User Manual

FCC ID: TE7P7

Users Manual

Download: PDF
FCCID_4199930

Whole Home Hybrid Mesh Wi-Fi System Seamless Roaming | Parental Controls | Antivirus | Powerline User Guide AC1300+AV600 Whole Home Hybrid Mesh Wi-Fi System Deco P7 1910012360 REV1.0.0

Contents About This Guide············································1 Appearance·······················································2 Set Up Your Deco···········································3 Dashboard··························································5 Wi-Fi Settings···················································6 Parental Controls············································7 Antivirus·······························································8 QoS········································································9 Advanced Features····································10 Online Upgrade·············································13 Managers·························································14

About This Guide This guide provides a brief introduction to Deco Whole Home Hybrid Mesh Wi-Fi System and the Deco app, as well as regulatory information. Please note that features of Deco may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only. Conventions More Info In this guide, the following conventions are used: • Specific product information can be found on the product page at http://www.tp-link.com. Convention Description • A Technical Support Forum is provided for you to discuss our Stands for Deco Whole Home Hybrid Mesh Wi-Fi System/ products at http://forum.tp-link.com. Deco Unit. • Our Technical Support contact information can be found at the Help Hyperlinks are in teal and underlined. You can click to Underline center of the Deco app and the Contact Technical Support page at redirect to a website or a specific section. http://www.tp-link.com/support. Key information appears in teal, including management Teal page text such as menus, items, buttons and so on. Ignoring this type of note might result in a malfunction Note: or damage to the device. Indicates important information that helps you make Tips: better use of your device.

Appearance Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports and a power slot. See the explanation below: Yellow Start up. Blue pulse Deco is ready for setup. Ethernet Ports: For connecting Deco to your modem, the Ethernet outlet or other internet devices. Blue solid Reset Button: Press to reset Deco to factory default Deco is setting up. settings. Power Slot: For connecting Deco to the power socket via Green the provided power adapter. Deco is registered and all is well. Red Deco has an issue. 2

Set Up Your Deco Follow the steps below to set up your Deco Whole Home Hybrid Mesh Wi-Fi system. 1. Download and install the Deco app 2. Log in or sign up with TP-Link ID 3. Connect your modem to Deco Scan the QR code below or go to Google Play Open the app. Use your TP-Link ID to log in. Find and power off your modem. Connect your or the Apple App Store to download the Deco Deco to the modem and power them both on. If you don’t have a TP-Link ID, tap Sign Up. The app. Deco app will guide you through the rest. If you don't have a modem, connect the Install the app on your Android or iOS Ethernet outlet directly to your Deco. smartphone or tablet. or 3

Set Up Your Deco Follow the steps below to set up your Deco Whole Home Hybrid Mesh Wi-Fi system. 4. Select a location 5. Create your Wi-Fi network 6. Add more Decos Select a location for this Deco. If its location Set a network name and a password. These You can add more Decos to expand Wi-Fi is not listed, you can create a new one by will be the name and password you use to coverage. The app will guide you through the choosing Custom. connect your devices to Wi-Fi. process of adding more Decos one by one. 4

Dashboard After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can view the working status of all Decos, test the internet speed, check the connected devices and manage your network. Devices Tab Internet icon to check Deco status Tab the yellow icon to dispaly more features 5

Wi-Fi Settings Customize the network name and password of your main network or create a separate network just for guests. You can set a guest network name and an easy-to-remember password. You can shake your device to share the network details easily with family and friends. Enable Guest Network Create Network Name and Password Shake to Share 6

Parental Controls Create profiles for family members and specify the devices that belong to each. Set individualized parental controls including when and for how long each person can access the internet. Block inappropriate content and pause the internet if necessary. Insights Filter Level Time Controls 7

Antivirus There are three ways Deco ensures your home network remains safe: by blocking malicious websites, by protecting the system and applications against external attacks and eliminating vulnerabilities, and by preventing infected devices from sending sensitive information outside your network. Protection Enabled Alert History Protection Disabled 8

QoS There are two ways to use the QoS (Quality of Service) function. You can prioritize the connection of a particular device for a set duration, such as a family member's laptop for one hour during a video call. You can also prioritize the online activity that's most important to the whole family, such as Streaming or Gaming. Prioritize a Device Prioritize an Activity Customize 9

Advanced Features Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 & IPv6), configure LAN parameters, control Deco's LED and turn notifications off and on, easily create a domain name for your Deco, set up port forwarding rules to make your local computers accessible to other devices over the internet, reserve the same IP address for a specific device, and change the working mode. IPv4 IPv6 LED Control 10

Te—Link DONS © Service Type Custom > Domain Name Service Name myoftice.tplinkdns.com Note:ts recommended not to change which Deco is conneeted to your modem. Othemise, TP—Link DDNS will beaffected. Internal IP Select from Device > External Port DDNS allis you to create a fiendy domsin name that can he used instend of an P address to access your Deco and Iooslresources over theintemet Celorann Internal Port Fassssorbork Protocel All >

Jack‘s iPhone Notifications Enabled Router (Default) taziss0700 y FC Fo 4895—CD F8 Notffeations are enabled. Youl recaive alerts in in rauter made, Reco connects to the intermier the Noifications ber. Disable it onyour daviee‘s cirestly vis Dynamic P,State IP or PPPoEand Setings > Notiicatons na90 stares internataccess to muliple wired or \Wreless devices. NAT and DHCP server are ensbled by default Firmware Updates © New Device Detected © Access Point O Monthly Reports () in access point mode, Daco connects to a wired or wrelass routervia an Ethernet cable and extends the wreless coverage of your euisting network, Funetions ie NT Rarental Gontrols and GaS are not supparted in this made

Online Upgrade TP-Link is dedicated to improving product features and providing a better customer experience. Update Deco when prompted in the Deco app. Update Available Updating Deco Up-to-date 13

Managers Add friends and family members to help manage your network. Each manager should have their own TP-Link ID. Add as Manager Manager List 14

Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2019 TP-Link Technologies Co., Ltd. All rights reserved. 15

FCC Compliance Information Statement Product Name: AC1300+AV600 Whole Home Hybrid Mesh Wi-Fi System Model Number: Deco P7 Component Name Model I.T.E POWER SUPPLY T120120-2B5 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 16

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” FCC Compliance Information Statement Product Name: I.T.E POWER SUPPLY Model Number: T120120-2B5 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 17

E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019-02-22 18

CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2412MHz—2483.5MHz (20dBm) 5150MHz—5250MHz (23dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Attention: This device may only be used indoors in all EU member states and EFTA countries. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 19

2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; 2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. Caution: 1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and The high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: 1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; 2. Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation P.I.R.E spécifiée pour l’exploitation point à point et non point à point, selon le cas. En outre, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5745-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 20

Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended • Do not use the device where wireless devices are not allowed. • Adapter shall be installed near the equipment and shall be easily accessible. • Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't hesitate to contact us. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. For EU/EFTA, this product can be used in the following countries: 21

AT BE BG CH CY CZ DE DK EE EL EF FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO SE SI SK UK Explanation of the symbols on the product label Symbol Explanation DC voltage Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 22


Document Created: 2019-03-12 18:35:43
Document Modified: 2019-03-12 18:35:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC