Users Manual

FCC ID: TUVMSEB

Users Manual

Download: PDF
FCCID_615828

RF Wireless Optical Mouse User Manual The Steps of Install Battery acuate object within 10 seconds, 7. No need to check the digital 1. Please prepare for two PCS the receiver light will flash very connection within 10 seconds when Welcome new AAA alkaline batteries fast, a few seconds later it will change the batteries, if more than that please according to the above Thank you for selecting this product! 2. Press the button of the mouse be on which shows it is way to re-operate. Your RF wireless optical mouse uses a newly upper cover and pull the battery successfully to finish the digital 8. if you put the receiver into developed RF wireless technology 27MHz cover rearward (Please see the transmission between the mouse transmitter, power are cut down that replaces the traditional wired mouse. You reference picture) and the receiver. You may start automatically, and you can take can use your wireless optical mouse freely 3. Please insert the batteries to use it. them away. and improve your efficiency and enjoy your correctly according to the 3. 3. Working distance: within Caution beautiful life from the high technology. The polarity marks of the battery 0.6-1.5 m. Any changes or modifications not receiver of this mouse can be put into its grooves. expressly approved by the party transmitter, and it is an outstanding design. 4. Pull the battery covers forward, Attention Please responsible for compliance could void the user's authority to operate the when you hear “crack” sound 1. Please don’t make the mouse far equipment. which shows the battery cover away from the receiver in Note Product Features is locked successfully.。 Note: This device complies with Part 15 of 1. Radio frequency 27MHz, the FCC Rules. enjoy your freely wireless Receiver Installation Operation is subject to the following space 1. please use extended cable, and two conditions: 2. It has 256 ID code, there is put the receiver and transmitter (1) This device may not cause no interference even many on one desktop, in this way, harmful interference, and mice being used at the you may have higher working (2) This device must accept any interference received, including same time. efficiency. interference that may cause 3. Automatically save power ID connect undesired operation. sleeping functions, battery These limits are designed to provide life be prolonged. reasonable protection against harmful Push battery 4. super mini build-in cover interference in a residential installation. This equipment generates, uses and can receiver, outstanding radiate radio frequency energy and, if order to work more smoothly. not installed and used in accordance design. 2. You’d better use the mouse on the with the instructions, may cause harmful white desk, in this way the batteries interference to radio communications. can be used longer time. Please However, there is no guarantee that Systems Compatibility remove the batteries if the mouse interference will not occur in a particular will not be used for a long time. installation. If this equipment does cause IBM PC and Win 3. This mouse with save power sleeping harmful interference to radio or 95/98/Me/2000/XP, No need driver functions, please press any key or television reception, which can be Build-in mini receiver determined by turning the equipment off scroll the wheel to wake up the As bellow, press the receiver-out and on, the user is encouraged to try to 2. If you use PS/2 connector, mouse when it is sleeping. button, and then the receiver can correct the interference by one or more please use the USB to PS/2 4. If you want to take off the mouse spring out automatically, at this power, please continue to press the of the following measures: adaptor and connect with the time, mouse begin to work. If ID switch of the mouse bottom * Reorient or relocate the receiving connector before your you push the receiver back to the over 3 seconds. If you want to take antenna. computer start-up. transmitter, power will be cut on the power, please click the ID * Increase the separation between 3. For laptop, you may connect the equipment and receiver. down automatically. switch once again. the receiver directly with the * Connect the equipment into an 5. The optical mouse will not work USB connector. freely on a smooth desk ,glass, any outlet on a circuit different from that ID Setup reflecting surface, 3D mouse pad. to which the receiver is connected. 1. Please move the mouse near to 6. when you are moving the mouse, if * Consult the dealer or an the receiver the low-power indication light experienced radio/TV technician 2. Press the ID button of the mouse flickers, it shows that the batteries for help. bottom with some hard and are using up, please change another two new right batteries.


Document Created: 2005-12-28 08:38:24
Document Modified: 2005-12-28 08:38:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC