13. MPE

FCC ID: TE7M5V3

RF Exposure Info

Download: PDF
FCCID_4506506

3UL Report No.: BTL—FCCP—4—1907C037 FCC RF EXPOSURE REPORT FCC ID: TEZMS5V3 Project No. 19070037 Equipment AC 1300 Whole Home Mesh Wi—Fi System Brand Name tp—link Test Model Deco MSR Series Model N/A Applicant TP—Link Technologies Co., Ltd. Address Building 24(floors1,3,4,5) and 28(floors1—4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Manufacturer TP—Link Technologies Co., Ltd. Address Building 24(floors1,3,4,5) and 28(floors1—4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Receipt Jul. 03, 2019 Date of Test Jul. 05, 2019 ~ Sep. 24, 2019 Issued Date Oct. 24, 2019 Report Version ROO Test Sample Engineering Sample No.: DG190703114 Standard(s) FCC Guidelines for Human Exposure IEEE C95.1 FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Kan Xuw Prepared by : Kai Xu {roa Mb iess #a Approved by : Ethan Ma ’, n \‘ [ACCREDITED) Certificate #5123.02 Add: No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Tel: +86—769—8318—3000 Web: www.newbtl.com Page 1 of 5

Report No.: BTL-FCCP-4-1907C037 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue Oct. 24, 2019 Page 2 of 5

3UL Report No.: BTL—FCCP—4—1907C037 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: §z 16_s in 4n‘ where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Antenna Specification: For BT LE: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 N/A Internal N/A 1.40 For 2.4GHz: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 3101502591 Internal Weld 1.30 2 3101502592 Internal Weld 1.30 Note: (1) This EUT supports CDD, and all antennas have the same gain. So, the directional gain = Gayz+Array Gain. For power Directional gain=1.30. For power spectral density measurements, Array Gain=10lo0g (Nant/Nss) dB, that is Directional gain = 1.30+10l0g(2/1)dBi=4.31 (2) For Beamforming Gain: 3.00 dB. So the Directional gain = 3.0+1.30=4.30. For 5GHz: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 15 6 ),"| 4@ 3101502593 Internal I—PEX 0.64 2 15 6 |»,"| 4@ 3101502594 Internal I—PEX 0.64 Note: This EUT supports CDD, and all antennas have the same gain, Directional gain = Gay;+Array Gain, where Array Gain is as follows: (1) For power Directional gain=0.64. For power spectral density measurements, Nayy = 2, Nss = 1. So Directional gain = Gayt + Array Gain =10 log (Nan+/ Nss) dB =0.64+10l0g(2/1)dBi =3.65 dB. (2) For Beamforming Gain: 3.00 dB. So the Directional gain = 3.0+0.64=3.64. Page 3 of 5

Report No.: BTL-FCCP-4-1907C037 2. TEST RESULTS For BT LE: Antenna Antenna Max. Average Max. Average Power Limit of Power Test Gain Gain Output Power Output Power Density (S) Density (S) 2 Result (dBi) (numeric) (dBm) (mW) (mW/cm ) (mW/cm2) 1.40 1.3804 8.76 7.5162 0.00207 1 Complies For 2.4GHz Non Beamforming: Directional Directional Max. Average Max. Average Power Limit of Power Test Gain Gain Output Power Output Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 1.30 1.3490 26.06 403.6454 0.10838 1 Complies For 2.4GHz Beamforming: Directional Directional Max. Average Max. Average Power Limit of Power Test Gain Gain Output Power Output Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 4.30 2.6915 25.54 358.0964 0.19184 1 Complies For 5GHz UNII-1 Non Beamforming: Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 0.64 1.1588 27.32 539.5106 0.12444 1 Complies For 5GHz UNII-3 Non Beamforming: Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 0.64 1.1588 26.07 404.5759 0.09331 1 Complies For 5GHz UNII-1 Beamforming: Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 3.64 2.3121 25.48 353.1832 0.16254 1 Complies For 5GHz UNII-3 Beamforming: Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 3.64 2.3121 25.07 321.3661 0.14789 1 Complies Page 4 of 5

Report No.: BTL-FCCP-4-1907C037 For the max simultaneous transmission MPE: Power Density (S) Power Density (S) Power Density (S) Limit of Power (mW/cm2) (mW/cm2) (mW/cm2) Total Density (S) Test Result BT LE 2.4GHz 5GHz (mW/cm2) 0.00207 0.19184 0.16254 0.35645 1 Complies Note: The calculated distance is 20 cm. Output power including tune up tolerance. End of Test Report Page 5 of 5


Document Created: 2019-11-08 07:57:38
Document Modified: 2019-11-08 07:57:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC