Users Manual.pdf

FCC ID: TVE-140701

Users Manual

Download: PDF
FCCID_3478605

FortiAP 221E, 223E QuickStart Guide

7/10/2017 Copyright© 2017 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features, or development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full any covenants, representations,and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.

QuickStart Guide Cautions and Warnings Environmental specifications Ambient operating temperature: 0C to 40C Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude). Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales (Température de fonctionnement, température de stockage, humidité et l'altitude). Safety Caution: This equipment is to be used in a Network Environment 0 per IECTR 62101. This product is connected only to PoE networks without routing to the outside plant. Attention: Ce matériel doit être utilisé dans un Environnement Réseau 0 par IECTR 62101. Ce produit est uniquement connecté aux réseaux PoE sans installation externe de routage.

Box Includes or FortiAP device QuickStart Guide X2 2.4 GHz X2 5 GHz (Externa antenna (Model 223E) models) 5 GHz 2.4 GHz Wall Mounting Hardware Antennae 4

Before You Begin Write down details typically provided by your network administrator or ISP. Static IP address IP address ___________________ Subnet Mask ___________________ Default Gateway ___________________ Primary/Secondary DNS ___________________ DHCP It is normal to not require a hostname, but your ISP might require it. Hostname ___________________ QuickStart Guide Video https://video.fortinet.com/video/177/ fortigate-and-fortiap 5

Internal221E FortiAP antenna models - Device FrontDevice Front : FortiAP 221E LED1: WLAN 2 (5GHz) LED5: Power Off: Wireless Link Off: No Power administratively disabled/off Green: Power on and Green: 5GHz Wireless Radio ready for operation enabled Blinking: Device booting Blinking: Transmitting and receiving data LED4: Status Off: FortiGate Wireless controller LED2: WLAN 1 (2.4GHz) has not been found Off: Wireless Link administratively disabled/off Amber: FortiGate Wireless controller has Green: 2.4GHz Wireless Radio enabled been found but this AP is not managed Blinking: Transmitting and receiving data Amber Blinking: Error/Fault in connecting to FortiGate Wireless controller Green: This AP is being managed by FortiGate Wireless controller LED3: Ethernet port Off: Ethernet Link administratively disabled/off Amber: 100Mbps is active Amber Blinking: Traffic is transmitting at 100Mbps Green: 1000Mbps is active Green Blinking: Traffic is transmitting at 1000Mbps 6

External223E FortiAP antenna models - Device FrontDevice Front: FortiAP 223E LED1: WLAN 2 (5GHz) Off: Wireless Link LED5: Power administratively disabled/off Green: 5GHz Wireless Radio Off: No Power enabled Green: Power on and Blinking: Transmitting and ready for operation receiving data Blinking: Device booting LED4: Status LED2: WLAN 1 (2.4GHz) Off: FortiGate Wireless controller Off: Wireless Link administratively disabled/off has not been found Green: 2.4GHz Wireless Radio enabled Amber: FortiGate Wireless controller has Blinking: Transmitting and receiving data been found but this AP is not managed Amber Blinking: Error/Fault in connecting LED3: Ethernet port to FortiGate Wireless controller Green: This AP is being managed by Off: Ethernet Link administratively disabled/off FortiGate Wireless controller Amber: 100Mbps is active Amber Blinking: Traffic is transmitting at 100Mbps Green: 1000Mbps is active Green Blinking: Traffic is transmitting at 1000Mbps 7

Internal antenna FortiAP 221E models - Device RearDevice Rear: LAN/PoE Power connection for optional power adapter. 12V DC, center positive. External FortiAP antenna 223E models - Device Rear Device Rear: 5.0 GHz 2.4 GHz Antenna Antenna LAN/PoE Power connection for optional power adapter. 12V DC, center positive. 5.0 GHz 2.4 GHz Antenna Antenna 8

ΠInstallation unlock lock 9

or The unit can be mounted on a wall or ceiling using the mounting hardware provided. The electrical wall box must be pre-installed. 10

 Basic Connection Network Core/FortiGate WAN/POE Connect the FortiAP device to a FortiGate controller or an Internet connection. Ensure that the Power over Ethernet (PoE) cable is connected to an applicable port on your FortiGate device or PoE injector. Caution: Adequate grounding must be provided to the FortiAP unit and the PoE injector, in compliance with your local electrical code or regulations. Warning: This device complies with IEEE 802.3af PoE specification. Do not use any PoE injectors that are not IEEE 802.3af compliant as they may damage your device. 11

Ž FortiAP Setup Deployment through a FortiGate Ensure that you are running the Fortinet recommended version of software. Please check support.fortinet.com for more information. If FortiGate is on the same network as the FortiAP: 1. Use FortiGate to preauthorize the FortiAP device. 2. Refer to the “Access Point Deployment” section of the FortiWiFi and FortiAP Configuration Guide found at http://forti.net/ap-docs. 3. Plug the FortiAP into your local Ethernet connection. The FortiAP will self- configure. Or 1. Instead of preauthorizing, you can use the FortiGate to authorize the FortiAP device after you have connected the FortiAP to the network. 2. Within two minutes of connecting the FortiAP to the FortiGate, the device appears on the Managed FortiAP page in the Web-based Manager: authorize and assign a profile to the device. 12

If FortiGate is not on the same network as the FortiAP: 1. Log into FortiAP directly (IP address: 192.168.1.2) with username admin and no password, and specify the IP address of the controlling FortiGate. 2. Connect to FortiAP via the CLI using the instructions in the “Connecting to FortiAP CLI” section of the FortiWiFi and FortiAP Configuration guide. 3. Specify the IP address of the controlling FortiGate: cfg -a AC_IPADDR_1=0.0.0.0 cfg -c where 0.0.0.0 is the address of the FortiGate. 4. The FortiAP device connects to FortiGate, and then you can authorize the FortiAP. 13

Cautions and Warnings Environmental specifications Ambient operating temperature: 0C to 40C Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude) Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales (Température de fonctionnement, température de stockage, humidité et l'altitude). Safety Battery – Risk of explosion if the battery is replaced by an incorrect type. Do not dispose of batteries in a fire. They may explode. Dispose of used batteries according to your local regulations. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries. Batterie – Risque d'explosion si la batterie est remplacée par un type incorrect. Ne jetez pas les batteries au feu. Ils peuvent exploser. Jetez les piles usagées conformément aux réglementations locales. IMPORTANT: Suisse: l'annexe 4.10 de SR814.013 s’appliquent aux batteries. 警告 本電池如果更換不正確會有爆炸的危險 請依製造商說明書處理用過之電池 Caution: This equipment is to be used in a Network Environment 0 per IECTR 62101. This product is connected only to PoE networks without routing to the outside plant. Attention: Ce matériel doit être utilisé dans un Environnement Réseau 0 par IECTR 62101. Ce produit est uniquement connecté aux réseaux PoE sans installation externe de routage. This product is intended to be supplied by a Listed Direct Plug-In Power Unit marked LPS or Class 2 and rated 12 Vdc, 2A or by 54 Vdc from PoE source. 14

Le produit doit être alimenté par un bloc d'alimentation à courant continu homologué UL de 12 Vdc, 2A nominal marqué LPS ou Class 2 ou par une source d’alimentation par Ethernet de 48 Vdc (PoE). Regulatory Notices Federal Communication Commission (FCC) – USA This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment 15

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution: Operation of this device is restricted to indoor use only. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Industry Canada Equipment Standard for Digital Equipment (ICES) – Canada This device Class BBcomplies This Class digital with ISED apparatus digital apparatus license-exempt complies complies RSS standard(s). withCanadian with Canadian ICES-003. Operation is subject to the ICES-003. following two conditions: (1) this device may not cause interference, and (2) this device must accept Cet any interference, Cet appareil appareil numériquede numérique including de classeinterference lalaclasse BBest that estconforme conformeà laàmay cause la norme norme undesired NMB-003 NMB-003 operation du Canada.of the du Canada. device. Innovation, Science and Economic Development (ISED) – Canada Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de This device complies with ISED license-exempt RSS standard(s). Operation is subject to the following licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, two conditions: et (2)may (1) this device l'utilisateur not causedeinterference, l'appareil doit andaccepter tout brouillage (2) this device must accept any radioélectrique subi, même interference, including si le brouillage interference est susceptible that may cause undesired d'en compromettre operation le of the device. fonctionnement. Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de For product licence. available est L'exploitation in the USA/Canada autorisée market, aux deux onlysuivantes conditions channel 1~11 can be operated. : (1) l'appareil Selection ne doit pas produire of deother channels brouillage, et (2) is not possible. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. For product Sélection available d'autres in the canauxmarket, USA/Canada n'est pas channel m onlypossible. 1~11 can be operated. Selection of other channels is not possible. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être environment. This equipment should be installed and operated with minimum distance 23cm between exploités.the radiator Sélection & yourcanaux d'autres body. n'est pas possible. Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 23cm de distance entre la source de rayonnement et votre corps. 16

Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful This interference equipment to co-channel complies with mobile ISED radiation satellite exposure systems. limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 23cm between the radiator & The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that your body. the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to- point operation as appropriate. Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement nonbe Users should also contrôlé. advised Cet équipement that doitradars high-power être installé et utiliséas are allocated avec un minimum primary de 23cm users (i.e. de priority users) of entre distance the bands 5650-5850 la source MHz andetthat de rayonnement votrethese radars could cause interference and/or corps. damage to LE-LAN devices. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the Attention: still equipment Le dispositif complies de lathe with bande 5150-5250 e.i.r.p. MHz est limits specified forréservé à un usage point-to-point intérieur afin de and non-point-to-point réduire l'interférence nuisible potentielle aux systèmes mobiles par satellite co-canal. operation as appropriate. Le gain Le gain maximal maximald’antenne d’antennepermis permis (pour (pour lesles dispositifs dispositifs utilisant utilisant la bande la bande 5725-5850 5725-5850 MHz)MHz) doit se doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le point, selon le cas. cas. De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissanceThe Caution: sont désignés device utilisateurs for the principaux band 5150-5250 MHz(c.-à-d., qu’ils is only for ontusage indoor la priorité) pour to reduce les bandes potential for 5650-5850 harmful MHz et que interference ces radarsmobile to co-channel pourraient causer satellite du brouillage systems. High-poweret/ou desare radars dommages allocated aux as dispositifs primary LAN-EL. users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. This device has been designed to operate with an antenna having a maximum gain of 4.58 dBi for 2.4GHz and 5.6 dBi for 5GHz. Antenna having a higher gain is strictly prohibited per Attention: Le dispositif de la bande 5150-5250 MHz est réservé à un usage intérieur afin de réduire regulations of ISED. The required antenna impedance is 50 ohms. l'interférence nuisible potentielle aux systèmes mobiles par satellite co-canal. Les radars à haute Under ISEDsont puissance regulations, désignés this commeradio transmitter utilisateurs may only principaux operate (à savoir lesusing an antenna utilisateurs of a type prioritaires) des and maximum bandes (or lesser) 5250-5350 MHzgain approved for et 5650-5850 MHzthe et transmitter by pourraient que ces radars ISED. To reduce causerpotential radio et / des interférences interference to other users, the antenna type and its gain should be so chosen that the ou endommager les périphériques LE-LAN equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device has been designed to operate with an antenna having a maximum gain of 4.58 dBi for 2.4GHz and 5.6 Ce dispositif dBiconçu a été for 5GHz. pourAntenna havingavec fonctionner a higher unegain is strictly antenne ayantprohibited per regulations un gain maximal de 4.58of dBi pour 2,4 ISED. TheGHz et 5.6antenna required dBi pour 5GHz. Une impedance antenne is 50 ohms. ayant un gain supérieur sont strictement interdites par la réglementation d'ISED. L'impédance d'antenne requise est de 50 ohms. Under ISED regulations, this radio transmitter may only operate using an antenna of a type and this device. maximum (or lesser) gain approved for the transmitter by ISED. To reduce potential radio interference Le présent émetteur radio (IC: 7280B-140701) a été approuvé par ISED pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le 17 gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.

Conformément to other users, theàantenna la réglementation type and itsd'ISED, cet émetteur gain should radiothat be so chosen peut thefonctionner seulement avec equivalent isotopically une antenne radiated powerd’un typeisetnot (e.i.r.p.) d'un gain more maximal than (ou inférieur) that necessary approuvé for successful pour l'émetteur par ISED. communication. Dans le but de réduire les risques de brouillage radioélectrique aux autres utilisateurs, il faut choisir Ce le type dispositif d'antenne a été et son conçu pour gain deavec fonctionner sorteune queantenne la puissance isotrope ayant un rayonnée gain maximal équivalente de 4.58 dBi pour (p. i.r.e.) 2,4 GHz neetdépasse pas l'intensité 5.6 dBi pour 5GHz. Unenécessaire à l'établissement antenne ayant d'une un gain supérieur sontcommunication réussie. strictement interdites par la réglementation d'ISED. L'impédance d'antenne requise est de 50 ohms. This radio transmitter (IC: 7280B-140701) has been approved by ISED to operate with the antenna typesàlisted Conformément below with d'ISED, la réglementation the maximum permissible cet émetteur gainfonctionner radio peut and required antennaavec une seulement impedance for each antenna type indicated. Antenna types not included in this list, having a antenne d’un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par ISED. Dans le but gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this de device. réduire les risques de brouillage radioélectrique aux autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse Le présent pas émetteur l'intensité radio nécessaire (IC: 7280B-140701) à l'établissement d'une acommunication été approuvé réussie. par ISED pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise This radiopour chaque(IC: transmitter type d'antenne. Les 7280B-140701) hastypes been d'antenne non approved by inclus ISED dans cette to operate withliste, ou dont le the antenna gain est types supérieur listed au gain below with maximal permissible the maximum indiqué, sont strictement gain interdits and required antennapour l'exploitation impedance de l' for each émetteur. antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum Thisindicated gain device and for it's thatantennas(s) mustprohibited type, are strictly not be co-located or this for use with operating device.in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product Le présent émetteur radio (IC: 7280B-140701) a été approuvé par ISED pour fonctionner avec les types procedures. d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour Cet appareil chaque et son antenne type d'antenne. (s) ned'antenne Les types doit pas non êtreinclus co-localisés ou fonctionnement dans cette en est liste, ou dont le gain association supérieur avec une autre antenne ou transmetteur. au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur. 18

Gain (dBi) Brand Quantity Antenna Type Connector Holder 2.4GHz 5GHz Internal antenna model Senao Networks, Inc 1 Printed IPEX 4.4 4.5 - Senao 1 Printed IPEX 4.5 - Networks, Inc Senao 1 Printed IPEX - 5.6 Networks, Inc Senao 1 Printed IPEX - 5.6 Networks, Inc Gain (dBi) Brand Quantity Antenna Type Connector Holder 2.4GHz 5GHz External antenna model Senao Networks, 2 Dipole RP SMA Plug 4.58 - Inc Senao Networks, 2 Dipole RP SMA Plug - 5.35 Inc 19

European Conformity (CE) - EU This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. The product transmits within the frequency ranges and less than or equal to the power listed below: 2412-2472MHz less than 20dBm 5180-5240MHz less than 23dBm 5260-5320MHz less than 23dBm * 5500-5700MHz less than 30dBm * Note: * Only with DFS bands certification. 20

Fortinet Customer Service & Support Create a support account, register and manage your products, download updates, firmware images and release notes, and create technical support tickets. https://support.fortinet.com Fortinet Document Library Up-to-date versions of Fortinet publications for the entire family of Fortinet products. http://docs.fortinet.com Training Services Course descriptions, availability, schedules, and location of training programs in your area. http://www.fortinet.com/training Technical Discussion Forums Communicate with other customers and Fortinet partners about Fortinet products, services, and configuration issues. https://support.fortinet.com/forum FortiGuard Threat Research and Response Up-to-date information on vulnerabilities and threats, includes a virus scanner, IP signature look-up, and web filtering tools. http://www.fortiguard.com Fortinet.com


Document Created: 2017-07-20 10:20:38
Document Modified: 2017-07-20 10:20:38
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC