User Manual

FCC ID: TUVET-9020

Users Manual

Download: PDF
FCCID_3879810

Manual 5 Manual C GorREeeETecH FCC Statement Specification Changes or modifications not expressly approved by the party Bluetooth version: Bluetooth V4.2 responsible for compliance could void the user‘s authority to Support: HFPV1.2, AZDPV1.3, AVRCPV1.4, HSP1.6, operate the equipment. This equipment has been tested and found to comply with the limits GAVDP1.2, IOP for a Class B digital device, pursuant to Part 15 of the FCC Rules. SNR: 96dB SNR stereo ADC and stereo DAC These limits are designed to provide reasonable protection against Sensitivity: —80dBm«<0.1%BER harmful interference in a residential installation. This equipment Transmission distance: 10m generates uses and can radiate radio frequency energy and, if not Frequency: 2.4 —2.480GHZ installed and used in accordance with the Transmission power: CLASS2, 4dbm instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference Audio SNR: 275dB will not occur in a particular installation. If this equipment does Audio performance: SBC decoding cause harmful interference to radio or television reception, which Battery capacity: 3.7V/400mAh Built in rechageable can be determined by turning the equipmentoff and on, the user is Charging voltage: DCSV 250mA lithium battery encouraged to try to correct the interference by one or more of the Charging time: about 2 hours following measures: — Reorient or relocate the receiving antenna. Working currency: 40mA — Increase the separation between the equipment and receiver. Standby currency: <500uA — Connect the equipment into an outlet on a circuit different from Working temperature: ~40°C to +85°C that to which the receiver is connected. Play time: about 9 hours — Consult the dealer or an experienced radio/TV technician for help Working time: about 9 hours This device complieswith part 15 of the FCC rules. Operation is Standby time: about 200 hours subject to the following two conditions {1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been evaluated to meet general RF exposure Quick Start Guide Certificate Eastem Times Technology Go., Lid. requirement. The device can be used in portable exposure of approval Add: Building D,Nan An Industral Aree,Youganpu Model: GFT—BHO7 condition withoutrestriction. Vilage, Fenggang Town,Dongguan Cily, Guangdong,China Bluetooth Headphone Manual Manual Manual Manual 4 Get started Features How to use Re—Palring: Long press »ei| for about 3 seconds in power off mode, headset enter pairing mode when red and blue LED Congratulations! Thank you for choosing GFT—BHOT7 1, Bluetooth 4.2, 10M wireless range 1 ,OPERATION GUIDE Power On: Long press Well for 3 seconds, sound prompt. indicator lights flash quickly. Bluetooth stereo headphone. 2, High—Resolution Audio —— With premium neodymium driver 3, Upgraded Soft Ear Cushions & Gentle Reminder Power Off: Long press Well for 3 seconds, sound prompt. Bluetooth headset will pairing connected device automatically 4, More than "8—hr Battery Life", Both Wireless Freedom when poweron. Answer/Hang up Calls: Single press Wl and Wired Backup Re—dial Last Phone Call: Double press Wl 4 ,Low battery 5, Built—in Mic and Hands—Free Call You will hear a tone" Du Du..." in every minute for remind Play/ Pause Music: Single press )»|| 6, Foldable and Portable design when it is in low battery. Safety Rules Volume +/—: Long press 14(/ p—— Previous/Next Song: Single press | € / p+ 1, Pleasefollow the rules depicted in this manual carefully Notice to ensure your safety. Before using this GFT—BHO7, we 2 ,LED INDICATOR LIGHT 1. Please charge the Bluetooth headset when sound prompt. would strongly encourage you to read through this user manual. Charging: Red light keeps on in charging mode .Blue light 2. The port at the button of headset is for audio input only, 2, Be more care of any edges, uneven surfaces, metal parts, on when fully charged. please DO NOT connect other headphones. accessories and packaging to avoid any possibility of injury. Power on: Blue light keeps on. Kit Contents 3, Do not dismantle, repair and modify product to avoidfire Pairing mode: Red and blue lights flashing alternately. 1. 1 X Stereo Blustooth headphone GFT—BHO7 breaking, electric shocking and product damaging completely, Standby mode: Blue light keeps on. 2. 1 X Charging Micro USB Cable which are not covered under warranty. Palred mode: Blue light keeps on. 3. 1 X User Manual 4, Do not use any diluents or volatile liquid to clean the Rad and blueatain light Play mode: Bluelight flash every 1.5 second. 4. 1 X 3.5mm audio wire GFT—BHO7. 28nm Aujock Miro USB wiot 3,Pairing Warning 5, Do not use the GFT—BHO7 in a hazardous location. Initial Pairing: Bluetooth headset will enter pairing mode 1, You must choose a qualified charger from a regular automatically, sound prompt. Turm on Bluetooth function on manufacturer to charge the headphone. device and select GFT—BHO7, no PIN code needed. Sound 2, You must charge the headphone if it has not been used for prompt when pairing successfully. more than 3 months.


Document Created: 2018-05-14 15:07:37
Document Modified: 2018-05-14 15:07:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC