RF Exposure Info (MPE)_rev.pdf

FCC ID: TVE-241BC041

RF Exposure Info

Download: PDF
FCCID_4085510

RF Exposure Report Report No.: SA161026C20D FCC ID: TVE-241BC041 Test Model: FortiAP U221EV, FortiAP U223EV Series Model: FortiAP U221EVxxxxxx, FAP-U221EVxxxxxx, FORTIAP-U221EVxxxxxx, FortiAP U223EVxxxxxx, FAP-U223EVxxxxxx, FORTIAP-U223EVxxxxxx (where “x” can be used as “A-Z” or “0-9” or “-“ or blank for software changes or marketing purposes only) Received Date: Mar. 28, 2018 Test Date: Mar. 28 ~ Jun. 01, 2018 Issued Date: Jun. 04, 2018 Applicant: Fortinet lnc. Address: 899 Kifer Road Sunnyvale, CA 94086 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA161026C20D Page No. 1 / 7 Report Format Version: 6.1.1 Reference No.: 180511C01

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power........................................................................... 6 Report No.: SA161026C20D Page No. 2 / 7 Report Format Version: 6.1.1 Reference No.: 180511C01

Release Control Record Issue No. Description Date Issued SA161026C20D Original release Jun. 04, 2018 Report No.: SA161026C20D Page No. 3 / 7 Report Format Version: 6.1.1 Reference No.: 180511C01

1 Certificate of Conformity Product: Secured Wireless Access Point Brand: Fortinet lnc. Test Model: FortiAP U221EV, FortiAP U223EV Series Model: FortiAP U221EVxxxxxx, FAP-U221EVxxxxxx, FORTIAP-U221EVxxxxxx, FortiAP U223EVxxxxxx, FAP-U223EVxxxxxx, FORTIAP-U223EVxxxxxx (where “x” can be used as “A-Z” or “0-9” or “-“ or blank for software changes or marketing purposes only) Sample Status: Engineering sample Applicant: Fortinet lnc. Test Date: Mar. 28 ~ Jun. 01, 2018 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jun. 04, 2018 Pettie Chen / Senior Specialist Approved by : , Date: Jun. 04, 2018 Bruce Chen / Project Engineer Report No.: SA161026C20D Page No. 4 / 7 Report Format Version: 6.1.1 Reference No.: 180511C01

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 2 1.34-30 824/f 2.19/f (180/f )* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA161026C20D Page No. 5 / 7 Report Format Version: 6.1.1 Reference No.: 180511C01

3 Calculation Result of Maximum Conducted Power Frequency Band Max Power Antenna Gain Distance Power Density Limit (MHz) (dBm) (dBi) (cm) (mW/cm2) (mW/cm2) WLAN Internal antenna CDD mode 2412-2462 22.49 7.96 20 0.221 1 5180-5240 21.71 8.84 20 0.226 1 5250-5350 21.03 8.84 20 0.193 1 5470-5725 21.08 8.84 20 0.195 1 5745-5825 21.64 8.84 20 0.222 1 Beamforming mode 2412-2462 18.64 7.96 20 0.091 1 5180-5240 18.71 8.84 20 0.113 1 5250-5350 18.02 8.84 20 0.097 1 5470-5725 18.07 8.84 20 0.098 1 5745-5825 18.64 8.84 20 0.111 1 External antenna CDD mode 2412-2462 22.49 7.59 20 0.203 1 5180-5240 21.71 8.36 20 0.202 1 5250-5350 21.43 8.36 20 0.190 1 5470-5725 21.46 8.36 20 0.191 1 5745-5825 21.64 8.36 20 0.199 1 Beamforming mode 2412-2462 18.64 7.59 20 0.084 1 5180-5240 18.71 8.36 20 0.101 1 5250-5350 18.39 8.36 20 0.094 1 5470-5725 18.45 8.36 20 0.095 1 5745-5825 18.64 8.36 20 0.100 1 BT BT EDR 10.69 3.67 20 0.005 1 BT LE 6.58 3.67 20 0.002 1 Note: Internal antenna 2412~2462MHz: Directional gain = 4.95dBi + 10log(2) = 7.96dBi Internal antenna 5180~5825MHz: Directional gain = 5.83dBi + 10log(2) = 8.84dBi External antenna 2412~2462MHz: Directional gain = 4.58dBi + 10log(2) = 7.59dBi External antenna 5180~5825MHz: Directional gain = 5.35dBi + 10log(2) = 8.36dBi Report No.: SA161026C20D Page No. 6 / 7 Report Format Version: 6.1.1 Reference No.: 180511C01

Max. Power (dBm) Frequency Band Total Power (dBm) Power Limit (dBm) WLAN 2.4GHz BT EDR 2.4GHz 22.49 10.69 22.77 30 Max. Power (dBm) Frequency Band Total Power (dBm) Power Limit (dBm) WLAN 2.4GHz BT LE 2.4GHz 22.49 6.58 22.60 30 CONCULSION: Both of the WLAN 2.4G & WLAN 5G & BT can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz (Internal antenna) + WLAN 5GHz (Internal antenna) + BT EDR = 0.221 + 0.226 + 0.005 = 0.452 < 1 WLAN 2.4GHz (Internal antenna) + WLAN 5GHz (Internal antenna) + BT LE = 0.221 + 0.226 + 0.002 = 0.449 < 1 WLAN 2.4GHz (External antenna) + WLAN 5GHz (External antenna) + BT EDR = 0.203 + 0.202 + 0.005 = 0.410 < 1 WLAN 2.4GHz (External antenna) + WLAN 5GHz (External antenna) + BT LE = 0.203 + 0.202 + 0.002 = 0.407 < 1 Therefore the maximum calculations of above situations are less than the “1” limit. ---END--- Report No.: SA161026C20D Page No. 7 / 7 Report Format Version: 6.1.1 Reference No.: 180511C01


Document Created: 2019-03-22 21:31:11
Document Modified: 2019-03-22 21:31:11
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC