Modular Approval Letter

FCC ID: TK4-WLM54GP28ESD

Cover Letter(s)

Download: PDF
FCCID_1063519

                            Compex Systems Pte Ltd
TRANSMITTER MODULAR APPROVAL ATTESTATION
January, 15 2009
Federal Communications Commission

Re: Application Modular Approval Certification for FCC ID: TK4—WLMS4GP28ESD

Gentlemen:

The following attestation addresses the eight requirements to support modular approval as required by

the FCC Part 15.212 Modular transmitters.
 1    The modular transmitter has its own RF shielding and does not rely upon the shielding provided
      by the device into whichit is installed in order to comply with Part 15 limits.
2     The modular transmitter has buffered modulation/data inputs. All inputs to the modules are
      buffered through the radio circuitry.
      The modular transmitter has its own power supply regulator.
5>




      The modular transmitter has an antenna complies with requirements of §§15.203, 15.204(b) and
      15.204(c). The antenna has a MMCX type of connector at the transmitter end. Also the antenna
      will be internal in the OEM host equipment and inaccessible to the user.
      The modular approval transmitter was tested in a stand—alone configuration by using AP platform
      without chassis. The platform allows the transmitter to be controlled by using Ethernet cable.
      The modular transmitter will be labeled with its own FCC ID. Also the OEM host computer
      manufacturer will be informed to display a label referring to the enclosed module. The exterior
      label will read as follows: "Contains Transmitter Module FCC ID: "TK4—WLMS4GP28ESD" or
      "Contains TX FCC ID: "TK4—WLMS4GP28ESD®.


      The modular transmitter is designed for manufacturers so that the user cannot influence the
      operation of the transmitter that will operate outside of the scope of the regulations.
      The modular transmitter meets the MPE calculations of 47 CFR 1.1307(b) (1). Also, SAR data is
       available if necessary. The end users are informed to keep the minimum distance away from the
       antenna according to 15.247.
If there are any additional questions or if further information is needed, please contact us at your earliest
convenience at: +86 (512) 6295—0013
Sincerely




Yaw Thiam‘ Teng / Manager
Compex Systems Pte Ltd.




              135 Joo Seng Road,#08—01 PM Industrial Building Singapore 368363
                                        TEL: +86 (512) 6295—0013



Document Created: 2019-11-09 06:29:20
Document Modified: 2019-11-09 06:29:20

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC