1612066R-FCC-RF Exposure-Wi-Fi Smart Light Switch-HS200-V1.1 20160425

FCC ID: TE7HS200

RF Exposure Info

Download: PDF
FCCID_2971531

RF Exposure Evaluation Declaration Product Name : Smart Wi-Fi Light Switch Model No. : HS200 FCC ID : TE7HS200 Applicant : TP-LINK TECHNOLOGIES CO., LTD. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Receipt : Jan. 30, 2016 Issued Date : Apr. 22, 2016 Report No. : 1612066R-RF-US-P20V01 Report Version : V1.1 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation.

Report No: 1612066R-RF-US-P20V01 Tes t R e p o r t C e r t i f i c a t i o n Issued Date : Apr. 22, 2016 Report No. : 1612066R-RF-US-P20V01 Product Name : Smart Wi-Fi Light Switch Applicant : TP-LINK TECHNOLOGIES CO., LTD. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Manufacturer : TP-LINK TECHNOLOGIES CO., LTD. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Model No. : HS200 FCC ID : TE7HS200 EUT Voltage : AC 100-240V, 50/60Hz Brand Name : TP-LINK Applicable Standard : KDB 447498D01V06 FCC Part1.1310(b) FCC Part2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 Test Result : Complied Performed Location : Quietek Corporation - Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Senior Adm. Specialist: Alice Ni ) Reviewed By : (Senior Engineer: Jack Zhang ) Approved By : (Engineering Manager : Harry Zhao ) Page: 2 of 7

Report No: 1612066R-RF-US-P20V01 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: Taiwan R.O.C. : BSMI, NCC, TAF USA : FCC Japan : VCCI China : CNAS The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/english/about/certificates.aspx?bval=5 The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/index_en.aspx If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : service@quietek.com LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : service@quietek.com Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : service@quietek.com Page: 3 of 7

Report No: 1612066R-RF-US-P20V01 History of This Test Report REPORT NO. VERSION DESCRIPTION ISSUED DATE 1612066R-RF-US-P20V01 V1.0 Initial Issued Report Mar. 09, 2016 1612066R-RF-US-P20V01 V1.1 Modified the EIRP to Apr. 22, 2016 conducted power. Page: 4 of 7

Report No: 1612066R-RF-US-P20V01 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Electric Magnetic Power Average Frequency Field Field Density Time Range (MHz) Strength Strength (mW/cm2) (Minutes) (V/m) (A/m) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Page: 5 of 7

Report No: 1612066R-RF-US-P20V01 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18℃and 78％ RH. 1.3. Test Result of RF Exposure Evaluation Product : Smart Wi-Fi Light Switch Test Item : RF Exposure Evaluation Test Site : AC-6 z Antenna information: Model No. N/A Antenna TP-LINK manufacturer Antenna Delivery 1*TX+1*RX 2*TX+2*RX 3*TX+3*RX Antenna technology SISO Basic MIMO CDD Beam-forming Antenna Type External Dipole PIFA PCB Internal Ceramic Chip Antenna Metal plate type F antenna Antenna Gain 3.28dBi Page: 6 of 7

Report No: 1612066R-RF-US-P20V01 z Output Power into Antenna & RF Exposure Evaluation Distance: 2.4GHz: Maximum Output Power Density at Frequency Band Antenna Gain Test Mode Power to R = 20 cm (MHz) (dBi) Antenna (dBm) (mW/cm2) 802.11b 2412 - 2462 16.52 3.28 0.018999 802.11g 2412 - 2462 20.85 3.28 0.051491 802.11n(20MHz) 2412 - 2462 21.22 3.28 0.056070 802.11n(40MHz) 2422 - 2452 16.35 3.28 0.018270 2 So according to transmission formula: Pd = (Pout*G)/(4*pi*r ) and the power density limit according to KDB 447498D01V06 and FCC Part1.1310(b), the limit is 1mW/cm2 Safety Distance Calculation Formula: The power flux: P*G (θ ,φ ) S= 4*π *r 2 So safety distance as following: P *G r= 4*π *S P = input power of the antenna G = antenna gain relative to an isotropic antenna θ, Ф = elevation and azimuth angles. r = distance from the antenna to the point of investigation Maximum Output Power Limit of Power Frequency Range Safety Distance Test Mode to Density (MHz) r(cm) Antenna S(mW/cm2) (dBm) 802.11n(20MHz) 2412 - 2462 21.22 1 3.25 Note: The safety distance is 3.25cm for the router without any other radio equipment. The End Page: 7 of 7


Document Created: 2016-04-22 11:32:23
Document Modified: 2016-04-22 11:32:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC