Class II Permissive Change

FCC ID: TV7SXT-5ND

Cover Letter(s)

Download: PDF
FCCID_3337073

                         ROGERS LABS, INC.
                         4405 West 259th Terrace
                         Louisburg, KS 66053
                         Phone / Fax (913) 837-3214


March 28, 2017

Timco Engineering Inc.
849 NW State Road 45
Newberry, FL 32669

Federal Communications Commission
Equipment Approval Services
P.O. Box 35815
Pittsburgh, PA 15251-3315

Applicant:     Mikrotikls SIA
               Pernavas 46 Str.
               Riga, Latvia LV-1009

Equipment: FCC ID: TV7SXT-5ND
FCC Rules: 47CFR Part 15.407 NII Class 2 permissible change

Gentlemen

The form 731 and application have been electronically submitted and any attachments will be up loaded
to your site to be used in processing Class 2 permissible change to this certified equipment.

Change from the original design was provided through firmware (software) change and this equipment
was not certified as SDR equipment. The electronics remain identical to original design.

The design was authorized under 47 CFR 15.247 on 2/5/2013 for operation in the 5745-5825 MHz band
as granted 7/3/2014. Compliance to meet the new 15.407 regulations required power reduction in the
5745-5825 MHz band. The change application also addresses the addition of U-NII-1 frequency
operation in the 5180-5240 MHz frequency band. While not explicitly addressed in the report, the
requirement of KDB926956 Q&A #7 c):, compliance with the new regulations are demonstrated
including: software security, Band-edge measurements, Band Power, high and low channel emissions,
Power Spectral Density and power reduction when used with high gain antennas. There is no change
to the integral antenna as previously authorized.

Please review the application and process it as Class 2 permissible change under original FCC Identifier
FCC ID: TV7SXT-5ND




File: RBSXT5nDr2-US C2PC Submittal letter                                              Page 1 of 2


 Page 2                                                                      March 28, 2017
Permanent
Mikrotikls SIA requests that the material in the Schematics, Block Diagram, and Operational
Descriptions be withheld from public disclosure pursuant to Sections 0.457 and 0.459 of the
Commission’s Rules following grant of the application.
Schematics                   RBSXT5nDr2-US Conf Schem.pdf
Block diagram                RBSXT5nDr2-US Conf BlkDia.pdf
Operational Description      RBSXT5nDr2-US Conf OpDes.pdf
Operational Description      RBSXT5nDr2-US Conf OpDes KDB 594280.pdf

Should you require any further information, please contact the undersigned.
Thank you for your consideration in this matter.

Sincerely,

Scot Rogers
Rogers Labs, Inc.
Enclosures



Document Created: 2017-03-28 10:34:50
Document Modified: 2017-03-28 10:34:50

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC