Modular Approval Cover Letter

FCC ID: TLZ-CU362

Cover Letter(s)

Download: PDF
FCCID_4060673

                          AzureWave Technologies, Inc.
              Address: 8F ., No.94, Baozhong Rd. , Xindian Dist. New Taipei City Taiwan


                                Module Approval Letter
Date: 2018/9/20
FCC ID: TLZ-CU362
The following attestation addresses the requirements to support modular approval:
                                                        Yes (provide brief
          Modular approval requirement                                                    No *
                                                           statement)
     The radio elements must have the radio
     frequency circuitry shielded. Physical             Yes,    the  radio
 1   components and tuning capacitor(s) may be          frequency circuitry
     located external to the shield, but must be on     shielded.
     the module assembly.
     The module must have buffered                      Yes, the module has
     modulation/data inputs to ensure that the          buffered
 2
     device will comply with Part 15 requirements       modulation/data
     with any type of input signal.                     input.
     The module must contain power supply               Yes, the module has
 3   regulation on the module.                          its   own      power
                                                        supply regulation.
     The module must contain a permanently
                                                        Yes, the module
     attached antenna, or contain a unique antenna
                                                        complies with the
 4   connector, and be marketed and operated only
                                                        provision for built-in
     with specific antenna(s), per Sections 15.203,
                                                        Antenna.
     15.204(b), 15.204(c), 15.212(a), 2.929(b).
     The module must demonstrate compliance in a        Yes, please refer to
 5
     stand-alone configuration.                         the test reports.
     The module must be labelled with its
                                                        Yes,     FCC    ID
     permanently affixed FCC ID label, or use an
 6                                                      information      is
     electronic display (See KDB Publication
                                                        showing on module.
     784748 about labelling requirements).
     The module must comply with all specific rules     Yes,      compliance
     applicable to the transmitter. The grantee must    requirements
 7   provide comprehensive instructions to explain      instructions     are
     compliance requirements.                           provided     in  the
                                                        instruction manual.
     The module must comply with RF exposure            Yes, please refer to
 8
     requirements                                       the test reports.



Signature
Contact Name / Job Title: Patrick Lin / Director
Tel: 02-55995599 ext. 5580
Fax: 02-66289666
Email: Patrick.lin@azurewave.com



Document Created: 2018-10-01 16:13:06
Document Modified: 2018-10-01 16:13:06

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC