RF Exposure Info.pdf

FCC ID: TVE-0120201

RF Exposure Info

Download: PDF
FCCID_1965925

                                     RF EXPOSURE REPORT

                                       REPORT NO.: SA111005C22A
                                         MODEL NO.: EMP7618, EMP7618-FT
                                                 FCC ID: TVE-0120201
                                           RECEIVED: Mar. 07, 2013
                                                TESTED: Mar. 11 ~ May 09, 2013
                                                 ISSUED: May 13, 2013


                              APPLICANT: Fortinet, Inc.
                                 ADDRESS: 1090 Kifer Road Sunnyvale, CA 94086, USA


                               ISSUED BY: Bureau Veritas Consumer Products Services
                                          (H.K.) Ltd., Taoyuan Branch
                        LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist.,
                                     New Taipei City, Taiwan, R.O.C.
                    TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei
                                   Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C.




    This report should not be used by the client to claim
    product certification, approval, or endorsement by any
    government agencies.




This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is
permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set
forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or
identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the
information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our
negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue
within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the
report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or
non-compliance to the specification.

 Report No.: SA111005C22A                                                   1 of 6                                          Report Format Version 5.0.0
 Reference No.: 130307C02


                                         TABLE OF CONTENTS

RELEASE CONTROL RECORD ................................................................................................ 3
1.       CERTIFICATION ............................................................................................................. 4
2.       RF EXPOSURE ............................................................................................................... 5
2.1      LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 5
2.2      MPE CALCULATION FORMULA .................................................................................... 5
2.3      CLASSIFICATION ........................................................................................................... 5
2.4      CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................. 6




Report No.: SA111005C22A                                        2 of 6                                    Report Format Version 5.0.0
Reference No.: 130307C02


                            RELEASE CONTROL RECORD

 ISSUE NO.             REASON FOR CHANGE              DATE ISSUED
 SA111005C22A          Original release.              May 13, 2013




Report No.: SA111005C22A                   3 of 6    Report Format Version 5.0.0
Reference No.: 130307C02


1. CERTIFICATION

             PRODUCT: 802.11 abgn RF Module Card
                 MODEL: EMP7618, EMP7618-FT
                 BRAND: Fortinet
           APPLICANT: Fortinet, Inc.
                TESTED: Mar. 11 ~ May 09, 2013
      TEST SAMPLE: ENGINEERING SAMPLE
         STANDARDS: FCC Part 2 (Section 2.1091)
                           FCC OET Bulletin 65, Supplement C (01-01)
                           IEEE C95.1



 The above equipment (Model: EMP7618) has been tested by Bureau Veritas
 Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance
 with the requirement of the above standards. The test record, data evaluation &
 Equipment Under Test (EUT) configurations represented herein are true and accurate
 accounts of the measurements of the sample’s EMC characteristics under the
 conditions specified in this report.




     PREPARED BY :                                      , DATE :   May 13, 2013
                             Polly Chien / Specialist


    APPROVED BY :                                       , DATE :   May 13, 2013
                            Ken Liu / Senior Manager




Report No.: SA111005C22A                       4 of 6                Report Format Version 5.0.0
Reference No.: 130307C02


2. RF EXPOSURE
2.1    LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)

   FREQUENCY               ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY    AVERAGE TIME
   RANGE (MHz)             STRENGTH (V/m) STRENGTH (A/m)   (mW/cm2)         (minutes)
                 LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE
      300-1500                  …              …            F/1500               30
   1500-100,000                 …              …              1.0                30

F = Frequency in MHz


2.2    MPE CALCULATION FORMULA

Pd = (Pout*G) / (4*pi*r2)
where
Pd = power density in mW/cm2
Pout = output power to antenna in mW
G = gain of antenna in linear scale
Pi = 3.1416
R = distance between observation point and center of the radiator in cm


2.3    CLASSIFICATION

The antenna of this product, under normal use condition, is at least 20cm away from the
body of the user. So, this device is classified as Mobile Device.




Report No.: SA111005C22A                      5 of 6                 Report Format Version 5.0.0
Reference No.: 130307C02


2.4    CALCULATION RESULT OF MAXIMUM CONDUCTED POWER
2.4G + 5G combo Module
FREQUENCY                                              ANTENNA                       POWER
                  MODULATION          MAX POWER                DISTANCE                              LIMIT
   BAND                                                  GAIN                       DENSITY
                    MODE                (dBm)                     (cm)                             (mW/cm2)
   (MHz)                                                 (dBi)                      (mW/cm2)

                      802.11b              16.2               6.01        20           0.033            1

                      802.11g              26.3               6.01        20           0.339            1
  2412-2462
                 802.11n (20MHz)           25.9               6.01        20           0.309            1

                 802.11n (40MHz)           21.3               6.01        20           0.107            1

                      802.11a              13.4               9.01        20           0.035            1

  5180-5240      802.11n (20MHz)           15.0               9.01        20           0.050            1

                 802.11n (40MHz)           16.7               9.01        20           0.074            1

                      802.11a              23.4               9.01        20           0.347            1

  5745-5825      802.11n (20MHz)           23.7               9.01        20           0.371            1

                 802.11n (40MHz)           24.6               9.01        20           0.457            1


NOTE:
1. 2.4G: Directional gain = 3dBi + 10log(2) = 6.01dBi
2. 5G: Directional gain = 6dBi + 10log(2) = 9.01dBi
3. For max. power, please refer to the original report no.: RF111005C22 and RF111005C22-1.



CONCULSION:
Both of the WLAN 2.4G & 5.0G can transmit simultaneously, the formula of calculated the MPE is:
CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1
CPD = Calculation power density
LPD = Limit of power density
WLAN 2.4G + WLAN 5.0G = 0.339 + 0.457 = 0.796
Therefore, the maximum calculation of this situation is 0.796, which is less than the “1” limit.




Report No.: SA111005C22A                             6 of 6                           Report Format Version 5.0.0
Reference No.: 130307C02



Document Created: 2013-05-16 16:43:24
Document Modified: 2013-05-16 16:43:24

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC