DTS UNII declaration

FCC ID: TV7CPGI5ACD2ND

Cover Letter(s)

Download: PDF
FCCID_3602547

Mikrotikls SA
Pernavas 46, Riga, Latvia, LV—1009

                                        UNII Declaration Letter

We have declared below featured for FCC equipment authorization, device FCC D:
TVZCPGISACD2ND

(1) DFS Device ——           C] Master, C Client with Radar detectior capabilty .
                            [] Client without radar detection capabiity,                 NA
(2) Active / Passive Scanning , adhoc mode access point capabiity
      Frequency Band           ActveScanning           passive scanning           Ad Hoo Mode              Access point
          (MbHz)                (the device can        (where the device            capablity               capabiity
                               transmit a probe                is
                                   (beacon))             can listen only
                                                            with no
                                                            probes)
     2412 — 2462 Mz           H Yes. E No              E Yes. H No              H Yes. E No              E Yes. E No
     2492 — 2452 MHz            Yes,_[Z] No                Yes.        No         Yes._[2] No              Yes,   No
     5150 — 5240 MHz          [] Yes. [ No             [X Yes.      [] No       [J Yes.     _( No        [ Yes.      [ No
     5190 — 5280 MHz          [J Yes, [d No            (X] Yes. [J No           [J Yes. ) No             B4 ¥es. [ No
(3) Country code selection abilty — C] Yes . J No
If no, pis explain how was implemented : The country code has been set at the factory and the end—
user has no opportunity to change it by himselt.
(4) Meet 15.202 requirement — [ Yes., [C] No .
  is cheok below :
     A master device is defined as a device operating in a mode in which it has the capabilty to
transmit wihout receiving an enabling signal. in this modeit is able to select a channel and inilate a
network by sending enabling signals to other devices
[] A client device is defined as a device operating in a mode in which the transmissions of the device
are under control of the master. A device in client moe is not able to initiate a network.
(5) For client devicesthat have software configuration control to operate in different modes (active
scanning in some and passive scanning in others) in different bands (devices with muliple equipment
lasses or those that operate on non—DFS frequencies) or modular cevices which contigure the modes
of operations through software, the application must provide software and operations description on
how the software and / or harcwars is implemented to ensure that proper operations modes can not
be modified by end user or an installer.
C Apply .         No Apply.
(F apoly is help to provide explanation on how it was implement (By harchrare or sttware, and how softvare vasscontraled)

If you haveany questions, please feelfree to contact me at the address shown below.

Yours sincerely,

Signatory




Mikrotikls SA
Contact person: Edmunds Zvegincevs
~itle: engineer, R&D



Document Created: 2017-10-11 09:40:13
Document Modified: 2017-10-11 09:40:13

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC