MPE report

FCC ID: TV7RBD52-5ACD2ND

RF Exposure Info

Download: PDF
FCCID_3714240

Company: MikroTik Test of: RBD52G-5HacD2HnD-TC To: FCC CFR 47 Part 1.1310 Report No.: MIKO65-MPE FCC Rev A MPE/RF EXPOSURE TEST REPORT

MPE/RF EXPOSURE TEST REPORT FROM Test of: MikroTik RBD52G-5HacD2HnD-TC To: FCC CFR 47 Part 1.1310 Test Report Serial No.: MIKO65-MPE FCC Rev A This report supersedes: NONE Applicant: MikroTik Aizkraukles iela 23 Riga, LV-1006 Latvia Product Function: 802.11b/g/n/ac wireless router Issue Date: 22nd December 2017 This Test Report is Issued Under the Authority of: MiCOM Labs, Inc. 575 Boulder Court Pleasanton California 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com MiCOM Labs is an ISO 17025 Accredited Testing Laboratory

Title: MikroTik RBD52G-5HacD2HnD-TC To: FCC CFR 47 Part 1.1310 Serial #: MIKO65-MPE FCC Rev A nd Issue Date: 22 December 2017 Page: 3 of 6 1. MAXIMUM PERMISSABLE EXPOSURE Calculations for Maximum Permissible Exposure Levels Power Density = Pd (mW/cm2) = EIRP/(4*π*d2) EIRP = P * G P = Peak output power (mW) G = Antenna numeric gain (numeric) d = Separation distance (cm) Numeric Gain = 10 ^ (G (dBi)/10) The calculations in the table below use the highest conducted power values together with the lowest antenna gain specified for the EUT. These calculations represent worst case in terms of the exposure levels. Calculated Calculated Min Peak Peak Power Power Ant Numeric Power Calculated Output Output Density Density Freq. Band (MHz) Gain Gain Density safe Power Power Limit (mW/cm2) (dBi) (numeric) (mW/cm2) distance for (dBm) (mW) (mW/cm2) @ Safe @ 20cm Limit (cm) Distance 2400.0 - 2483.5 2.50 1.78 24.01 251.75 0.09 1.00 6.00 1.00 5150.0 - 5250.0 2.50 1.78 21.06 127.60 0.05 1.00 5.00 1.00 5725.0 - 5850.0 2.50 1.78 20.36 108.67 0.04 1.00 4.00 1.00 Note: for mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculations indicate the MPE distance to be less. For non-DFS operation the unit is limited to transmitting one of the following modes; Mode 0 Mode 1 a).. 2.4 GHz WiFi a).. 2.4 GHz WiFi b).. UNII Band 1 WiFi b).. UNII Band 3 WiFi This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

Title: MikroTik RBD52G-5HacD2HnD-TC To: FCC CFR 47 Part 1.1310 Serial #: MIKO65-MPE FCC Rev A nd Issue Date: 22 December 2017 Page: 4 of 6 Assessment for simultaneous operation Mode 0: Minimum Power Peak Peak Safe Power Ant Numeric Density Output Output Distance Density Summation Freq. Band (MHz) Gain Gain Limit Power Power for (mW/cm2) Ei/Eref (dBi) (numeric) (mW/cm2) (dBm) (mW) Summation @ 20cm Eref (cm) 2400.0 - 2483.5 2.50 1.78 24.01 251.75 20 1.00 0.09 0.09 5150.0 - 5250.0 2.50 1.78 21.06 127.60 20 1.00 0.05 0.05 Total Evaluation: 0.14 The Total Evaluation was calculated using the formula: Where Ei: calculated E-field Strength for transmitter Eref: E-field strength related limit Assessment for simultaneous operation Mode 1: Minimum Power Peak Peak Safe Power Ant Numeric Density Output Output Distance Density Summation Freq. Band (MHz) Gain Gain Limit Power Power for (mW/cm2) Ei/Eref (dBi) (numeric) (mW/cm2) (dBm) (mW) Summation @ 20cm Eref (cm) 2400.0 - 2483.5 2.50 1.78 24.01 251.75 20 1.00 0.09 0.09 5725.0 - 5850.0 2.50 1.78 20.36 108.67 20 1.00 0.04 0.04 Total Evaluation: 0.13 The Total Evaluation was calculated using the formula: Where Ei: calculated E-field Strength for transmitter Eref: E-field strength related limit This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

Title: MikroTik RBD52G-5HacD2HnD-TC To: FCC CFR 47 Part 1.1310 Serial #: MIKO65-MPE FCC Rev A nd Issue Date: 22 December 2017 Page: 5 of 6 Specification - Maximum Permissible Exposure Limits TABLE 1—LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency range Electric field strength Magnetic field strength Power density Averaging time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f2 6 30-300 61.4 0.163 1.0 6 300-1,500 -- -- f/300 6 1,500-100,000 -- -- 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f2 30 30-300 27.5 0.073 0.2 30 300-1,500 -- -- f/1500 30 1,500-100,000 -- -- 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

575 Boulder Court Pleasanton, California 94566, USA Tel: +1 (925) 462 0304 Fax: +1 (925) 462 0306 www.micomlabs.com


Document Created: 2017-12-22 18:45:32
Document Modified: 2017-12-22 18:45:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC