RF Exposure Info (MPE)

FCC ID: TVE-37176T0464

RF Exposure Info

Download: PDF
FCCID_4446909

RF Exposure Report Report No.: SA190624C08 FCC ID: TVE-37176T0464 Test Model: FAP-231E Series Model: FortiAP 231Exxxxxx, FAP-231E xxxxxx, FORTIAP-231E xxxxxx (where “x” can be used as “A-Z”, or “-0-9”, or “-“, or blank for software changes or marketing purposes only) Received Date: Jun. 24, 2019 Test Date: Jul. 02 ~ Aug. 03, 2019 Issued Date: Aug. 08, 2019 Applicant: Fortinet lnc. Address: 899 Kifer Road Sunnyvale, CA 94086 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA190624C08 Page No. 1 / 6 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power........................................................................... 6 Report No.: SA190624C08 Page No. 2 / 6 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued SA190624C08 Original release. Aug. 08, 2019 Report No.: SA190624C08 Page No. 3 / 6 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Wireless Access Point Brand: Fortinet Test Model: FAP-231E Series Model: FortiAP 231Exxxxxx, FAP-231E xxxxxx, FORTIAP-231E xxxxxx (where “x” can be used as “A-Z”, or “-0-9”, or “-“, or blank for software changes or marketing purposes only) Sample Status: Engineering sample Applicant: Fortinet lnc. Test Date: Jul. 02 ~ Aug. 03, 2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3 -2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Aug. 08, 2019 Polly Chien / Specialist Approved by : , Date: Aug. 08, 2019 Bruce Chen / Senior Project Engineer Report No.: SA190624C08 Page No. 4 / 6 Report Format Version: 6.1.1

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 26cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA190624C08 Page No. 5 / 6 Report Format Version: 6.1.1

3 Calculation Result of Maximum Conducted Power Power Frequency Max Power Antenna Distance Limit Radio Mode Density Band (MHz) (dBm) Gain (dBi) (cm) (mW/cm2) (mW/cm2) WLAN CDD 24.61 7.71 26 0.201 1 1 2412~2462 Beamforming 21.60 7.71 26 0.100 1 WLAN CDD 24.15 8.61 26 0.222 1 3 2412~2462 Beamforming 21.07 8.61 26 0.109 1 WLAN CDD 27.02 8.51 26 0.421 1 1 5745~5825 Beamforming 24.01 8.51 26 0.210 1 WLAN CDD 26.14 8.51 26 0.343 1 2 5180~5240 Beamforming 23.13 8.51 26 0.172 1 WLAN CDD 26.58 8.51 26 0.380 1 2 5745~5825 Beamforming 23.57 8.51 26 0.190 1 BT LE 4.0 - - 2.29 5.10 26 0.001 1 2402~2480 BT LE 5.0 - - 5.92 5.10 26 0.001 1 2402~2480 Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Radio 1: 2412~2462MHz Max. Directional Gain = 4.70dBi + 10log(2) = 7.71dBi Radio 3: 2412~2462MHz Max. Directional Gain = 5.60dBi + 10log(2) = 8.61dBi Radio 1: 5745~5825MHz Max. Directional Gain = 5.50dBi + 10log(2) = 8.51dBi Radio 2: 5180~5240MHz Max. Directional Gain = 5.50dBi + 10log(2) = 8.51dBi Radio 2: 5745~5825MHz Max. Directional Gain = 5.50dBi + 10log(2) = 8.51dBi Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. Radio 1 (2.4GHz) + Radio 2 (5GHz) + BLE = 0.201 / 1 + 0.380 / 1 + 0.001 / 1 = 0.582 < 1 2. Radio 1 (5GHz Band 4) + Radio 2 (5GHz Band 1) + Radio 3 (2.4GHz) + BLE = 0.421 / 1 + 0.343 / 1 + 0.222 / 1 + 0.001 / 1 = 0.987 < 1 3. Radio 1 (5GHz Band 4) + Radio 2 (5GHz Band 1) + BLE = 0.421 / 1 + 0.343 / 1 + 0.001 / 1 = 0.765 < 1 ---END--- Report No.: SA190624C08 Page No. 6 / 6 Report Format Version: 6.1.1


Document Created: 2019-09-19 21:00:17
Document Modified: 2019-09-19 21:00:17
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC