(AW-NB086) TestRpt_WLAN_Part 1-1

FCC ID: TLZ-NB086

Test Report

Download: PDF
FCCID_1527545

                                                                           Report No. 118059R-RFUSP42V01




                                       Test Report


       Product Name IEEE 802.11b/g/n WIFI/ BT Combo slim module
       Model No     AW-NB086
       FCC ID.      TLZ-NB086




      Applicant Azurewave Technologies. Inc.
      Address         8F.,No.94, Baozhong Rd.,Xiandian,Taipei,Taiwan 231




                          Date of Receipt        July 28, 2011

                          Issue Date             Aug. 11, 2011

                          Report No.             118059R-RFUSP42V01

                          Report Version         V1.0




The test results relate only to the samples tested.
The test report shall not be reproduced except in full without the written approval of QuieTek Corporation.
This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government




                                           Page : 1 of 112


                                                                                  Report No. 118059R-RFUSP42V01




                             Tes t R ep o rt C er ti fi c at i o n
                                                                          Issue Date: Aug. 11, 2011
                                                                          Report No.: 118059R-RFUSP42V01




                                             Accredited by NIST (NVLAP)
                                               NVLAP Lab Code: 200533-0

     Product Name                  IEEE 802.11b/g/n WIFI/ BT Combo slim module
     Applicant                     Azurewave Technologies. Inc.
     Address                       8F.,No.94, Baozhong Rd.,Xiandian,Taipei,Taiwan 231
     Manufacturer                  Azurewave Technologies. Inc.
     Model No.                     AW-NB086
     FCC ID.                       TLZ-NB086
     EUT Rated Voltage             DC 3.3V
     EUT Test Voltage              AC 120V/60Hz
     Trade Name
     Applicable Standard           FCC CFR Title 47 Part 15 Subpart C: 2010
                                   ANSI C63.4: 2009
     Test Result                   Complied

The test results relate only to the samples tested.
The test report shall not be reproduced except in full without the written approval of QuieTek Corporation.
This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government


   Documented By :


                             ( Senior Adm. Specialist / Rita Huang )

   Tested By             :


                                   ( Engineer / Sabrina Tsai )

   Approved By           :


                                    ( Manager / Vincent Lin )




                                                  Page : 2 of 112


                                                                                                           Report No. 118059R-RFUSP42V01



                                              TA B L E O F C O N T E N T S
       Description                                                                                                                                Page
1.             GENERAL INFORMATION .....................................................................................................5
1.1.           EUT Description............................................................................................................................5
1.2.           Operational Description ................................................................................................................7
1.3.           Tested System Details....................................................................................................................8
1.4.           Configuration of Tested System ....................................................................................................8
1.5.           EUT Exercise Software .................................................................................................................8
1.6.           Test Facility ...................................................................................................................................9
2.             Conducted Emission..................................................................................................................10
2.1.           Test Equipment............................................................................................................................10
2.2.           Test Setup ....................................................................................................................................10
2.3.           Limits ..........................................................................................................................................11
2.4.           Test Procedure .............................................................................................................................11
2.5.           Uncertainty ..................................................................................................................................11
2.6.           Test Result of Conducted Emission.............................................................................................12
3.             Peak Power Output ...................................................................................................................14
3.1.           Test Equipment............................................................................................................................14
3.2.           Test Setup ....................................................................................................................................14
3.3.           Limits ..........................................................................................................................................14
3.4.           Test Procedure .............................................................................................................................14
3.5.           Uncertainty ..................................................................................................................................14
3.6.           Test Result of Peak Power Output...............................................................................................15
4.             Radiated Emission.....................................................................................................................19
4.1.           Test Equipment............................................................................................................................19
4.2.           Test Setup ....................................................................................................................................20
4.3.           Limits ..........................................................................................................................................21
4.4.           Test Procedure .............................................................................................................................22
4.5.           Uncertainty ..................................................................................................................................22
4.6.           Test Result of Radiated Emission................................................................................................23
5.             RF antenna conducted test........................................................................................................39
5.1.           Test Equipment............................................................................................................................39
5.2.           Test Setup ....................................................................................................................................39
5.3.           Limits ..........................................................................................................................................39
5.4.           Test Procedure .............................................................................................................................39
5.5.           Uncertainty ..................................................................................................................................40
5.6.           Test Result of RF antenna conducted test....................................................................................41
6.             Band Edge ..................................................................................................................................65
6.1.           Test Equipment............................................................................................................................65
6.2.           Test Setup ....................................................................................................................................66
6.3.           Limits ..........................................................................................................................................66
6.4.           Test Procedure .............................................................................................................................67
6.5.           Uncertainty ..................................................................................................................................67
6.6.           Test Result of Band Edge ............................................................................................................68

                                                              Page : 3 of 112


                                                                                                            Report No. 118059R-RFUSP42V01

7.              Occupied Bandwidth.................................................................................................................84
7.1.            Test Equipment............................................................................................................................84
7.2.            Test Setup ....................................................................................................................................84
7.3.            Limits ..........................................................................................................................................84
7.4.            Test Procedure .............................................................................................................................84
7.5.            Uncertainty ..................................................................................................................................84
7.6.            Test Result of Occupied Bandwidth ............................................................................................85
8.              Power Density ............................................................................................................................97
8.1.            Test Equipment............................................................................................................................97
8.2.            Test Setup ....................................................................................................................................97
8.3.            Limits ..........................................................................................................................................97
8.4.            Test Procedure .............................................................................................................................97
8.5.            Uncertainty ..................................................................................................................................97
8.6.            Test Result of Power Density ......................................................................................................98
9.              EMI Reduction Method During Compliance Testing ..........................................................110

Attachment 1:   EUT Test Photographs
Attachment 2:   EUT Detailed Photographs




                                                               Page : 4 of 112


                                                                               Report No. 118059R-RFUSP42V01




1.           GENERAL INFORMATION

1.1.         EUT Description

     Product Name              IEEE 802.11b/g/n WIFI/ BT Combo slim module
     Trade Name
     Model No.                 AW-NB086
     FCC ID.                   TLZ-NB086
     Frequency Range           2412-2462MHz for 802.11b/g/n-20BW, 2422-2452MHz for 802.11n-40BW
     Number of Channels        802.11b/g/n-20MHz: 11, n-40MHz: 7
     Data Speed                802.11b: 1-11Mbps, 802.11g: 6-54Mbps, 802.11n: up to 150Mbps
     Type of Modulation        802.11b:DSSS (DBPSK, DQPSK, CCK)
                               802.11g/n:OFDM (BPSK, QPSK, 16QAM, 64QAM)
     Antenna Type              PIFA Antenna
     Antenna Gain              Refer to the table “Antenna List”
     Channel Control           Auto


     Antenna List
     No. Manufacturer          Part No.                       Antenna Type         Peak Gain
     1. INPAQ                  WA-M-LA-03-007                 PIFA Antenna         3.59 dBi for 2.4 GHz
     2. ACON                   APP6P-700597                   PIFA Antenna         2.92 dBi for 2.4 GHz
     3. ACON                   APP6P-700598                   PIFA Antenna         2.39 dBi for 2.4 GHz
     4. INPAQ                  WA-F-LA-04-001                 PIFA Antenna         3.38 dBi for 2.4 GHz
     5. INPAQ                  WA-F-LA-04-002                 PIFA Antenna         3.22 dBi for 2.4 GHz
     Note:
     1. The antenna of EUT is conform to FCC 15.203.
     2. Only the higher gain antenna was tested and recorded in this report.




                                                 Page : 5 of 112


                                                                             Report No. 118059R-RFUSP42V01



802.11b/g/n-20MHz Center Frequency of Each Channel:
  Channel     Frequency    Channel     Frequency    Channel Frequency Channel Frequency
Channel 01: 2412 MHz Channel 02: 2417 MHz Channel 03: 2422 MHz Channel 04: 2427 MHz
Channel 05: 2432 MHz Channel 06: 2437 MHz Channel 07: 2442 MHz Channel 08: 2447 MHz
Channel 09: 2452 MHz Channel 10: 2457 MHz Channel 11: 2462 MHz

802.11n-40MHz Center Frequency of Each Channel:
  Channel    Frequency     Channel     Frequency Channel Frequency Channel  Frequency
Channel 01: 2422 MHz Channel 02: 2427 MHz Channel 03: 2432 MHz Channel 04: 2437 MHz
Channel 05: 2442 MHz Channel 06: 2447 MHz Channel 07: 2452 MHz



Note:
        1. The EUT is an IEEE 802.11b/g/n WIFI/ BT Combo slim module with a built-in 2.4GHz
           WLAN transceiver.
        2. Regarding to the operation frequency, the lowest, middle and highest frequency are selected to
           perform the test.
        3. Lowest and highest data rates are tested in each mode. Only worst case is shown in the report.
           (802.11b is 1Mbps     802.11g is 6Mbps 802.11n(20M-BW) is 7.2Mbps and
           802.11n(40M-BW) is 15Mbps)
        4. These tests are conducted on a sample for the purpose of demonstrating compliance of
           802.11b/g/n transmitter with Part 15 Subpart C Paragraph 15.247 of spread spectrum devices.




                                                Page : 6 of 112


                                                                             Report No. 118059R-RFUSP42V01




1.2.      Operational Description

                 The EUT is an IEEE 802.11b/g/n WIFI/ BT Combo slim module, This device provided four
           kinds of transmitting speed 1, 2, 5.5 and 11Mbps and the device of RF carrier is DBPSK, DQPSK and
           CCK (IEEE 802.11b). The device provided of eight kinds of transmitting speed 6, 9, 12, 18, 24, 36, 48
           and 54Mbps the device of RF carrier is BPSK, QPSK, 16QAM and 64QAM (IEEE 802.11g).
                 The device provided of eight kinds of transmitting speed 7.2,14.4,21.7,28.9,43.3,57.8,65 and
           72.2Mbps in 802.11n(20M-BW) mode and 15,30,45,60,90,120,135 and 150Mbps(40M-BW) the
           device of RF carrier is BPSK, QPSK, 16QAM and 64QAM (IEEE 802.11n), The IEEE 802.11n is
           Multiple In, Single Out” (MISO) technology and one antennas to support 1(Transmit) * 2(Receive)
           MISO technology.


                 This IEEE 802.11b/g/n WIFI/ BT Combo slim module, compliant with IEEE 802.11b and IEEE
           802.11g/n, is a high-efficiency Wireless LAN adapter. It allows your computer to connect to a
           wireless network and to share resources, such as files or printers without being bound to the network
           wires. Operation in 2.4GHz Direst Sequence Spread Spectrum (DSSS) and Orthogonal Frequency
           Division Multiplexing (OFDM) radio transmission, the IEEE 802.11b/g/n WIFI/ BT Combo         slim
           module Wired Equivalent Protection (WEP) algorithm is used. In addition, its standard compliance
           ensures that it can communicate with any IEEE 802.11b and IEEE 802.11g/n network.


                 The Main antenna is for WLAN with TX/RX mode, the Aux antenna is for WLAN RX mode
           and BT TX/RX function.




       Test Mode:           Mode 1: Transmit (802.11b 1Mbps)
                            Mode 2: Transmit (802.11g 6Mbps)
                            Mode 3: Transmit (802.11n MCS0 7.2Mbps 20M-BW)
                            Mode 4: Transmit (802.11n MCS0 15Mbps 40M-BW)




                                                Page : 7 of 112


                                                                                Report No. 118059R-RFUSP42V01




1.3.     Tested System Details

         The types for all equipment, plus descriptions of all cables used in the tested system (including
         inserted cards) are:

            Product              Manufacturer   Model No.               Serial No.               Power Cord
1      Notebook PC              Lenovo        2767                  L3AZW4N                 Non-Shielded, 1.8m
2      Test Fixture             Azurewave     N/A                   N/A                     N/A


Signal Cable Type                                Signal cable Description
N/A                                              N/A

1.4.     Configuration of Tested System




1.5.     EUT Exercise Software

        (1)   Setup the EUT and peripherals as shown in Section 1.4
        (2)   Execute “ART2 (Ver2.2)” on the Notebook.
        (3)   Configure the test mode, the test channel, and the data rate to start the continuous transmit
        (4)   Verify that the EUT works properly.




                                                  Page : 8 of 112


                                                                                Report No. 118059R-RFUSP42V01




1.6.    Test Facility

        Ambient conditions in the laboratory:
                     Items                     Required (IEC 68-1)                     Actual
        Temperature (°C)                 15-35                            20-35
        Humidity (%RH)                   25-75                            50-65
        Barometric pressure (mbar)       860-1060                         950-1000

         The related certificate for our laboratories about the test site and management system can be downloaded from
         QuieTek Corporation’s Web Site: http://www.quietek.com/tw/ctg/cts/accreditations.htm
         The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site:
          http://www.quietek.com/

        Site Description:     File on
                              Federal Communications Commission
                              FCC Engineering Laboratory
                              7435 Oakland Mills Road
                              Columbia, MD 21046
                              Registration Number: 92195

                              Accreditation on NVLAP
                              NVLAP Lab Code: 200533-0

        Site Name:            Quietek Corporation
        Site Address:         No.5-22, Ruishukeng,
                              Linkou Dist. New Taipei City 24451,
                              Taiwan, R.O.C.
                              TEL: 886-2-8601-3788 / FAX : 886-2-8601-3789
                              E-Mail : service@quietek.com


       FCC Accreditation Number: TW1014




                                                  Page: 9 of 112


                                                                              Report No. 118059R-RFUSP42V01




2.     Conducted Emission

2.1.   Test Equipment

       The following test equipment are used during the conducted emission test:

       Item Instrument                  Manufacturer     Type No./Serial No      Last Cal.       Remark
       1     Test Receiver              R&S              ESCS 30/825442/17       May, 2011
       2     L.I.S.N.                   R&S              ESH3-Z5/825016/6        May, 2011       EUT
       3     L.I.S.N.                   Kyoritsu         KNW-407/8-1420-3        May, 2011       Peripherals
       4     Pulse Limiter              R&S              ESH3-Z2                 May, 2011
       5     No.1 Shielded Room                                                  N/A
       Note: All instruments are calibrated every one year.



2.2.   Test Setup
                                                                              Reference Plane


                        Test Receiver
                                                                                                40cm


                    12dBuV                                                    EUT
                                                                  Load
                    




                                                       LISN                                     LISN


                                                                                 LISN
                                        Ground Plane




                                                   Page: 10 of 112


                                                                        Report No. 118059R-RFUSP42V01




2.3.   Limits

                       FCC Part 15 Subpart C Paragraph 15.207 (dBuV) Limit

                        Frequency                             Limits

                           MHz
                                                     QP                  AVG

                        0.15 - 0.50              66-56                   56-46

                         0.50-5.0                    56                   46

                         5.0 - 30                    60                   50


2.4.   Test Procedure

       The EUT and simulators are connected to the main power through a line impedance stabilization
       network (L.I.S.N.). This provides a 50 ohm /50uH coupling impedance for the measuring
       equipment. The peripheral devices are also connected to the main power through a LISN that
       provides a 50ohm /50uH coupling impedance with 50ohm termination. (Please refers to the block
       diagram of the test setup and photographs.)
       Both sides of A.C. line are checked for maximum conducted interference. In order to find the
       maximum emission, the relative positions of equipment and all of the interface cables must be
       changed according to ANSI C63.4: 2009 on conducted measurement.
       Conducted emissions were invested over the frequency range from 0.15MHz to 30MHz using a
       receiver bandwidth of 9kHz.



2.5.   Uncertainty

         2.26 dB




                                            Page: 11 of 112


                                                                            Report No. 118059R-RFUSP42V01




2.6.       Test Result of Conducted Emission

           Product        :       IEEE 802.11b/g/n WIFI/ BT Combo slim module
           Test Item      :       Conducted Emission Test
           Power Line     :       Line 1
           Test Mode      :       Mode 4: Transmit (802.11n MCS0 15Mbps 40M-BW) (2437MHz)


       Frequency          Correct            Reading         Measurement        Margin           Limit
                              Factor          Level                Level
         MHz                   dB             dBuV                 dBuV           dB             dBuV
        Line 1
   Quasi-Peak
         0.154                9.760          36.180                45.941       -19.945          65.886
         0.209                9.701          30.360                40.061       -24.253          64.314
         0.310                9.650          31.740                41.390       -20.039          61.429
         0.408                9.647          31.340                40.987       -17.642          58.629
         0.697                9.630          25.100                34.730       -21.270          56.000
        16.021                9.991          21.640                31.631       -28.369          60.000
       Average
         0.154                9.760          18.770                28.531       -27.355          55.886
         0.209                9.701          18.520                28.221       -26.093          54.314
         0.310                9.650          20.740                30.390       -21.039          51.429
         0.408                9.647          20.340                29.987       -18.642          48.629
         0.697                9.630          17.680                27.310       -18.690          46.000
        16.021                9.991          15.040                25.031       -24.969          50.000


Note:
        1. All Reading Levels are Quasi-Peak and average value.
        2. “     “ means the worst emission level.
        3. Measurement Level = Reading Level + Correct Factor




                                                 Page: 12 of 112


                                                                            Report No. 118059R-RFUSP42V01



           Product        :       IEEE 802.11b/g/n WIFI/ BT Combo slim module
           Test Item      :       Conducted Emission Test
           Power Line     :       Line 2
           Test Mode      :       Mode 4: Transmit (802.11n MCS0 15Mbps 40M-BW) (2437MHz)


   Frequency              Correct            Reading         Measurement        Margin           Limit
                              Factor          Level                Level
        MHz                    dB             dBuV                 dBuV           dB             dBuV
        Line 2
  Quasi-Peak
        0.170                 9.743          33.160                42.903       -22.526          65.429
        0.279                 9.667          34.000                43.667       -18.647          62.314
        0.345                 9.658          26.400                36.058       -24.371          60.429
        0.466                 9.640          25.520                35.160       -21.811          56.971
        0.697                 9.650          24.120                33.770       -22.230          56.000
        17.650             10.010            21.080                31.090       -28.910          60.000
    Average
        0.170                 9.743          14.110                23.853       -31.576          55.429
        0.279                 9.667          20.610                30.277       -22.037          52.314
        0.345                 9.658           8.300                17.958       -32.471          50.429
        0.466                 9.640          12.410                22.050       -24.921          46.971
        0.697                 9.650          15.410                25.060       -20.940          46.000
        17.650             10.010            14.450                24.460       -25.540          50.000


Note:
    1. All Reading Levels are Quasi-Peak and average value.
    2. “         “ means the worst emission level.
    3. Measurement Level = Reading Level + Correct Factor




                                                 Page: 13 of 112


                                                                            Report No. 118059R-RFUSP42V01




3.     Peak Power Output

3.1.   Test Equipment

                 Equipment             Manufacturer          Model No./Serial No.           Last Cal.
       X          Power Meter             Anritsu          ML2495A/6K00003357              May, 2011
       X         Power Sensor             Anritsu            MA2411B/0738448                Jun, 2011
       Note:
       1.       All equipments are calibrated with traceable calibrations. Each calibration is traceable to the
                national or international standards.
       2.       The test instruments marked with “X” are used to measure the final test results.




3.2.   Test Setup

       Conducted Measurement




                       EUT                                       RF Cable                   Power
                                                                                             Meter
                                         SMA




3.3.   Limits

       The maximum peak power shall be less 1 Watt.



3.4.   Test Procedure

       The EUT was tested according to DTS test procedure of Mar. 2005 KDB558074 for compliance to
       FCC 47CFR 15.247 requirements.



3.5.   Uncertainty

            1.27 dB




                                               Page: 14 of 112


                                                                            Report No. 118059R-RFUSP42V01




3.6.        Test Result of Peak Power Output

            Product        :   IEEE 802.11b/g/n WIFI/ BT Combo slim module
            Test Item      :   Peak Power Output Data
            Test Site      :   No.3 OATS
            Test Mode      :   Mode 1: Transmit (802.11b 1Mbps)



                                         Average Power                    Peak
                 Frequency        For different Data Rate (Mbps)          Power     Required
Channel No                                                                                        Result
                   (MHz)         1         2          5.5          11       1         Limit
                                         Measurement Level (dBm)

       01           2412       15.01       --         --            --    17.21     <30dBm        Pass

       06           2437       15.24     15.23      15.23          15.2   17.37     <30dBm        Pass

       11           2462       15.46       --         --            --    17.61     <30dBm        Pass
Note:       Peak Power Output Value =Reading value on peak power meter + cable loss




                                                 Page: 15 of 112


                                                                                 Report No. 118059R-RFUSP42V01




         Product         :        IEEE 802.11b/g/n WIFI/ BT Combo slim module
         Test Item       :        Peak Power Output Data
         Test Site       :        No.3 OATS
         Test Mode       :        Mode 2: Transmit (802.11g 6Mbps)


                                                   Average Power                         Peak
                                           For different Data Rate (Mbps)               Power
             Frequency                                                                           Required
Channel No                                                                                                  Result
               (MHz)          6       9       12     18     24        36    48    54      6       Limit

                                                   Measurement Level (dBm)

    01         2412          14.93    --      --      --     --       --    --    --     21.92   <30dBm     Pass

    06         2437          16.26 16.23 16.23 16.2 16.18 16.14 16.14 16.13              22.66   <30dBm     Pass

    11         2462          14.64    --      --      --     --       --    --    --     21.35   <30dBm     Pass
Note:    Peak Power Output Value =Reading value on peak power meter + cable loss




                                                    Page: 16 of 112


                                                                                    Report No. 118059R-RFUSP42V01



         Product         :      IEEE 802.11b/g/n WIFI/ BT Combo slim module
         Test Item       :      Peak Power Output Data
         Test Site       :      No.3 OATS
         Test Mode       :      Mode 3: Transmit (802.11n MCS0 7.2Mbps 20M-BW)



                                                     Average Power                          Peak
                                            For different Data Rate (Mbps)                 Power
             Frequency                                                                              Required
Channel No                                                                                                     Result
               (MHz)          7.2    14.4     21.7     28.9   43.3      57.8   65   72.2     7.2     Limit

                                                     Measurement Level (dBm)

    01         2412          14.42    --       --       --     --        --    --    --     21.55   <30dBm     Pass

    06         2437          15.32 15.31 15.28 15.27 15.24 15.24 15.22 15.2                 21.86   <30dBm     Pass

    11         2462          13.92    --       --       --     --        --    --    --     20.96   <30dBm     Pass
Note:    Peak Power Output Value =Reading value on peak power meter + cable loss




                                                      Page: 17 of 112


                                                                                 Report No. 118059R-RFUSP42V01




         Product         :      IEEE 802.11b/g/n WIFI/ BT Combo slim module
         Test Item       :      Peak Power Output Data
         Test Site       :      No.3 OATS
         Test Mode       :      Mode 4: Transmit (802.11n MCS0 15Mbps 40M-BW)



                                                  Average Power                          Peak
                                          For different Data Rate (Mbps)                Power
             Frequency                                                                           Required
Channel No                                                                                                  Result
               (MHz)          15     30      45     60     90        120   135   150      15      Limit

                                                  Measurement Level (dBm)

    01         2422          12.56   --      --      --     --       --    --     --     20.81   <30dBm     Pass

    04         2437          15.25 15.24 25.24 25.23 15.21 15.18 15.19 15.17             21.87   <30dBm     Pass

    07         2452          12.47   --      --      --     --       --    --     --     20.27   <30dBm     Pass
Note:    Peak Power Output Value =Reading value on peak power meter + cable loss




                                                   Page: 18 of 112


                                                                              Report No. 118059R-RFUSP42V01




4.        Radiated Emission

4.1.      Test Equipment

          The following test equipment are used during the radiated emission test:
     Test Site          Equipment               Manufacturer           Model No./Serial No.            Last Cal.
      Site # 3 X    Bilog Antenna             Schaffner Chase      CBL6112B/2673                      Sep., 2010
              X     Horn Antenna              Schwarzbeck          BBHA9120D/D305                     Sep., 2010
              X     Horn Antenna              Schwarzbeck          BBHA9170/208                       Jul., 2011
              X     Pre-Amplifier             Agilent              8447D/2944A09549                   Sep., 2010
              X     Spectrum Analyzer         Agilent              E4407B / US39440758                May, 2011
              X     Test Receiver             R&S                  ESCS 30/ 825442/018                Sep., 2010
              X     Coaxial Cable             QuieTek              QTK-CABLE/ CAB5                    Feb., 2011
              X     Controller                QuieTek              QTK-CONTROLLER/ CTRL3                 N/A
              X     Coaxial Switch            Anritsu              MP59B/6200265729                      N/A
          Note:    1. All equipments are calibrated with traceable calibrations. Each calibration is traceable to
                      the national or international standards.
                   2. The test instruments marked with “X” are used to measure the final test results.




                                                 Page: 19 of 112


                                                                               Report No. 118059R-RFUSP42V01




4.2.    Test Setup

 Radiated Emission Below 1GHz

                                                              3m


                     FRP Dome
                                                                                                             1m to 4m




                                                                    The height of broad
                                                                    band antenna was
                                                                    scanned from 1m to 4m.

                                                                    The distance between
                                   EUT                              antenna and turn table
            Non-Conducted Table
                                                                    was 3m..
                                         80cm


                                                   Fully soldered Metal Ground                       To Controller
                Test                                                                                     To Receiver
              Receiver




 Radiated Emission Above 1GHz




                                                               3m


                  FRP Dome




                                                                     The height of broad band
                                                                     or Dipole Antenna was
                                                                     scanned from 1M to 4M.

                                                                     The distance between
                                  EUT                                antenna and turn table
                                                                     was 3M regards to the
                                                                     standard adopted.
                                         80cm


                                                                                       To Receiver       Pre-
                                                                                                       Amplifier




                                          Page: 20 of 112


                                                                         Report No. 118059R-RFUSP42V01




4.3.   Limits

       Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated
       by at least 20dB below the level of the fundamental or to the general radiated emission limits in
       paragraph 15.209, whichever is the lesser attenuation.


                          FCC Part 15 Subpart C Paragraph 15.209(a) Limits
                      Frequency
                        MHz                     uV/m @3m                 dBuV/m@3m

                         30-88                      100                        40

                        88-216                      150                       43.5

                       216-960                      200                        46

                      Above 960                     500                        54
                    Remarks: E field strength (dBuV/m) = 20 log E field strength (uV/m)




                                             Page: 21 of 112


                                                                         Report No. 118059R-RFUSP42V01




4.4.   Test Procedure

       The EUT was setup according to ANSI C63.4, 2009 and tested according to DTS test procedure
       of Mar. 2005 KDB558074 for compliance to FCC 47CFR 15.247 requirements.
       The EUT is placed on a turn table which is 0.8 meter above ground. The turn table is rotated 360
       degrees to determine the position of the maximum emission level. The EUT was positioned such that
       the distance from antenna to the EUT was 3 meters.
       The antenna is scanned between 1 meter and 4 meters to find out the maximum emission level. This is
       repeated for both horizontal and vertical polarization of the antenna. In order to find the maximum
       emission, all of the interface cables were manipulated according to ANSI C63.4:2009 on radiated
       measurement.
       The resolution bandwidth below 1GHz setting on the field strength meter is 120 kHz and above 1GHz
       is 1MHz.
       Radiated emission measurements below 1GHz are made using broadband Bilog antenna and
       above 1GHz are made using Horn Antennas.
       The measurement is divided into the Preliminary Measurement and the Final Measurement.
       The suspected frequencies are searched for in Preliminary Measurement with the measurement
       antenna kept pointed at the source of the emission both in azimuth and elevation, with the polarization
       of the antenna oriented for maximum response. The antenna is pointed at an angle towards the source
       of the emission, and the EUT is rotated in both height and polarization to maximize the measured
       emission. The emission is kept within the illumination area of the 3 dB bandwidth of the antenna.
       The worst radiated emission is measured in the Open Area Test Site on the Final Measurement.
       The frequency range from 30MHz to 10th harminics is checked.



4.5.   Uncertainty

         3.9 dB above 1GHz
         3.8 dB below 1GHz




                                             Page: 22 of 112


                                                                             Report No. 118059R-RFUSP42V01




4.6.       Test Result of Radiated Emission

           Product        :      IEEE 802.11b/g/n WIFI/ BT Combo slim module
           Test Item      :      Harmonic Radiated Emission Data
           Test Site      :      No.3 OATS
           Test Mode      :      Mode 1: Transmit (802.11b 1Mbps) (2412MHz)


       Frequency              Correct       Reading          Measurement          Margin              Limit
                              Factor         Level              Level
         MHz                    dB           dBuV              dBuV/m                dB              dBuV/m
       Horizontal
  Peak Detector:
       4824.000               3.261          39.640                42.901         -31.099            74.000
       7236.000               10.650         36.530                47.180         -26.820            74.000
       9648.000               13.337         35.640                48.976         -25.024            74.000


Average Detector:
           --
        Vertical
  Peak Detector:
       4824.000               6.421          46.100                52.521         -21.479            74.000
       7236.000               11.495         35.780                47.275         -26.725            74.000
       9648.000               13.807         36.950                50.756         -23.244            74.000


Average Detector:
           --



Note:
        1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average
           measurements as necessary.
        2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto.
        3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto.
        4. Measurement Level = Reading Level + Correct Factor.
        5. Correct Factor = Antenna factor + Cable loss –Amplifier gain.
        6. The average measurement was not performed when the peak measured data under the limit of average
           detection.
       7. The emission levels of other frequencies are very lower than the limit and not show in test report.




                                                 Page: 23 of 112


                                                                          Report No. 118059R-RFUSP42V01



           Product       :      IEEE 802.11b/g/n WIFI/ BT Combo slim module
           Test Item     :      Harmonic Radiated Emission Data
           Test Site     :      No.3 OATS
           Test Mode     :      Mode 1: Transmit (802.11b 1Mbps) (2437 MHz)

    Frequency                Correct       Reading         Measurement         Margin              Limit
                             Factor          Level               Level
          MHz                  dB           dBuV             dBuV/m               dB              dBuV/m
    Horizontal
  Peak Detector:
        4874.000             3.038          39.440               42.477        -31.523            74.000
        7311.000             11.795         35.410               47.204        -26.796            74.000
        9748.000             12.635         36.800               49.435        -24.565            74.000


 Average Detector:
            --
        Vertical
  Peak Detector:
        4874.000             5.812          45.410               51.221        -22.779            74.000
        7311.000             12.630         35.650               48.279        -25.721            74.000
        9748.000             13.126         37.390               50.516        -23.484            74.000


Average Detector:
            --



Note:
        1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average
           measurements as necessary.
        2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto.
        3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto.
        4. Measurement Level = Reading Level + Correct Factor.
        5. Correct Factor = Antenna factor + Cable loss –Amplifier gain.
        6. The average measurement was not performed when the peak measured data under the limit of average
           detection.
    7. The emission levels of other frequencies are very lower than the limit and not show in test report.




                                               Page: 24 of 112


                                                                          Report No. 118059R-RFUSP42V01



           Product       :      IEEE 802.11b/g/n WIFI/ BT Combo slim module
           Test Item     :      Harmonic Radiated Emission Data
           Test Site     :      No.3 OATS
           Test Mode     :      Mode 1: Transmit (802.11b 1Mbps) (2462 MHz)

    Frequency                Correct       Reading         Measurement         Margin              Limit
                             Factor         Level                Level
         MHz                   dB           dBuV             dBuV/m               dB              dBuV/m
    Horizontal
  Peak Detector:
    4924.000                 2.858          40.550               43.407        -30.593            74.000
    7386.000                 12.127         35.890               48.018        -25.982            74.000
    9848.000                 12.852         37.300               50.153        -23.847            74.000


Average Detector:
           --
        Vertical
  Peak Detector:
    4924.000                 5.521          46.610               52.130        -21.870            74.000
    7386.000                 13.254         34.700               47.954        -26.046            74.000
    9848.000                 13.367         36.730               50.097        -23.903            74.000


Average Detector:
           --



Note:
        1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average
           measurements as necessary.
        2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto.
        3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto.
        4. Measurement Level = Reading Level + Correct Factor.
        5. Correct Factor = Antenna factor + Cable loss –Amplifier gain.
        6. The average measurement was not performed when the peak measured data under the limit of average
           detection.
    7. The emission levels of other frequencies are very lower than the limit and not show in test report.




                                               Page: 25 of 112


                                                                           Report No. 118059R-RFUSP42V01



           Product       :      IEEE 802.11b/g/n WIFI/ BT Combo slim module
           Test Item     :      Harmonic Radiated Emission Data
           Test Site     :      No.3 OATS
           Test Mode     :      Mode 2: Transmit (802.11g 6Mbps) (2412MHz)


    Frequency                Correct       Reading          Measurement         Margin            Limit
                             Factor         Level              Level
         MHz                   dB           dBuV              dBuV/m              dB             dBuV/m
   Horizontal
  Peak Detector:
    4824.000                 3.261          39.860                43.121       -30.879            74.000
    7236.000                 10.650         36.690                47.340       -26.660            74.000
    9648.000                 13.337         36.690                50.026       -23.974            74.000


Average Detector:
           --
        Vertical
  Peak Detector:
    4824.000                 6.421          44.270                50.691       -23.309            74.000
    7236.000                 11.495         36.330                47.825       -26.175            74.000
    9648.000                 13.807         36.310                50.116       -23.884            74.000


Average Detector:
           --




Note:
        1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average
           measurements as necessary.
        2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto.
        3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto.
        4. Measurement Level = Reading Level + Correct Factor.
        5. Correct Factor = Antenna factor + Cable loss –Amplifier gain.
        6. The average measurement was not performed when the peak measured data under the limit of average
           detection.
        7. The emission levels of other frequencies are very lower than the limit and not show in test report.




                                                Page: 26 of 112


                                                                           Report No. 118059R-RFUSP42V01



           Product       :      IEEE 802.11b/g/n WIFI/ BT Combo slim module
           Test Item     :      Harmonic Radiated Emission Data
           Test Site     :      No.3 OATS
           Test Mode     :      Mode 2: Transmit (802.11g 6Mbps) (2437 MHz)

    Frequency                Correct       Reading          Measurement         Margin            Limit
                             Factor          Level                Level
         MHz                   dB           dBuV              dBuV/m              dB             dBuV/m
    Horizontal
  Peak Detector:
    4874.000                 3.038          38.930                41.967       -32.033            74.000
    7311.000                 11.795         35.840                47.634       -26.366            74.000
    9748.000                 12.635         36.310                48.945       -25.055            74.000


Average Detector:
           --


  Peak Detector:
    4874.000                 5.812          46.690                52.501       -21.499            74.000
    7311.000                 12.630         35.330                47.959       -26.041            74.000
    9748.000                 13.126         37.250                50.376       -23.624            74.000


Average Detector:
           --



Note:
        1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average
           measurements as necessary.
        2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto.
        3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto.
        4. Measurement Level = Reading Level + Correct Factor.
        5. Correct Factor = Antenna factor + Cable loss –Amplifier gain.
        6. The average measurement was not performed when the peak measured data under the limit of average
           detection.
        7. The emission levels of other frequencies are very lower than the limit and not show in test report.




                                                Page: 27 of 112


                                                                           Report No. 118059R-RFUSP42V01



           Product       :      IEEE 802.11b/g/n WIFI/ BT Combo slim module
           Test Item     :      Harmonic Radiated Emission Data
           Test Site     :      No.3 OATS
           Test Mode     :      Mode 2: Transmit (802.11g 6Mbps) (2462 MHz)

    Frequency                Correct       Reading          Measurement         Margin            Limit
                             Factor         Level                 Level
         MHz                   dB           dBuV              dBuV/m              dB             dBuV/m
   Horizontal
 Peak Detector:
    4924.000                 2.858          40.260                43.117       -30.883            74.000
    7386.000                 12.127         35.140                47.268       -26.732            74.000
    9848.000                 12.852         36.300                49.153       -24.847            74.000


Average Detector:
           --
        Vertical
 Peak Detector:
    4924.000                 5.521          46.770                52.290       -21.710            74.000
    7386.000                 13.254         34.830                48.084       -25.916            74.000
    9848.000                 13.367         36.150                49.517       -24.483            74.000


Average Detector:
           --



Note:
        1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average
           measurements as necessary.
        2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto.
        3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto.
        4. Measurement Level = Reading Level + Correct Factor.
        5. Correct Factor = Antenna factor + Cable loss –Amplifier gain.
        6. The average measurement was not performed when the peak measured data under the limit of average
           detection.
        7. The emission levels of other frequencies are very lower than the limit and not show in test report.




                                                Page: 28 of 112


                                                                           Report No. 118059R-RFUSP42V01



           Product       :      IEEE 802.11b/g/n WIFI/ BT Combo slim module
           Test Item     :      Harmonic Radiated Emission Data
           Test Site     :      No.3 OATS
           Test Mode     :      Mode 3: Transmit (802.11n MCS0 7.2Mbps 20M-BW)(2412MHz)


    Frequency                Correct       Reading          Measurement         Margin            Limit
                             Factor         Level              Level
          MHz                  dB           dBuV              dBuV/m              dB             dBuV/m
    Horizontal
  Peak Detector:
        4824.000             3.261          37.730                40.991       -33.009            74.000
        7236.000             10.650         36.570                47.220       -26.780            74.000
        9648.000             13.337         36.000                49.336       -24.664            74.000


Average Detector:
            --
        Vertical
  Peak Detector:
        4824.000             6.421          43.040                49.461       -24.539            74.000
        7236.000             11.495         36.440                47.935       -26.065            74.000
        9648.000             13.807         36.590                50.396       -23.604            74.000


Average Detector:
            --
Note:
        1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average
           measurements as necessary.
        2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto.
        3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto.
        4. Measurement Level = Reading Level + Correct Factor.
        5. Correct Factor = Antenna factor + Cable loss –Amplifier gain.
        6. The average measurement was not performed when the peak measured data under the limit of average
           detection.
        7. The emission levels of other frequencies are very lower than the limit and not show in test report.




                                                Page: 29 of 112


                                                                           Report No. 118059R-RFUSP42V01



Product            :   IEEE 802.11b/g/n WIFI/ BT Combo slim module
Test Item          :   Harmonic Radiated Emission Data
Test Site          :   No.3 OATS
Test Mode          :   Mode 3: Transmit (802.11n MCS0 7.2Mbps 20M-BW) (2437 MHz)

    Frequency               Correct        Reading          Measurement         Margin            Limit
                            Factor          Level                 Level
         MHz                  dB            dBuV              dBuV/m              dB             dBuV/m
    Horizontal
  Peak Detector:
    4874.000                 3.038          37.790                40.827       -33.173            74.000
    7311.000                11.795          35.550                47.344       -26.656            74.000
    9748.000                12.635          36.940                49.575       -24.425            74.000


Average Detector:
           --
        Vertical
  Peak Detector:
    4874.000                 5.812          44.350                50.161       -23.839            74.000
    7311.000                12.630          35.450                48.079       -25.921            74.000
    9748.000                13.126          36.790                49.916       -24.084            74.000


Average Detector:
           --
Note:
        1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average
           measurements as necessary.
        2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto.
        3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto.
        4. Measurement Level = Reading Level + Correct Factor.
        5. Correct Factor = Antenna factor + Cable loss –Amplifier gain.
        6. The average measurement was not performed when the peak measured data under the limit of average
           detection.
        7. The emission levels of other frequencies are very lower than the limit and not show in test report.




                                                Page: 30 of 112


                                                                          Report No. 118059R-RFUSP42V01



Product         :   IEEE 802.11b/g/n WIFI/ BT Combo slim module
Test Item       :   Harmonic Radiated Emission Data
Test Site       :   No.3 OATS
Test Mode       :   Mode 3: Transmit (802.11n MCS0 7.2Mbps 20M-BW) (2462 MHz)

    Frequency             Correct         Reading         Measurement          Margin              Limit
                           Factor          Level                Level
         MHz                dB             dBuV             dBuV/m                dB              dBuV/m
    Horizontal
  Peak Detector:
    4924.000               2.858           38.880               41.737         -32.263            74.000
    7386.000               12.127          35.430               47.558         -26.442            74.000
    9848.000               12.852          36.690               49.543         -24.457            74.000


Average Detector:
           --
        Vertical
  Peak Detector:
    4924.000               5.521           44.650               50.170         -23.830            74.000
    7386.000               13.254          35.460               48.714         -25.286            74.000
    9848.000               13.367          37.080               50.447         -23.553            74.000


Average Detector:
           --
Note:
        1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average
           measurements as necessary.
        2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto.
        3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto.
        4. Measurement Level = Reading Level + Correct Factor.
        5. Correct Factor = Antenna factor + Cable loss –Amplifier gain.
        6. The average measurement was not performed when the peak measured data under the limit of average
           detection.
    7. The emission levels of other frequencies are very lower than the limit and not show in test report.




                                              Page: 31 of 112


                                                                           Report No. 118059R-RFUSP42V01




Product         :   IEEE 802.11b/g/n WIFI/ BT Combo slim module
Test Item       :   Harmonic Radiated Emission Data
Test Site       :   No.3 OATS
Test Mode       :   Mode 4: Transmit (802.11n MCS0 15Mbps 40M-BW)(2422MHz)


    Frequency             Correct          Reading          Measurement         Margin            Limit
                          Factor            Level              Level
         MHz                dB              dBuV              dBuV/m              dB             dBuV/m
   Horizontal
 Peak Detector:
    4844.000               3.171            38.510                41.681       -32.319            74.000
    7266.000              11.162            36.270                47.432       -26.568            74.000
    9688.000              12.964            38.400                51.365       -22.635            74.000


Average Detector:
           --
        Vertical
 Peak Detector:
    4844.000               6.178            40.280                46.458       -27.542            74.000
    7266.000              11.982            36.220                48.202       -25.798            74.000
    9688.000              13.507            37.540                51.048       -22.952            74.000


Average Detector:
           --
Note:
        1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average
           measurements as necessary.
        2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto.
        3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto.
        4. Measurement Level = Reading Level + Correct Factor.
        5. Correct Factor = Antenna factor + Cable loss –Amplifier gain.
        6. The average measurement was not performed when the peak measured data under the limit of average
           detection.
        7. The emission levels of other frequencies are very lower than the limit and not show in test report.




                                                Page: 32 of 112



Document Created: 2011-08-19 21:50:51
Document Modified: 2011-08-19 21:50:51

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC