RF Exposure Information (MPE).pdf

FCC ID: TLZ-BT715C

RF Exposure Info

Download: PDF
FCCID_2438607

RF EXPOSURE REPORT REPORT NO.: SA140804E03 MODEL NO.: AW-BT715C FCC ID: TLZ- BT715C RECEIVED: Aug. 04, 2014 TESTED: Aug. 26, 2014 ISSUED: Sep. 26, 2014 APPLICANT: AzureWave Technologies, Inc. ADDRESS: 8 F., No. 94, Baozhong Rd., Xindian,Taipei, Taiwan 231 ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA140804E03 1 of 7 Report Format Version 5.0.1

TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION...................................................................................................... 4 2. EVALUATION RESULT ........................................................................................... 5 2.1 SAR TEST EXCLUSION THRESHOLDS ................................................................ 5 3. ANTENNA GAIN ...................................................................................................... 6 Report No.: SA140804E03 2 of 7 Report Format Version 5.0.1

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140804E03 Original release Sep. 26, 2014 Report No.: SA140804E03 3 of 7 Report Format Version 5.0.1

1. CERTIFICATION PRODUCT: Bluetooth Module BRAND NAME: AzureWave MODEL NO.: AW-BT715C TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: AzureWave Technologies, Inc. TESTED: Aug. 26, 2014 STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment (Model: AW-BT715C) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Sep. 26, 2014 ( Claire Kuan, Specialist ) APPROVED BY : , DATE: Sep. 26, 2014 ( May Chen, Manager ) Report No.: SA140804E03 4 of 7 Report Format Version 5.0.1

2. EVALUATION RESULT 2.1 SAR TEST EXCLUSION THRESHOLDS Following FCC KDB 447498 D03 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA140804E03 5 of 7 Report Format Version 5.0.1

3. ANTENNA GAIN The antennas provided to the EUT, please refer to the following table: Frequency Cable Net Cable Ant. Antenna Antenna range Vender Model No. Loss Gain Length No. Type Connector (GHz to (dB) (dBi) (mm) GHz) 1 Yageo ANT9520LL06R2400A Chip RP-SMA - 2.85 - 2.4~2.5 2 Yageo ANT1204F001R2400A Chip I-PEX 0.4 1.27 65 2.4~2.5 3 Yageo ANT8010LL04R2400A Chip RP-SMA - 5.46 - 2.4~2.5 4 Taoglas FXP74.07.0100A PIFA I-PEX 0.5 4 100 2.4~2.5 MSA-4008-25GC1-A1 5 MAG LAYERS PIFA I-PEX 0.7 4 150 2.4~2.5 6 Taoglas FXP73.07.0100A PCB I-PEX 0.5 2.5 100 2.4~2.5 7 Yageo ANTX100P001B24003 PCB I-PEX 0.5 4.4 100 2.4~2.5 8 MAG LAYERS FPA-4605-2G4C1-A18 PCB I-PEX 0.8 2.75 170 2.4~2.5 9 Taoglas GW11.A153 Dipole RP-SMA - 2.3 - 2.4~2.5 10 Taoglas FXP830.24.0100B Dipole I-PEX 0.5 1.8 100 2.4~2.5 11 MAG LAYERS EDA-1713-2G4C1-B16 Dipole I-PEX 0.5 5 100 2.4~2.5 Report No.: SA140804E03 6 of 7 Report Format Version 5.0.1

Maximum measured transmitter power: BT-EDR mode Min. test SAR test 1-g SAR test Frequency Max. Power separation exclusion exclusion Result (GHz) (mW) distance calculation value thresholds (mm) 2.402 ~ 2.480 3.864 5 1.197 3 Pass NOTE: 1. Calculate SAR test exclusion thresholds from condition “1” formulas. BT-LE mode Min. test SAR test 1-g SAR test Frequency Max. Power separation exclusion exclusion Result (GHz) (mW) distance calculation value thresholds (mm) 2.402 ~ 2.480 2.173 5 0.673 3 Pass NOTE: 1. Calculate SAR test exclusion thresholds from condition “1” formulas. --- END --- Report No.: SA140804E03 7 of 7 Report Format Version 5.0.1


Document Created: 2019-09-14 16:45:38
Document Modified: 2019-09-14 16:45:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC