RF Exposure (MPE)

FCC ID: TV7LHG5ACD

RF Exposure Info

Download: PDF
FCCID_4458945

MPE/RF EXPOSURE EVALUATION REPORT FCC Part 15 RF Exposure Requirements Report No.: MIKO92_MPE FCC Rev A Company: Mikrotikls SIA Model: RBLHGG-5acD Wireless Module

MPE/RF EXPOSURE EVALUATION REPORT Company: Mikrotikls SIA Model: RBLHGG-5acD Wireless Module To: FCC CFR 47 Part 1.1310 Test Report Serial No.: MIKO92_MPE FCC Rev A This report supersedes: NONE Applicant: Mikrotikls SIA Brivibas gatve 214i Riga, LV-1039 Latvia Product Function: 802.11ac WLAN access point Issue Date: 9th September 2019 This Test Report is Issued Under the Authority of: MiCOM Labs, Inc. 575 Boulder Court Pleasanton California 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com MiCOM Labs is an ISO 17025 Accredited Testing Laboratory

Title: Mikrotikls RBLHGG-5acD Wireless Module To: FCC CFR 47 Part 1.1310 Serial #: MIKO92_MPE FCC Rev A 1. MAXIMUM PERMISSABLE EXPOSURE Calculations for Maximum Permissible Exposure Levels Power Density = Pd (mW/cm2) = EIRP/(4*π*d2) EIRP = P * G P = Peak output power (mW) G = Antenna numeric gain (numeric) d = Separation distance (cm) Numeric Gain = 10 ^ (G (dBi)/10) The calculations in the table below use the highest conducted power values together with the lowest antenna gain specified for the EUT. The RBLHGG-5acD Wireless Module can only transmit on a single frequency at any given time therefore the following calculations represent worst case exposure levels. Calculated Calculated Min Peak Peak Power Power Ant Numeric Power Calculated Output Output Density Density Freq. Band (MHz) Gain Gain Density safe Power Power Limit (mW/cm2) (dBi) (numeric) (mW/cm2) distance for (dBm) (mW) (mW/cm2) @ Safe @ 20cm Limit (cm) Distance 5250.0 - 5350.0 9.00 7.94 18.95 78.50 0.12 1.00 8.00 1.00 5470.0 - 5725.0 9.00 7.94 16.87 48.68 0.08 1.00 6.00 1.00 Note: for mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculations indicate the MPE distance to be less. Specification - Maximum Permissible Exposure Limits The Limit is defined in Table 1 of FCC §1.1310. Issue Date: 9th September 2019 Page: 3 of 4 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

575 Boulder Court Pleasanton, California 94566, USA Tel: +1 (925) 462 0304 Fax: +1 (925) 462 0306 www.micomlabs.com


Document Created: 2019-10-29 23:14:47
Document Modified: 2019-10-29 23:14:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC