Cover Letter Modular Approval Request

FCC ID: TVE-0120201

Cover Letter(s)

Download: PDF
FCCID_1609858

FCC ID: TVE-0120201 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch December 19, 2011 Dear Application Examiner, Fortinet, Inc., It’s an 802.11 abgn RF Module Card. FCC ID: TVE-0120201 would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip AR9382. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is RT8010. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. Report No.: RF111005C22

Foo ID: TVE—0120201 7. "The modular transmilter must comply with any specific ule or operating requirements applicable to the transmiter and the manufacturer must provide adequate inshuctions along with the module to explain any such requirements." The EUT is compliant with all applicable FCC rules. Detail instructions for mainlaining compliance are given in the Users Manual. 8. "The modular transmitter must comply with any applicable RF exposure requirements." The EUT is compliant wiall apglicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Gary Chang Technical Manager Bureau Veritas Gonsumer Products Services (HK.) Lid., Taoyuan Branch Report No.: RFT1100sC22


Document Created: 2011-12-19 09:46:42
Document Modified: 2011-12-19 09:46:42
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC