RF Exposure

FCC ID: TLZ-CU362

RF Exposure Info

Download: PDF
FCCID_4060677

Report No. 1890134R-RFUSP02V00-A RF Exposure Evaluation declaration Product Name ： Bluetooth 5.0 LE Stamp Module Trade Name ： AzureWave Model No. ： AW-CU362 FCC ID. ： TLZ-CU362 Applicant : AzureWave Technologies, Inc. Address : 8F ., No.94, Baozhong Rd. , Xindian Dist., New Taipei City, Taiwan 231 Date of Receipt : Sep. 11, 2018 Date of Declaration : Oct. 03, 2018 Report No. : 1890134R-RFUSP02V00-A Report Version : V1.0 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd.. Page: 1 of 3

Report No. 1890134R-RFUSP02V00-A 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18℃and 78％ RH. Page: 2 of 3

Report No. 1890134R-RFUSP02V00-A 1.3. Test Result of RF Exposure Evaluation Product Bluetooth 5.0 LE Stamp Module Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 3.78 dBi or 2.39 dBi in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: GFSK Bluetooth Function Channel Frequency Output Power to Antenna Power Density at R = 20 cm Channel (MHz) (mW) (mW/cm2) 00 2402 1.167 0.001 19 2440 1.125 0.001 39 2480 1.067 0.001 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. Page: 3 of 3


Document Created: 2018-10-26 10:16:49
Document Modified: 2018-10-26 10:16:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC