MPE test report_rev1

FCC ID: TE7WCS200

RF Exposure Info

Download: PDF
FCCID_3904042

ISSUED BY Shenzhen BALUN Technology Co., Ltd. Lm FOR 10W Wireless Fast Charging Station ISsSUED TO TP—Link Technologies Co., Ltd. Building 24 (floors 1,3,4,5) and 28 (floors1—4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China s Cllaly o BL—SZ1830386—702 SUAmmISH 10W Wireless Fast Charging Station [VfelelAMNETuTS® TL—WCS200 Brand Name: SS ICS@seQleETe® 47 CFR Part 1.1307 47 CFR Part 1.1310 [SeleifpH TEZWCS200 Test Conclusion: MaEES (Chief Engineer) RCS@PEICH Apr. 15, 2018 ~Apr. 13, 2018 Date]bv\‘_'&w& pEpCEATe Jun. 25, 2018 NOTE: This test report can be duplicated completelyfor the legal use with the approval ofthe applicant;it shall not be reproduced except in Jull, without the written approval ofShenzhen BALUN Technology Co., Ltd. BALUN Laboratory. Any objections should be raised within thirty daysfromthe date ofissue. To validate the report, please visit BALUN website. Block B, 1st FL,Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong, P. R. China 518055 TEL: +86—755—66850100, FAX: +86—755—61824271 www.baluntek.com

Report No.: BL-SZ1830386-702 Revision History Version Issue Date Revisions Content Rev. 01 May 29, 2018 Initial Issue Rev. 02 Jun. 25, 2018 Update the Operating Mode on page 5 TABLE OF CONTENTS 1 GENERAL INFORMATION ..................................................................................................................... 3 1.1 Identification of the Testing Laboratory ...................................................................................... 3 1.2 Identification of the Responsible Testing Location ..................................................................... 3 1.3 Test Environment Condition ....................................................................................................... 3 1.4 Announce ................................................................................................................................... 3 2 PRODUCT INFORMATION ..................................................................................................................... 4 2.1 Applicant Information.................................................................................................................. 4 2.2 Manufacturer Information ........................................................................................................... 4 2.3 Factory Information .................................................................................................................... 4 2.4 General Description for Equipment under Test (EUT) ............................................................... 4 2.5 Ancillary Equipment.................................................................................................................... 4 2.6 Technical Information ................................................................................................................. 5 3 STANDARD INFORMATION ................................................................................................................... 6 3.1 Test Standard ............................................................................................................................. 6 3.2 Radiofrequency Radiation Exposure Limit ................................................................................. 6 4 TEST SETUP........................................................................................................................................... 7 4.1 Test Setup Photo........................................................................................................................ 7 4.2 Measurement procedure ............................................................................................................ 7 4.3 Mobile Condition......................................................................................................................... 7 4.4 Test Equipment .......................................................................................................................... 7 4.5 Test Configuration ...................................................................................................................... 8 5 TEST RESULT ........................................................................................................................................ 9 5.1 E-field ......................................................................................................................................... 9 5.2 H-field ......................................................................................................................................... 9 6 Test Conclusion ....................................................................................................................................... 9 6.1 E-field ......................................................................................................................................... 9 6.2 H-field ......................................................................................................................................... 9 2/9

Report No.: BL-SZ1830386-702 1 GENERAL INFORMATION 1.1 Identification of the Testing Laboratory Company Name Shenzhen BALUN Technology Co., Ltd. Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Address Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China. Phone Number +86 755 6685 0100 Fax Number +86 755 6182 4271 1.2 Identification of the Responsible Testing Location Test Location Shenzhen BALUN Technology Co., Ltd. Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Address Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 11524A-1. The laboratory has been listed by US Federal Communications Accreditation Commission to perform electromagnetic emission measurements. Certificate The recognition numbers of test site are 832625. The laboratory is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L6791. All measurement facilities used to collect the measurement data are located at Block B, FL 1, Baisha Science and Technology Park, Description Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 518055 1.3 Test Environment Condition Ambient Temperature 21 to 23 ℃ Ambient Relative 40 to 50% Humidity Ambient Pressure 100 to 102 KPa 1.4 Announce (1) The test report reference to the report template version v1.2. (2) The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. (3) The test report is invalid if there is any evidence and/or falsification. (4) The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. (5) This document may not be altered or revised in any way unless done so by BALUN and all revisions are duly noted in the revisions section. (6) Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. 3/9

Report No.: BL-SZ1830386-702 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant TP-Link Technologies Co., Ltd. Building 24 (floors 1,3,4,5) and 28 (floors1-4) Central Science and Address Technology Park, Shennan Rd, Nanshan, Shenzhen, China 2.2 Manufacturer Information Manufacturer TP-Link Technologies Co., Ltd. Building 24 (floors 1,3,4,5) and 28 (floors1-4) Central Science and Address Technology Park, Shennan Rd, Nanshan, Shenzhen, China 2.3 Factory Information Factory N/A Address N/A 2.4 General Description for Equipment under Test (EUT) EUT Type 10W Wireless Fast Charging Station Model Name Under TL-WCS200 Test Series Model Name N/A Description of Model N/A Name Differentiation Hardware Version N/A Software Version N/A Network and Wireless N/A connectivity 2.5 Ancillary Equipment Note: Not application. 4/9

Report No.: BL-SZ1830386-702 2.6 Technical Information The requirement for the following technical information of the EUT was tested in this report: Operating Mode 110.5kHz~205kHz Antenna Type Coil Antenna About Product The EUT only support the QI technology. Exposure Category General Population/Uncontrolled exposure EUT Stage Mobile Device Type Product Production unit Identical prototype 5/9

Report No.: BL-SZ1830386-702 3 STANDARD INFORMATION 3.1 Test Standard No. Identity Document Title 1 47 CFR Part 1 Practice and Procedure RF Exposure Considerations for Low Power Consumer 2 KDB 680106 D01 Wireless Power Transfer Applications 3.2 Radiofrequency Radiation Exposure Limit Frequency Electric field Magnetic field Power Averaging range strength strength density time (MHz) (V/m) (A/m) (mW / cm 2) (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density NOTE: General Population/Uncontrolled Exposure: Locations where there is the exposure of individuals who have no knowledge or control of their exposure. General population/uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Members of the general public would come under this category when exposure is not employment- related; for example, in the case of a wireless transmitter that exposes persons in its vicinity. Occupational/Controlled Exposure: Locations where there is exposure that may be incurred by persons who are aware of the potential for exposure. In general, occupational/controlled exposure limits are applicable to situations in which persons are exposed as consequence of their employment, who have been made fully aware of the potential for exposure and can exercise control over their exposure. This exposure category is also applicable when the exposure is of a transient nature due to incidental passage through a location where the exposure levels may be higher than the general population/uncontrolled limits, but the exposed person is fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate means. 6/9

Report No.: BL-SZ1830386-702 4 TEST SETUP 4.1 Test Setup Photo Maximum E-field and H-field measurements were made on each of five sides of the EUT that could come in contact with a user. The five sides are defined as follows: Top (A), Left (B), Bottom (C), Right (D), and Front (E). Refer to the test position diagram below. 4.2 Measurement procedure 1. The RF exposure test was performed in anechoic chamber. 2. The measurement probe was placed at test distance (10 cm) which is between the edge of the charger and the geometric center of probe. 3. The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E, F) were completed. 4. The EUT was measured according the dictates of KDB 680106 D01v02. 4.3 Mobile Condition Probe Condition Test Distance (cm) E-field Mobile 10 H-field Mobile 10 4.4 Test Equipment Description Manufacturer Model Serial No. Cal. Date Cal. Due E-field Probe Narda EP601 511WX51129 2016.05.13 2017.05.12 H-field Probe Schaffner EMC-20 1324.11 2016.05.13 2017.05.12 Anechoic Chamber RAINFORD 9m*6m*6m N/A 2016.03.28 2017.03.27 7/9

Report No.: BL-SZ1830386-702 4.5 Test Configuration To check all kinds of possible modes, the EUT was evaluated with appropriate client and under each charging condition as the below table: Test Mode NO. Description The EUT was powered on and there is no client device 1 Idle Mode attached with the EUT. The EUT was charging the client device which has Less than 2 Charging Mode 1 % of battery. The EUT was charging the client device which has Less than 3 Charging Mode 50 % of battery. The EUT was charging the client device which has 100 % of 4 Charging Mode battery. 8/9

Report No.: BL-SZ1830386-702 5 TEST RESULT 5.1 E-field EUT Edges Distance Test A B C D E Limit (cm) Mode (V/m) (V/m) (V/m) (V/m) (V/m) (V/m) 1 11.15 13.35 10.46 10.57 21.06 2 11.26 13.52 10.58 10.75 21.42 10 614.0 3 10.28 12.25 9.66 9.58 20.16 4 10.95 12.77 9.85 10.11 20.25 5.2 H-field EUT Edges Distance Test A B C D E Limit (cm) Mode (A/m) (A/m) (A/m) (A/m) (A/m) (A/m) 1 0.20 0.18 0.15 0.15 0.24 2 0.19 0.18 0.15 0.14 0.25 10 1.63 3 0.19 0.16 0.12 0.14 0.24 4 0.18 0.17 0.12 0.13 0.23 6 Test Conclusion 6.1 E-field EUT Edge Limit 30% Limit Distance Worst-case E Verdict (V/m) (V/m) (cm) Test Mode (V/m) 10 2 21.42 614.0 184.2 Pass 6.2 H-field EUT Edge Limit 30% Limit Distance Worst-case E Verdict (A/m) (A/m) (cm) Test Mode (A/m) 10 2 0.25 1.63 0.49 Pass The E-field and H-field data shown in this report show that the EUT is compliant with the 30% of the MPE limits. --END OF REPORT-- 9/9


Document Created: 2018-06-25 14:41:20
Document Modified: 2018-06-25 14:41:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC