WLE600VX_User Manual 2017-06-05

FCC ID: TK4WLE600VX

Users Manual

Download: PDF
FCCID_3416180

Es es COMPEX 2x2 2.4/5GHz 11ac miniPCle Radio LCdopnbnas Model: WLEGOOVX, WLEGOOVX—I Date: 2015,03,30 Features * Qualcomm—Atheros QCA9892 * 2.AGHz max 24dBm & 5GHz max 23dBm output power * TEEE 802.11ac complaint & backward compatible with 802.113/b/g/n * 2X2 MIMO Technology & up to 867Mbps * MiniPCI Express 1.1 interface * Supports Spatial Multiplexing, Maximal Ratio Combining (MRC), Space Time Block Code (STBC) * Supports TEEE 802.11d, e, h, I, k RO, v time stamp, and w standards * Supports Client Dynamic Frequency Selection (DFS) * Cards are individually calibrated for Quality Assurance * Supported by either CompexWRT with Atheros Reference Wireless Driver

Technical Specifications System Information Chipset QCA9892 Host Interface PCI-Express 1.1 Standard Operating Voltage 3.3 VDC Power Consumption 3.5W Antenna Connector 2 x U.F L Frequency Range 2.4G: 2.412 ~ 2.462 GHz 5G: 5.180 ~ 5.825 GHz Modulation Techniques BPSK, QPSK, DBPSK,DQPSK,CCK,16-QAM, 64-QAM, 256-QAM RoHS Compliance Yes Operating: -20º C to 70ºC; Temperature Range Storage: -40ºC to 90º C Operating:5% to 95% (non-condensing) Humidity Storage: Max.90% (non-condensing) Dimensions (mm) 50.95 x 30 x 3.2 (H x W x D) Band TX Specifications RX Specifications Data TX Power TX Power Data Tolerance Sensitivity Tolerance Rate (per chain) (2 chains) Rate 802.11bg 6-24Mbps 22dBm N/A ±0.5dB 6Mbps -94dBm ±2dB 36Mbps 21dBm N/A ±0.5dB 36Mbps -86dBm ±2dB 48Mbps 20dBm N/A ±0.5dB 48Mbps -82dBm ±2dB 54Mbps 19dBm N/A ±0.5dB 54Mbps -80dBm ±2dB MCS 0 N/A 24dBm ±0.5dB MCS 0 -94dBm ±2dB MCS 1 N/A 24dBm ±0.5dB MCS1 -94dBm ±2dB MCS 2 N/A 24dBm ±0.5dB MCS2 -92dBm ±2dB 2.4GHz 11n MCS 3 N/A 23dBm ±0.5dB MCS 3 -88dBm ±2dB HT20 MCS 4 N/A 23dBm ±0.5dB MCS 4 -84dBm ±2dB MCS 5 N/A 23dBm ±0.5dB MCS 5 -81dBm ±2dB MCS 6 N/A 21dBm ±0.5dB MCS 6 -78dBm ±2dB MCS 7 N/A 19dBm ±0.5dB MCS 7 -77dBm ±2dB MCS 0 N/A 19dBm ±0.5dB MCS 0 -93dBm ±2dB MCS 1 N/A 19dBm ±0.5dB MCS1 -91dBm ±2dB MCS 2 N/A 19dBm ±0.5dB MCS2 -90dBm ±2dB 2.4GHz 11n MCS 3 N/A 17dBm ±0.5dB MCS 3 -85dBm ±2dB HT40 MCS 4 N/A 17dBm ±0.5dB MCS 4 -82dBm ±2dB MCS 5 N/A 17dBm ±0.5dB MCS 5 -78dBm ±2dB MCS 6 N/A 16dBm ±0.5dB MCS 6 -77dBm ±2dB MCS 7 N/A 16dBm ±0.5dB MCS 7 -75dBm ±2dB 6-24Mbps N/A 21dBm ±0.5dB 6Mbps -94dBm ±2dB 802.11a 36Mbps N/A 20dBm ±0.5dB 36Mbps -86dBm ±2dB 48Mbps N/A 19dBm ±0.5dB 48Mbps -82dBm ±2dB 54Mbps N/A 18dBm ±0.5dB 54Mbps -80dBm ±2dB MCS0 N/A 23dBm ±0.5dB MCS0 -93dBm ±2dB MCS1 N/A 23dBm ±0.5dB MCS1 -91dBm ±2dB MCS2 N/A 23dBm ±0.5dB MCS2 -90dBm ±2dB MCS3 N/A 22dBm ±0.5dB MCS3 -85dBm ±2dB 5GHz 11an/ac MCS4 N/A 22dBm ±0.5dB MCS4 -82dBm ±2dB HT20 MCS5 N/A 20dBm ±0.5dB MCS5 -78dBm ±2dB MCS6 N/A 19dBm ±0.5dB MCS6 -77dBm ±2dB MCS7 N/A 19dBm ±0.5dB MCS7 -75dBm ±2dB MCS8 N/A 18dBm ±0.5dB MCS8 -73dBm ±2dB MCS9 N/A 18dBm ±0.5dB MCS9 -71dBm ±2dB MCS0 N/A 23dBm ±0.5dB MCS0 -93dBm ±2dB MCS1 N/A 23dBm ±0.5dB MCS1 -91dBm ±2dB MCS2 N/A 23dBm ±0.5dB MCS2 -90dBm ±2dB MCS3 N/A 21dBm ±0.5dB MCS3 -85dBm ±2dB 5GHz 11n/ac MCS4 N/A 21dBm ±0.5dB MCS4 -82dBm ±2dB HT40 MCS5 N/A 19dBm ±0.5dB MCS5 -78dBm ±2dB MCS6 N/A 18dBm ±0.5dB MCS6 -77dBm ±2dB MCS7 N/A 18dBm ±0.5dB MCS7 -75dBm ±2dB MCS8 N/A 17dBm ±0.5dB MCS8 -73dBm ±2dB MCS9 N/A 17dBm ±0.5dB MCS9 -71dBm ±2dB MCS0 N/A 20dBm ±0.5dB MCS0 -89dBm ±2dB MCS1 N/A 20dBm ±0.5dB MCS1 -88dBm ±2dB MCS2 N/A 20dBm ±0.5dB MCS2 -85dBm ±2dB MCS3 N/A 19dBm ±0.5dB MCS3 -81dBm ±2dB 5GHz11ac MCS4 N/A 19dBm ±0.5dB MCS4 -79dBm ±2dB HT80 MCS5 N/A 19dBm ±0.5dB MCS5 -75dBm ±2dB MCS6 N/A 18dBm ±0.5dB MCS6 -74dBm ±2dB MCS7 N/A 18dBm ±0.5dB MCS7 -72dBm ±2dB MCS8 N/A 17dBm ±0.5dB MCS8 -70dBm ±2dB MCS9 N/A 17dBm ±0.5dB MCS9 -68dBm ±2dB

Dimension Drawing Ordering Information Item Code Chipset Form factor Card Information WLE600VX Atheros 9892 Full size 2x2 802.11ac 2.4G/5G PCIe mini card

Compliance Information FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution: (1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. (3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. (4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. (1) The modules FCC ID is not visible when installed in the host, or (2) If the host is marketed so that end users do not have straight forward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent Caution1: When the module uses the frequency band 5150 - 5250 MHz & 5725 - 5850 MHz, the module should be applied to the P-T-P end-product, 5250 - 5350 MHz & 5470 - 5725 MHz can’t use in these type products. Caution2: Both of the WLAN 2.4GHz Band and WLAN 5GHz Band can’t transmit simultaneously.

The antenna gain which being use as below: Antenna Type Frequency Model Model Max Peak Band Antenna (MHz) Gain (dBi) 5150 ~ 5875 MTI Wireless Edge Ltd. MT—485001 18.0 PENSON Wireless, 4900 5875 Inc., Taiwan OM24580703 7.0 2412 ~ 24g2 PENSON Wireless, Inc., Taiwan orpysg9793 5.0 OEM integration instructions: This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co—located with any other transmit or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are met. further transmitter test will not be required. However. the OEM integrator is still responsible for testing their end—product for any additional compliance requirement with this module installed (for example. digital device emission. PC peripheral requirements. etc.) End product labeling: This transmitter module is authorization only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following : "Contains Transmitter Module FCC ID: TKA4WLESOOVX or Contains FCC ID: TKA4WLESOOVX®. Information that must be placed in the end user manual: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user‘s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.


Document Created: 2017-06-05 19:19:06
Document Modified: 2017-06-05 19:19:06
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC