Coverletter Modular Approval Req

FCC ID: TLZ-NU103

Cover Letter(s)

Download: PDF
FCCID_1133307

FCC ID: TLZ-NU103




          Modular Approval Request Letter

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

May 25, 2009



Dear Application Examiner,


AzureWave Technologies, Inc., It’s an 802.11b/g/n WLAN USB module, FCC ID:
TLZ-NU103 would like to have your authorization as a modular approval specific to
the mobile device such as Notebook and portable device (Eee keyboard , Brand
ASUS , Model : Eeekeyboard PC).



The requirements of Public Notice DA00-1407 have been met and shown on the
following statements.

1. “The modular transmitter must have its own RF shielding.”: The radio portion of
   this module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT
   has buffered data inputs, it is integrated in chip RTL8191.

3. “The modular transmitter must have its own power supply regulation.” This
   regulator is embedded in RTL8191.

4. “The modular transmitter must comply with the antenna requirements of section
   15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
   spurious emission, unique antenna connector and photo of antennas are shown
   in the test report.

5. “The modular transmitter must be tested in a stand-alone configuration” The EUT
   was tested in a stand-alone configuration via a mini extender card. Please see
   section Photographs of Test Configuration in the test report, the EUT was
   plugged in this extender.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please
   see exhibition Label Sample for the FCC ID of this module. And also in the
   exhibition Users Manual, there are instructions give to the OEM on how to label
   the end product.

Report No.: RF980423L13


FCC ID: TLZ-NU103



7. “The modular transmitter must comply with any specific rule or operating
   requirements applicable to the transmitter and the manufacturer must provide
   adequate instructions along with the module to explain any such requirements.”
   The EUT is compliant with all applicable FCC rules. Detail instructions for
   maintaining compliance are given in the Users Manual.



8. “The modular transmitter must comply with any applicable RF exposure
   requirements.” The EUT is compliant with all applicable RF exposure
   requirements. RF Exposure is addressed in the RF exposure exhibition.



Please contact me if you have any further questions. Thanks for your attention.




Best Regards,




Gary Chang
Assistant Manager
Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch




Report No.: RF980423L13



Document Created: 2009-05-27 14:10:46
Document Modified: 2009-05-27 14:10:46

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC