MPE

FCC ID: TVU-DX800A

RF Exposure Info

Download: PDF
FCCID_1552332

Test report no.: 1-3175-01-05/11-FP Annex F: Safety exposure levels Prediction of MPE limit at a given distance: Equation from page 18 of OET Bulletin 65, Edition 97-01 2 S = PG / 4π R where: S = Power density P = Power input to the antenna G = Antenna gain R = Distance to the center of radiation of the antenna The table below is excerpted from Table 1B of 47 CFR 1.1310 titled “Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure” 2 Frequency Range (MHz) Power Density (mW/cm ) Averaging Time (minutes) 300 -1500 f/1500 30 1500 - 100000 1.0 30 where f = Frequency (MHz) Prediction: P Max power input to the antenna: 20.15 dBm P Max power input to the antenna: 103.5 mW R Distance: 20 cm G Maximum antenna gain: 3.00 dBi G Maximum antenna gain: 2.0 numeric 2 S MPE limit for uncontrolled exposure: 1 mW/cm 2 Calculated Power density: 0.0412 mW/cm 2 0.412 W/m This prediction demonstrates the following: The power density levels at a distance of 20 cm are below the maximum levels allowed by FCC regulations 2011-08-26 Page 60 of 60


Document Created: 2011-09-30 10:46:20
Document Modified: 2011-09-30 10:46:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC