RF Exposure Info (MPE).pdf

FCC ID: TVE-121402

RF Exposure Info

Download: PDF
FCCID_2222351

RF EXPOSURE REPORT REPORT NO.: SA140213C04 MODEL NO.: FORTIAP-221Cxxxxxx, FAP-221Cxxxxxx (where “x” can be used as “A-Z”, or “0-9”, or “-”, or blank for software changes or marketing purposes only) FCC ID: TVE-121402 IC: 7280B-121402 RECEIVED: Feb. 13, 2014 TESTED: Feb. 18 ~ Feb. 25, 2014 ISSUED: Feb. 25, 2014 APPLICANT: Fortinet Inc. ADDRESS: 899 Kifer Road Sunnyvale, CA 94086, USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA140213C04 1 of 8 Report Format Version 5.0.0

TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................. 3 1. CERTIFICATION ........................................................................................................... 4 2. RF EXPOSURE ............................................................................................................. 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ....................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................. 6 2.3 CLASSIFICATION ......................................................................................................... 6 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ................................ 7 Report No.: SA140213C04 2 of 8 Report Format Version 5.0.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140213C04 Original release Feb. 25, 2014 Report No.: SA140213C04 3 of 8 Report Format Version 5.0.0

1. CERTIFICATION PRODUCT: Security Wireless Access Point FORTIAP-221Cxxxxxx, FAP-221Cxxxxxx (where “x” can MODEL: be used as “A-Z”, or “0-9”, or “-”, or blank for software changes or marketing purposes only) BRAND: Fortinet APPLICANT: Fortinet Inc. TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 RSS-102 Issue 4 (2010-12) The above equipment (Model: FORTIAP-221C) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Feb. 25, 2014 Celine Chou / Specialist APPROVED BY : , DATE : Feb. 25, 2014 Ken Liu / Senior Manager Report No.: SA140213C04 4 of 8 Report Format Version 5.0.0

2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) For FCC Part 2 (Section 2.1091) FREQUENCY ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY AVERAGE TIME RANGE (MHz) STRENGTH (V/m) STRENGTH (A/m) (mW/cm2) (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz For RSS-102 Issue 4 (2010-12) FREQUENCY ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY AVERAGE TIME RANGE (MHz) STRENGTH (V/m) STRENGTH (A/m) (W/m2) (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 … … F/150 6 1500-100,000 … … 10 6 F = Frequency in MHz Report No.: SA140213C04 5 of 8 Report Format Version 5.0.0

2.2 MPE CALCULATION FORMULA For FCC Part 2 (Section 2.1091) Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm For RSS-102 Issue 4 (2010-12) Pd = (Pout*G) / (4*pi*r2) where Pd = power density in W/m2 Pout = output power to antenna in W G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in meter 2.3 CLASSIFICATION For FCC Part 2 (Section 2.1091) The antenna of this product, under normal use condition, is at least 22cm away from the body of the user. So, this device is classified as Mobile Device. For RSS-102 Issue 4 (2010-12) The antenna of this product, under normal use condition, is at least 0.22m away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA140213C04 6 of 8 Report Format Version 5.0.0

2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For FCC Part 2 (Section 2.1091) EUT FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (dBm) (cm) (mW/cm2) (MHz) (dBi) (mW/cm2) 2412-2462 29.98 5.79 22 0.621 1 5180-5240 16.74 7.52 22 0.044 1 5745-5825 23.87 7.52 22 0.226 1 NOTE: 1. 2.4GHz: Directional gain = 10 log[(10G1 /20 + 10G2 /20 + ... + 10GN /20)2 /NANT]= 5.79 2. 5GHz: Directional gain = 10 log[(10G1 /20 + 10G2 /20 + ... + 10GN /20)2 /NANT]= 7.52 802.11 ac Module FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (dBm) (cm) (mW/cm2) (MHz) (dBi) (mW/cm2) 5180-5240 16.99 8.76 22 0.062 1 5745-5825 24.70 8.76 22 0.365 1 NOTE: Directional gain = 10 log[(10G1 /20 + 10G2 /20)2 /2] = 8.76dBi CONCULSION: Both of the EUT & 802.11 ac Module can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density EUT WLAN 2.4G + 802.11 ac Module WLAN 5.0G = 0.621 + 0.365 = 0.986 Therefore, the maximum calculation of this situation is 0.985, which is less than the “1” limit. Report No.: SA140213C04 7 of 8 Report Format Version 5.0.0

For RSS-102 Issue 4 (2010-12) EUT FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (dBm) (m) (W/m2) (MHz) (dBi) (W/m2) 2412-2462 29.98 5.79 0.2 6.208 10 5180-5240 16.74 7.52 0.2 0.438 10 5745-5825 23.87 7.52 0.2 2.264 10 NOTE: 1. 2.4GHz: Directional gain = 10 log[(10G1 /20 + 10G2 /20 + ... + 10GN /20)2 /NANT]= 5.79 2. 5GHz: Directional gain = 10 log[(10G1 /20 + 10G2 /20 + ... + 10GN /20)2 /NANT]= 7.52 802.11 ac Module FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (dBm) (m) (W/m2) (MHz) (dBi) (W/m2) 5180-5240 16.99 8.76 0.2 0.618 10 5745-5825 24.70 8.76 0.2 3.647 10 G1 /20 G2 /20 2 NOTE: Directional gain = 10 log[(10 + 10 ) /2] = 8.76dBi CONCULSION: Both of the EUT & 802.11 ac Module can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 10 CPD = Calculation power density LPD = Limit of power density EUT WLAN 2.4G + 802.11 ac Module WLAN 5.0G = 6.208 + 3.647 = 9.855 Therefore, the maximum calculation of this situation is 0.985, which is less than the “10” limit. Report No.: SA140213C04 8 of 8 Report Format Version 5.0.0


Document Created: 2014-03-11 17:07:07
Document Modified: 2014-03-11 17:07:07
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC