0 -9.8 400 V 21 15.6 0.4 0 37.0 46.0 -9.0 400 H 26 15.6 0.4 0 42 46.0 -4.0 500 V 12 15.6 0.4 0 29.8 46.0 -16.2 500 H 4 17.4 0.4 0 22.8 46.0 -23.2 708 V 13 17.4 0.4 0 34.6 46.0 -11.4 708 H 4 21.0 0.6 0 25.6 46.0 -20.4 750 V 11 20.8 0.6 0 32.4 46.0 -13.6 750 H 6 20.8 0.6 0 27.4 46.0 -18.6 756 V 13 20.8 0.6 0 34.4 46.0 -11.6 756 H 5 20.8 0.6 0 26.4 46.0 -19.6 Verdict PASS Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 16 of 25

Transmitter spurious emissions > 960MHz Measurement Conditions Resolution bandwidth: 1MHz Measurement Distance: 1.5m Limit Correction: 6.0dB Detector: RMS Cable Pre-Amp. Net Field Frequency Reading AF Limit Delta Pol. Loss Gain Strength [MHz] [dBμV] [dB/m] [dBμV/m] [dB] [dB] [dB] [dBμV/m] 1500 V 56 25.4 1.0 44.5 37.9 35.9 2.0 1500 H 57 25.4 1.0 44.5 38.9 35.9 3.0 1700 V 57 24.5 1.1 44.5 38.1 47.9 -9.8 1700 H 59 24.5 1.1 44.5 40.1 47.9 -7.8 2100 V 58 25.6 1.2 43.3 41.5 49.9 -8.4 2100 H 57 25.6 1.2 43.3 40.5 49.9 -9.4 2300 V 54 26.0 1.3 43.3 38.0 49.9 -11.9 2300 H 55 26.0 1.3 43.3 39.0 49.9 -10.9 2800 V 58 28.0 1.4 42.0 45.4 49.9 -4.5 2800 H 56 28.0 1.4 42.0 43.4 49.9 -6.5 2946 V 50 28.1 1.5 42.2 37.4 49.9 -12.5 2946 H 49 28.1 1.5 42.2 36.4 49.9 -13.5 Verdict PASS Note : The field strength limits are calculated by E[μV/m] = P[dBm]+95.2 for a measurement distance of 3m according 15.521 or E[μV/m] = P[dBm] – 20 log(D[m])+104.8 for measurement distance D ac- cording NTIA 01-43 sec. 2.2.1.. The highlighted emissions are caused by digital circuitry, therfore acc. 15.521 the emission limit of paragraph 15.209 of 60dBμV/m applies. Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 17 of 25

Transmitter spurious emissions 1164-1240MHz & 1559-1610MHz Measurement Conditions Resolution bandwidth: 1kHz Measurement Distance: 1.5m Limit Correction: 6.0dB Detector: RMS Cable Pre-Amp. Net Field Frequency Reading AF Limit Delta Pol. Loss Gain Strength [MHz] [dBμV] [dB/m] [dBμV/m] [dB] [dB] [dB] [dBμV/m] 1168 V 32 24.2 0.8 44.1 12.9 25.9 -13.0 1168 H 34 24.2 0.8 44.1 14.9 25.9 -11.0 1188 V 38 24.2 0.8 44.1 18.9 25.9 -7.0 1188 H 37 24.2 0.8 44.1 17.9 25.9 -8.0 1192 V 34 24.9 0.9 44.1 15.7 25.9 -10.2 1192 H 35 24.9 0.9 44.1 16.7 25.9 -9.2 1200 V 41 24.9 0.9 44.1 22.7 25.9 -3.2 1200 H 43 24.9 0.9 44.1 24.7 25.9 -1.2 1208 V 28 24.9 0.9 44.1 9.7 25.9 -16.2 1208 H 31 24.9 0.9 44.1 12.7 25.9 -13.2 1216 V 30 24.9 0.9 44.1 11.7 25.9 -14.2 1216 H 30 24.9 0.9 44.1 11.7 25.9 -14.2 1224 V 33 24.9 0.9 44.1 14.7 25.9 -11.2 1224 H 35 24.9 0.9 44.1 16.7 25.9 -9.2 1232 V 34 24.9 0.9 44.1 15.7 25.9 -10.2 1232 H 32 24.9 0.9 44.1 13.7 25.9 -12.2 1236 V 38 24.9 0.9 44.1 19.7 25.9 -6.2 1236 H 37 24.9 0.9 44.1 18.7 25.9 -7.2 1560 V 38 25.4 1.1 44.5 20.0 25.9 -5.9 1560 H 33 25.4 1.1 44.5 15.0 25.9 -10.9 1568 V 30 25.4 1.1 44.5 12.0 25.9 -13.9 1568 H 29 25.4 1.1 44.5 11.0 25.9 -14.9 1576 V 33 24.8 1.1 44.5 14.4 25.9 -11.5 1576 H 30 24.8 1.1 44.5 11.4 25.9 -14.5 1584 V 42 24.8 1.1 44.5 23.4 25.9 -2.5 1584 H 37 24.8 1.1 44.5 18.4 25.9 -7.5 1587 V 22 24.8 1.1 44.5 3.4 25.9 -22.5 1587 H 18 24.8 1.1 44.5 -0.6 25.9 -26.5 1592 V 30 24.8 1.1 44.5 11.4 25.9 -14.5 1592 H 29 24.8 1.1 44.5 10.4 25.9 -15.5 1600 V 41 24.8 1.1 44.5 22.4 25.9 -3.5 1600 H 39 24.8 1.1 44.5 20.4 25.9 -5.5 1608 V 41 24.8 1.1 44.5 22.4 25.9 -3.5 1608 H 37 24.8 1.1 44.5 18.4 25.9 -7.5 Verdict PASS Note : The field strength limits are calculated by E[μV/m] = P[dBm]+95.2 for a measurement distance of 3m according 15.521 or E[μV/m] = P[dBm] – 20 log(D[m])+104.8 for measurement distance D ac- cording NTIA 01-43 sec. 2.2.1.. Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 18 of 25

Annex A Photos Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 19 of 25

Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 20 of 25

Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 21 of 25

Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 22 of 25

Test Setup Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 23 of 25

Annex B 10dB Bandwidth Test Report No.: G0M20910-2631-C-1 EUROFINS PRODUCT SERVICE GMBH STORKOWER STR. 38C, D-15526 REICHENWALDE B. BERLIN Page 24 of 25

FCC part 15.503 -10 dB Bandwidth EUT Wall penetrating radar Model Wallscanner D-tect 150 3 601 K10 013 Approval Holder Robert Bosch GmbH Temperature / Voltage 23°C / Unom Test Site / Operator Eurofins Test Specification FCC part 15 section 503 Comment Marker 1 2157.114 MHz Measurement diagram Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 25 of 25


Document Created: 2009-10-27 08:49:15
Document Modified: 2009-10-27 08:49:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC