Users Manual 2

FCC ID: TVUA495

Users Manual

Download: PDF
FCCID_1226517






| A4I0/A435 / NAM / A3 1006—MzZZzU0—R501—1—3512 / main.tm / 22.10,.2009 Power Outage: 9. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric In the event of a power outage, your cordless shock. telephone will not operate. The cordless tele— 10. Never push objects of any kind into this prod— phone requires electricity for operation. You uct through cabinet slots as they may touch dan— should have a telephone that does not require gerous voltage points or short out parts that electricity available for use during power outages. could result in the risk offire or electric shock. Notice: Never spill liquid of any kind on this product. 11. To reduce the risk of electric shock or burns, do The installation of the base unit should allow not disassemble this product. Takeit to a qualified at least 8 inches between the base and persons to service center when service is required. Opening be in compliance with FCC RF exposure guide— or removing covers may expose you to dangerous lines. voltages, dangerous electrical current or other risks. Incorrect reassembly can cause electric For body worn operation, the portable part shock when the appliance is subsequently used. (handset) has been tested and meets FCC RF 12. Unplug the product from the wall outlet and exposure guidelines. Use with an accessory that refer servicing to qualified service personnel contains metal parts may not ensure compliance under the following conditions: with FCC RF exposure guidelines. a.) When the power cord is damaged orfrayed. b.) If liquid has been spilled into the product. Notice to telephone company service: c.) If the product has been exposed to rain or If you need service from your telephone company, water. please provide them with the information d.) If the product does not operate normally by Facility interface Code (FIC) following the operating instructions. Adjust only Service Order Code (SOC) those controls that are covered by the operating Universal Service Order Code (USOC) instructions because improper adjustment of as indicated on the label on the bottom side of the other controls may result in damage and may base station. require extensive work by a qualified technician to restore the product to normal operation. Safety precautions e.) If the product has been dropped or physically has been damaged. Before using your telephone equipment, basic £.) If the product exhibits a distinct change in per— safety instructions should always be followed to formance. reduce the risk offire, electric shock and injury to 13. Avoid using a telephone (other than a cordless persons. type) during a thunderstorm. There may be a 1. Read and understand all instructions. remote risk of electrical shock from lightning. 2. Follow all warnings and instructions marked on Therefore we suggest a surge arrestor. the product. 14. Do not use the telephone to report a gas leak 3. Unplug this product from the wall telephone in the vicinity of the leak, jack and power outlet before cleaning. Do not use 15. Emergency/911 numbers may not be dialed if liquid cleaners or aerosol cleaners. Use damp the keypad is locked. cloth for cleaning. 16. Minimum No. 26 AWG telecommunication line 4. Do not use this product near water, for example, cord must be used with this phone. near a bathtub, wash bow!, kitchen sink, or laun— dry }ub, in a wet basement or near a swimming pool. 5. Place this product securely on a stable surface. Serious damage and/orinjury may result if the unit falls. 6. Slots or openings in the cabinet and the back and bottom are provided for ventilation, to pro— tect it from overheating. These openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register, or in a place where proper ventilation is not pro— vided. 7. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of AC line power to your home, consult your dealer or local power company. 8. Do not place objects on the power cord. Install the unit where no one can step or trip on the cord.









Document Created: 2010-01-03 15:11:12
Document Modified: 2010-01-03 15:11:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC