Reply Letter

FCC ID: TQ4YWGIT-R5678904

Cover Letter(s)

Download: PDF

FCCID_1046027

Reply Letter

1. TEST REPORT: There is no mention that this EUT or Antenna Cable meets the
requirements of FCC Part 15.203. Please submit data on the antenna connectors and
how they comply with FCC Part 15.203.
The device use SMA-N and unique cable connector. Please see the external photo of
EUT.

2. EXTERNAL PHOTOGRAPH: The Back View of this EUT shows two antenna
connectors. One is called RF1 and the other RF2. These two outputs are not obvious
on the Block Diagram and not obvious on the Schematic Diagrams. Please explain what
is RF1 and what is RF2. Thank you.
Please see the revised Block Diagram_Rev1 and Schematic_Rev1. This documents show
RF1 and RF2 port.

3. Maximum Permissible Exposure (MPE) Exhibit. Please submit a MPE RF Exposure
Exhibit shown the distance for RF Exposure compliance. None was received.
Please see the uploaded RF Exposure.

4. ANTENNA GAIN: The Dedicated Antenna has 6 dB Gain. Is this 6 dBi or 6 dBd?
The antenna gain is 6dBi.

5. FCC Part 15.247((b)(4) Please state how this EUT and Antanna meet the rule
as stated in this FCC Part. Thank you.
The EUT max output power is 0.698W (28.44dBm), the FCC Limit is 1 W. And the
antenna gain is 6 dBi <= FCC Limit 6 dBi.

Document Created: 2008-12-08 14:45:14
Document Modified: 2008-12-08 14:45:14

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC