RF Exposure Evaluation

FCC ID: TLZ-BT076

RF Exposure Info

Download: PDF
FCCID_1522399

RF Exposure Evaluation Evaluate for portable condition. output < 60/f(GHz) mW, SAR evaluation is generally not required Operating Frequency Output Power Output Power 60/f(GHz) (GHz) (dBm) (mW) 2.4 1.49 1.409 25 output < 60/f(GHz) mW 1.409mW< 25mW Thus No SAR is required for Portable used condition

FCC TEST REPORT Report No. : FR122348 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) |E|²,|H|² or S (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) |E|²,|H|² or S (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method 30  P  G E2 E (V/m) = Power Density: Pd (W/m²) = d 377 E = Electric field (V/m) P = Peak RF output power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 30  P  G 377  d 2 From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. 1.3. Calculated Result and Limit Antenna Type : Printed Antenna Max Conducted Power for Bluetooth: 1.49dBm Power Test Min. User Conducted Power Conducted Gain (dBi) Numeric Gain Density Mode Distance (cm) (dBm) Power (mW) (mW/cm2) 2.4G 20 2 1.584893 1.87 1.5382 0.0031 Page No. : 2 of 2 FCC ID : TLZ-BT076


Document Created: 2011-08-12 08:36:36
Document Modified: 2011-08-12 08:36:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC