12. FCC SAR Test Report Appendix A. SAR Plots of System Verification

FCC ID: TE7UB400

RF Exposure Info

Download: PDF
FCCID_4263576

Test Laboratory: BTL Inc. Date: 2019/4/24 System Check_B2450_0424 DUT: Dipole 2450 MHz D2450V2;SN:919; Communication System: UID 0, CW (0); Frequency: 2450 MHz; Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.985 S/m; εr = 51.431; ρ = 1000 kg/m3 Ambient Temperature：23.1 ℃; Liquid Temperature：22.1 ℃ DASY Configuration: • Probe: EX3DV4 - SN7396; ConvF(7.7, 7.7, 7.7) @ 2450 MHz; Calibrated: 2018/5/29 • Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 31.0 • Electronics: DAE4 Sn1390; Calibrated: 2018/5/11 • Phantom: SAM Right; Type: Twin SAM; Serial: 1896 • DASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Area Scan (7x7x1): Interpolated grid: dx=12 mm, dy=12 mm Maximum value of SAR (interpolated) = 21.6 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 99.84 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 26.2 W/kg SAR(1 g) = 13.2 W/kg; SAR(10 g) = 6.03 W/kg Maximum value of SAR (measured) = 21.8 W/kg Report No.: BTL-FCC SAR-1-1812C107_Appendix A. Page 1 of 1


Document Created: 2019-05-06 09:03:39
Document Modified: 2019-05-06 09:03:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC