(AW-NB086) TestRpt-SAR-part 2

FCC ID: TLZ-NB086

RF Exposure Info

Download: PDF
FCCID_1559048

Appendix D. Probe Calibration Data Object: EX3DV4- SN 3698

\41 gs/ Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client ;Certlfic:ate No":‘k EX3—3698_Jul11 . CALIBRATION CERTIFICATE __________________________________ Object > (Exspva—SN:3698. Calibration procedure(s) Calibration date: f'J'uIy‘28\72()11 D00 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S)). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environmenttemperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date (Cerfificate No.) Scheduted Calibration Power meter E44198 GB41293874 31—Mar—11 (No. 217—01372) Apr—12 Power sensor E4412A MY41498087 31—Mar—11 (No. 217—01372) Apr—12 Reference 3 dB Attenuator SN: $5054 (3c) 29—Mar—11 (No. 217—01369) Apr—12 Reference 20 dB Attenuator SN: 85086 (20b) 29—Mar—11 (No. 217—01367) Apr—12 Reference 30 dB Attenuator SN: 85129 (30b) 29—Mar—11 (No. 217—01370) Apr—12 Reference Probe ESSDV2 SN: 3013 29—Dec—10 (No. ES3—3013_Deci0) Dec—11 DAE4 SN: 654 3—May—11 (No. DAE4—654_May11) May—12 Secondary Standards ID Check Date (in house) Scheduled Check RF generator HP 8648C US3642U01700 4—Aug—99 (in house check Oct—09) In house check: Oct—11 Network Analyzer HP 8753E US37300585 18—Oct—01 (in house check Oct—10) In house check: Oct—11 . Name Functiqn Signature Calibrated by: ‘KellaPokovie _ ____ Technical Manager _ > Approved by: : Niels Kuster _ @uality Manager Issued: July 28, 2011 This calibration certificate shall not be reproduced except in full withoutwritten approvalof the laboratory. Certificate No: EX3—3698_Jul11 Page 1 of 11

Calibration Laboratory of S Schweizerischer Kalibrierdienst Schmid & Partner C Service suisse d‘étalonnage Engineering AG 3 Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMx.y,z sensitivity in free space ConvF sensitivity in TSL / NORMx.y,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B, C modulation dependent linearization parameters Polarization o i rotation around probe axis Polarization 8 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), Le., 8 = 0 is normal to probe axis Calibration is Performed According to the Following Standards: a) [EEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) —JEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 Methods Applied and Interpretation of Parameters: * NORMx,y,z: Assessed for E—field polarization 8 = 0 (f < 900 MHz in TEM—cell; > 1800 MHz: R22 waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,.y,z does not affect the E—field uncertainty inside TSL (see below ConvF). * NORM(Mx,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. «_ DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. * PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics e Axsy.z Bxy.z Cxy,2, VRxy,z: A, B, C are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. & ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty valuesare given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from + 50 MHz to + 100 MHz. * Sphericalisotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. * Sensor Offset; The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. Certificate No: EX3—3698_Jul11 Page 2 of 11

EX3DV4 — SN:3698 July 28, 2011 Probe EX3DV4 SN:3698 Manufactured: April 22, 2009 Calibrated: July 28, 2011 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certificate No: EX3—3698_JuT11 Page 3 of 11

EX3DV4— SN:3698 July 28, 2011 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3698 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Une (k=2) Norm (uV/(V/im))" 0.51 0.44 0.45 £10.1 % DCP (mV)" 99.1 98.8 101.0 Modulation Calibration Parameters UID Communication System Name PAR A B C VR Unc® dB dB dB mV (k=2) 10000 Cw o.00 x 0.00 0.00 1.00 1152 125% v |_0.00 0.00 1.00 105.0 z2 0.00 0.00 1.00 1081 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. * The uncertainties of NormX,Y,2Z do not affect the E*—field uncertainty inside TSl. (see Pages 5 and 6). ° Numerical linearization parameter: uncertainty not required. & Uncertainty is determined using the max.deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: EX3—3698_Jul1 1 Page 4 of 11

EX3DV4— SN:3698 July 28, 2011 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3698 Calibration Parameter Determined in Head Tissue Simulating Media Relative Conductivity Depth Unct. f(MHz)® Permittivity" (§/m)" ConvFX ConyFY| ConvFZ Alpha _(mm) (k=2) 750 41.9 0.89 8.77 8.77 8.77 0.80 0.67 +12.0% 835 41.5 0.90 8.40 8.40 8.40 0.69 0.74 £12.0% 900 41.5 0.97 8.29 8.29 8.29 0.64 0.76 +12.0 % 1750 40.1 1.37 7.38 7.38 7.38 0.80 0.60 +12.0 % 1900 40.0 1.40 7.18 718 7.18 9.80 0.60 £12.0 % 2450 39.2 1.80 6.51 6.51 6.51 0.80 0.61 *12.0% 2600 39.0 1.98 6.39 6.39 6.39 0.74 0.63 #12.0 % 3500 37.9 2.91 8.41 6.41 6.41 0.20 1.60 £13.1 % 5200 36.0 4.66 4.80 4.80 4.80 0.35 1.80 £13.1 % 5300 35.9 4.76 4.58 4.58 4.58 0.35 1.80 £#13.1 % 5500 35.6 4.96 4.48 4.48 4.48 0.40 1.80 £13.1% 5600 35.5 5.07 4.16 4.16 4.16 0.45 1.80 #13.1% 5800 35.3 5.27 4.22 4.22 4.22 0.45 1.80 #13.1 % © Frequency validity of £ 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to 4 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. " At frequencies below 3 GHz, the validity of tissue parameters (e and a) can be relaxed to £ 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (s and 0) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. Certificate No: EX3—3698_Jul1 1 Page 5 of 11

EX3DV4— SN:3698 July 28, 2011 DASY/EASY — Parameters of Probe: EX3DV4— SN:3698 Calibration Parameter Determined in Body Tissue Simulating Media Relative Conductivity Depth Unct. f(MHz)° Permittivity" (S/m)" ConvFX ConvFY ConvFZ Alpha ({mm} (k=2) 750 55.5 0.96 8.56 8.56 8.56 0.80 0.71 £12.0 % 836 55.2 0.97 8.59 8.59 8.59 0.80 0.68 +12.0 % 900 55.0 1.05 8.31 8.31 8.31 0.74 0.75 £12.0% 1750 53.4 149 7.09 7.09 7.09 0.80 0.68 £#12.0 % 1900 53.3 1.52 6.74 6.74 6.74 0.80 0.65 £12.0 % 2450 52.7 1.95 6.60 6.60 6.60 0.80 0.60 £12.0 % 2600 52.5 216 6.40 6.40 6.40 0.80 0.50 £12.0 % 3500 51.3 3.31 5.73 5.73 5.73 0.23 1.90 #13.1% 5200 49.0 5.30 3.95 3.95 3.95 0.55 1.90 #13.1% 5300 48.9 5.42 3.74 3.74 3.74 0.55 1.90 £13.1% 5500 48.6 5.65 3.68 3.68 3.68 0.50 1.90 £13.1% 5600 48.5 5.77 3.42 342 3.42 0.60 1.90 £13.1% 5800 48.2 6.00 3.74 3.74 3.74 0.60 1.90 £13.1% © Frequency validity of £ 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConyF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. " At frequencies below 3 GHz, the validity of tissue parameters (e and 0) can be relaxed to £ 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, thevalidity of tissue parameters (s and 0) is restricted to + 5%. The uncertainty is the RSS of the Convr uncertainty for indicated target tissue parameters. Certificate No: EX3—3698_Jul1 1 Page 6 of 11

EX3DV4— SN:3698 July 28, 2011 Frequency Response of E—Field (TEM—Cell:ifi110 EXX, Waveguide: R22) Frequency response (normalized) 05 Lob ob lb hob ob hb uh ob pab fu I I 1500 2000 2500 &— & o & —s o S (a) f [MHz] m © 4 — NJ bs Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) Certificate No: EX3—3698_Jul11 Page 7 of 11

EX3DV4— SN:3698 July 28, 2011 Receiving Pattern (¢), 8 = 0° f=600 MHz,TEM f=1800 MHz,R22 I_ 1L_i_a ~15o -160 Roll [] 10%%]}42 60%2 181)’(?: Hz ZS%HZ Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: EX3—3698_Jul11 Page 8 of 11

EX3DV4— SN:3698 July 28, 2011 Dynamic Range f(SARpeaq) (TEM cell , £= 900 MHz) 108 105 10% 3 3. C .9 10%: ® 5 a £ 102 10 100 i_1 : i_10 : 10100 : 102 107 10 10‘ 10 SAR [mW/icm3] [€] C+] X compensated X not compensated Y compensated Ce] L4 Y not compensated Z compensated Z not compensated 2 a 1 2. § 0 io 3 PilP} i 102 101 109 101 102 _ SAR [{mW/cm3] Ce] [¥] X compensated X not compensated Y compensated & [# Y not compensated Z compensated Z not compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EX3—3698_Jult 1 Page 9 of 11

EX3DV4— SN:3698 July 28, 2011 Conversion Factor Assessment f= 835 MHz,WGLS R9 (H_convF) f= 1900 MHz,WGLS R22 (H_convF) seR migaw sar ighy Real meisired anaytical measized Deviation from Isotropy in Liquid Error (¢, 8), f = 900 MHz Deviation —1.0 —0.8 —0.6 —0.4 —0.2 00 02 04 0.6 08 1.0 Uncertainty of Spherical Isotropy Assessment: £ 2.6% (k=2) Certificate No: EX3—3698_Jul11 Page 10 of 11

EX3DV4—— SN:3698 July 28, 2011 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3698 Other Probe Parameters Sensor Arrangement Triangular Connector Angle (°) Not applicable Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 9 mm Tip Diameter 2.5 mm Probe Tip to Sensor X Calibration Point 1 mm Probe Tip to Sensor Y Calibration Point 1 mm Probe Tip to Sensor Z Calibration Point 1 mm Recommended Measurement Distance from Surface 2 mm Certificate No: EX3—3698_Jul11 Page 11 of 11

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client Quietek (Auden) Certificate No: D2450V2—839_Mar10 CALIBRATION CERTIF] CATE Object D2450V2 — SN: 839 Calibration procedure(s} QA CAL—O5.v7 Calibration procedure for dipole validation kits Calibration date: March 12, 2010 This calibration certificate documents the traceability to nationalstandards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A @B37480704 06—Oct—09 (No. 217—01086) Oct—10 Power sensor HP 8481A Uss7292783 06—Oct—09 (No. 217—01086) Oct—10 Reference 20 dB Attenuator SN: 5086 (209) 31—Mar—09 (No. 217—01025) Mar—10 Type—N mismatch combination SN: 5047.2 / 06827 31—Mar—09 (No. 217—01029) Mar—10 Reference Probe ESSDV3 SN: 3205 26—Jun—09 (No. ES3—3205_Jun09) Jun—10 DAE4 SN: 601 02—Mar—10 (No. DAE4—601_Mar10) Mar—11 Secondary Standards ID # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—Oct—02 (in house check Oct—09) In house check: Oct—11 RF generator R&S SMT—06 100005 4—Aug—99 (in house check Oct—09) In house check: Oct—11 Network Analyzer HP 8753E US37390585 $4206 18—Oct—01 (in house check Oct—08) In house check: Oct—10 Name Function _ Signature Calibrated by: Mike Meili Laboratory Technician * {)\@\\'\ Approved by: KatJa Pokovic Technical Manager Issued: March 18, 2010 This calibration certificate shall not be reproduced exceptin full without written approval of the laboratory. Certificate No: D2450V2—839_Mar10 Page 1 of 9

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. «_ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: D2450V2—839_Mar10 Page 2 of 9

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS V5.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V4.9 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz +1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 40.4 + 6 % 1.80 mho/m + 6 % Head TSL temperature during test (21.0 £0.2) °C ———— aseo SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 13.0 mW /g SAR normalized normalized to 1W 52.0 mW /g SAR for nominal Head TSL parameters normalized to 1W 52.3 mW /g + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.11 mW /g SAR normalized normalized to 1W 24.4 mW / g SAR for nominal Head TSL parameters normalized to 1W 24.5 mW ig * 16.5 % (k=2) Certificate No: D2450V2—839_Mar10 Page 3 of 9

Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 54.4 2 6 % 2.00 mho/m + 6 % Body TSL temperature during test (21.0 + 0.2) °C SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 13.0 mWw /g SAR normalized normalized to 1W 52.0 mWw /g SAR for nominal Body TSL parameters normalized to 1W 51.6 mW / g + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 6.06 mW /g SAR normalized normalized to 1W 24.2 mW / g SAR for nominal Body TSL parameters normalized to 1W 24.2 mW / g + 16.5 % (k=2) Certificate No: D2450V2—839_Mar10 Page 4 of 9

Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 53.5 Q — 0.6 jQ Return Loss —29.4 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 50.0 Q + 0.9 jQ Return Loss ~40.8 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.134 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on July 20, 2009 Certificate No: D2450V2—839_Mar10 Page 5 of 9

DASY5 Validation Report for Head TSL Date/Time: 12.03.2010 13:24:52 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:839 Communication System: CW; Frequency: 2450 MHz; Duty Cycle: 1: 1 Medium: HSL U11 BB Medium parameters used: £= 2450 MHz; 0 = 1.81 mho/m; &, = 40.5; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI €63.19—2007) DASY5 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.53, 4.53, 4.53); Calibrated: 26.06.2009 Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 02.03.2010 Phantom: Flat Phantom 5.0 (front); Type: QDOOOP50AA; Serial: 1001 e Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Head/d=10mm, Pin=250 mW, dist=3.0mm (ES—Probe)/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=Smm, dy=5mm, dz=5mm Reference Value = 99.1 V/m; Power Drift = 0.060 dB Peak SAR (extrapolated) = 26.5 W/kg SAR(I g) = 13 mW/g; SAR(10 g) = 6.11 mW/g Maximum value of SAR (measured) = 16.5 mW/g 8 0 43.2 417.6 22 0 dB = 16.5mW/g Certificate No: D2450V2—839_Mar10 Page 6 of 9

Impedance Measurement Plot for Head TSL 12 Mar 2010 i3:04:41 E8@ sn a w rs 1: 59.467 a —558.59 ma 11.6.29 pF 2450.000 000 MHz Del Ca fAve 16 CH2 Ca Av 16° CENTER 2 450.000 000 MHz SPAN 400.000 000 MHz Certificate No: D2450V2—839_Mar10 Page 7 of 9

DASY5 Validation Report for Body Date/Time: 12.03.2010 15:25:35 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:839 Communication System: CW; Frequency: 2450 MHz; Duty Cycle: 1:1 Medium: MSL U1O BB Medium parameters used: £ = 2450 MHz; 0 = 2.01 mho/m; & = 54.5; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI C63.19—2007) DASY5 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.31, 4.31, 4.31); Calibrated: 26.06.2009 Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 02.03.2010 Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002 Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Body/d=10mm, Pin250 mW, dist=3.0mm (ES—Probe)/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 94.9 V/m; Power Drift = —0.0047 dB Peak SAR (extrapolated) = 27.1 W/kg SAR(I g) = 13 mW/g; SAR(10 g) = 6.06 mW/g Maximum value of SAR (measured) = 17.2 mW/g 0 dB = 17.2mW/g Certificate No: D2450V2—839_Mar10 Page 8 of 9

Impedance Measurement Plot for Body TSL 12 Mar 2010 13:05:23 CHT sii 1 U Fs 1: 50.007 a ©.9102 0 59.125 pH 2490.000 00A MHz fAvg 16 CH2 Ca Ay 16° CENTER 2 450.000 @09 MHz SPAN 400.000 900 MHz Certificate No: D2450V2—839_Mar1O Page 9 of 9


Document Created: 2011-09-29 16:54:54
Document Modified: 2011-09-29 16:54:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC