RF_exposure_report

FCC ID: TV7D25-5HPQ2HP

RF Exposure Info

Download: PDF
FCCID_4296051

MPE/RF EXPOSURE REPORT Company: Mikrotikls SIA (MikroTik) Evaluation of: RBD25G-5HPacQD2HPnD-US To: FCC CFR 47 Part 1.1310 Report No.: MIKO81 RBD25G-5HPacQD2HPnD-US FCC MPE Rev A

MPE/RF EXPOSURE REPORT FROM Evaluation of: Mikrotikls SIA (MikroTik) RBD25G-5HPacQD2HPnD-US (Audience) To: FCC CFR 47 Part 1.1310 Report Serial No.: MIKO81 RBD25G-5HPacQD2HPnD-US FCC MPE Rev A This report supersedes: NONE Applicant: Mikrotikls SIA (MikroTik) Brivibas gatve 214i Riga, LV-1039 Latvia Product Function: 802.11a/b/g/n/ac WLAN router + LTE Customer Premises Equipment Issue Date: 21st May 2019 This Report is Issued Under the Authority of: MiCOM Labs, Inc. 575 Boulder Court Pleasanton California 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com MiCOM Labs is an ISO 17025 Accredited Testing Laboratory

Title: MikroTik RBD25G-5HPacQD2HPnD-US To: FCC CFR 47 Part 1.1310 Serial #: MIKO81 Audience Kit FCC MPE Rev A 1. MAXIMUM PERMISSABLE EXPOSURE Calculations for Maximum Permissible Exposure Levels 2 2 Power Density = Pd (mW/cm ) = EIRP/(4*π*d ) EIRP = P * G P = Peak output power (mW) G = Antenna numeric gain (numeric) d = Separation distance (cm) Numeric Gain = 10 ^ (G (dBi)/10) The calculations in the table below use the highest conducted power values together with the antenna gain specified for the EUT. These calculations represent worst case in terms of the exposure levels. Calculated Peak Peak Power Ant Numeric Power Output Output Density Min Calculated safe Freq. Band (MHz) Gain Gain Density Power Power Limit distance for Limit (cm) (dBi) (numeric) (mW/cm2) (dBm) (mW) (mW/cm2) @ 20cm 5150.0 - 5250.0 2.50 1.78 27.53 566.24 0.200 1.00 8.951 2400.0 - 2483.5 3.50 2.24 19.5 89.13 0.040 1.00 3.985 5725.0 - 5850.0 4.50 2.82 26.57 453.94 0.255 1.00 10.090 Note: for mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculations indicate the MPE distance to be less. Specification - Maximum Permissible Exposure Limits The Limit is defined in Table 1 of FCC §1.1310. Issue Date: 21st May 2019 Page: 3 of 4 This Report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com

575 Boulder Court Pleasanton, California 94566, USA Tel: +1 (925) 462 0304 Fax: +1 (925) 462 0306 www.micomlabs.com


Document Created: 2019-05-28 07:54:02
Document Modified: 2019-05-28 07:54:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC