RF Exposure Report

FCC ID: TV7OMNITIKPG5HACD

RF Exposure Info

Download: PDF
FCCID_3161312

Company: MikroTik Assessment of: MikroTik RBOmniTikPG-5HacD To: FCC CFR 47 §1.1310 Exposure Limits Report No.: MIKO51-MPE MPE TEST REPORT

MPE TEST REPORT FROM Assessment of: MikroTik RBOmniTikPG-5HacD to To: FCC CFR 47 §1.1310 Exposure Limits Test Report Serial No.: MIKO51 - OmniTIK 5 PoE ac FCC IC EU This report supersedes: NONE Applicant: MikroTik Aizkraukles iela 23 Riga, LV 1006 Latvia Product Function: Wireless Access Point Issue Date: 7th October 2016 This Test Report is Issued Under the Authority of: MiCOM Labs, Inc. 575 Boulder Court Pleasanton California 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com MiCOM Labs is an ISO 17025 Accredited Testing Laboratory

Title: MikroTik RBOmniTikPG-5HacD To: FCC CFR 47 §1.1310 Exposure Limits Serial #: MIKO51-MPE Issue Date: 7th October 2016 Page: 3 of 5 1. MAXIMUM PERMISSABLE EXPOSURE Calculations for Maximum Permissible Exposure Levels Power Density = Pd (mW/cm ) = EIRP/(4*π*d ) 2 2 EIRP = P * G P = Peak output power (mW) G = Antenna numeric gain (numeric) d = Separation distance (cm) Numeric Gain = 10 ^ (G (dBi)/10) Because the EUT belongs to the General Population/Uncontrolled Exposure the limit of power density is 2 1.0 mW/cm The calculations in the table below use the highest conducted power values together with the lowest antenna gain specified for the EUT. These calculations represent worst case in terms of the exposure levels. Calculated Peak Peak Calculated Minimum Ant Numeric Safe Freq. Band Output Output Power Separation Gain Gain Distance (MHz) Power Power Density @ Distance (dBi) (numeric) @ (dBm) (mW) 2 20cm (cm) 1mW/cm 5725.0 - 5850.0 7.50 5.62 25.99 396.90 13.33 0.44 20.00 5150.0 – 5250.0 7.50 5.62 15.44 34.99 3.96 0.04 20.0 Note: for mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculations indicate the MPE distance to be less. This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

Title: MikroTik RBOmniTikPG-5HacD To: FCC CFR 47 §1.1310 Exposure Limits Serial #: MIKO51-MPE Issue Date: 7th October 2016 Page: 4 of 5 Specification Maximum Permissible Exposure Limits 2 FCC §1.1310 Limit = 1mW / cm from 1.310 Table 1 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

575 Boulder Court Pleasanton, California 94566, USA Tel: +1 (925) 462 0304 Fax: +1 (925) 462 0306 www.micomlabs.com


Document Created: 2017-12-16 00:06:14
Document Modified: 2017-12-16 00:06:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC