13. MPE rev1

FCC ID: TE7HC220G1

RF Exposure Info

Download: PDF
FCCID_4089246

FCC RF EXPOSURE REPORT FCC ID: TE7HC220G1 Project No. : 1808C052 Equipment : AC1300 Home Wi-Fi System Test Model : HC220-G1 Series Model : M53 Applicant : TP-Link Technologies Co., Ltd. Address : Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China According: : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FCCP-3-1808C052 Page 1 of 7 Report Version: R01

1. CERTIFICATION Equipment :AC1300 Home Wi-Fi System Brand Name : tp-link Test Model : HC220-G1 Series Model : M53 Applicant : TP-Link Technologies Co., Ltd. Manufacturer : TP-Link Technologies Co., Ltd. Address : Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China Date of Test : Aug. 14, 2018 ~ Oct. 23, 2018 Engineering Sample No.: D180806696 for Conducted, D180806693 for Test Sample : Radiated. Standards : FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-3-1808C052) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of A2LA according to the ISO-17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-3-1808C052 Page 2 of 7 Report Version: R01

2. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna For 2.4G: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A Internal N/A 3.71 2 N/A N/A Internal N/A 3.71 Note: This EUT supports CDD, and all antennas have the same gain, (1) For Non Beamforming function, Directional gain=GANT+Array Gain, For power spectral density measurements, Array Gain=10log(NANT/NSS) dB that is Directional gain=3.71+10log(2/1)=6.72. So, the power density limit is 8-6.72+6=7.28. (2) For Beamforming function, Beamforming gain: 3dBi,so Directional gain=3+3.71=6.71dBi. Then, the average output power limit is 30-6.71+6=29.29. The power density limit is 8-6.71+6=7.29.. Report No.: BTL-FCCP-3-1808C052 Page 3 of 7 Report Version: R01

For 5G: Ant. Brand Model Name Antenna Type Connector Gain (dBi) Note 1 N/A N/A Internal N/A 4.17 UNII-1 1 N/A N/A Internal N/A 4.78 UNII-3 2 N/A N/A Internal N/A 4.17 UNII-1 2 N/A N/A Internal N/A 4.78 UNII-3 Note: This EUT supports CDD, and all antennas have the same gain,so, (1) For Non Beamforming function, Directional gain=GANT+Array Gain, For power spectral density measurements, Array Gain=10log(NANT/NSS) dB UNII-1 Directional gain= 4.17+10log(2/1) =7.18. So, the power density limit is 17-7.18+6=15.82. UNII-3 Directional gain=4.78+10log(2/1)=7.79. So, the power density limit is 30-7.79+6=28.21. (2)For Beamforming function, Beamforming gain: 3dBi, So, UNII-1 Directional gain=3+4.17=7.17dBi. Then, the output power limit is 30-7.17+6=28.83. The power density limit is 17-7.17+6=15.83 . UNII-3 Directional gain=3+4.78=7.78dBi. Then, the output power limit is 30-7.78+6=28.22. The power density limit is 30-7.78+6=28.22 . . Report No.: BTL-FCCP-3-1808C052 Page 4 of 7 Report Version: R01

For 2.4G: The worst case for 2TX as follow: Operating Mode 2TX TX Mode 802.11b V (ANT 1+ANT 2) 802.11g V (ANT 1+ANT 2) 802.11n(20 MHz) V (ANT 1+ANT 2) 802.11n(40 MHz) V (ANT 1+ANT 2) vht(20 MHz) V (ANT 1+ANT 2) vht(40 MHz) V (ANT 1+ANT 2) For 5G: The worst case for 2TX as follow: Operating Mode 2TX TX Mode 802.11a V (ANT 1+ANT 2) 802.11n (20 MHz) V (ANT 1+ANT 2) 802.11n (40 MHz) V (ANT 1+ANT 2) 802.11ac (20 MHz) V (ANT 1+ANT 2) 802.11ac (40 MHz) V (ANT 1+ANT 2) 802.11ac (80 MHz) V (ANT 1+ANT 2) Report No.: BTL-FCCP-3-1808C052 Page 5 of 7 Report Version: R01

3. TEST RESULTS 2.4G WIFI Non Beamforming: Directional Directional Average Average Power Limit of Power Test gain gain Output Power Output Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 6.72 4.6989 22.98 198.6095 0.1858 1 Complies 2.4G WIFI Beamforming: Directional Directional Average Average Power Limit of Power Test gain gain Output Power Output Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 6.71 4.6881 22.69 185.7804 0.1734 1 Complies 5G Band UNII-1 Non Beamforming: Directional Directional Power Limit of Power Peak Output Peak Output Test gain gain Density (S) Density (S) Power (dBm) Power (mW) Result (dBi) (numeric) (mW/cm2) (mW/cm2) 7.18 5.2240 23.02 200.4472 0.2084 1 Complies 5G Band UNII-3 Non Beamforming: Directional Directional Power Limit of Power Peak Output Peak Output Test gain gain Density (S) Density (S) Power (dBm) Power (mW) Result (dBi) (numeric) (mW/cm2) (mW/cm2) 7.79 6.0117 23.12 205.1162 0.2454 1 Complies 5G Band UNII-1 Beamforming: Directional Directional Power Limit of Power Peak Output Peak Output Test gain gain Density (S) Density (S) Power (dBm) Power (mW) Result (dBi) (numeric) (mW/cm2) (mW/cm2) 7.17 5.2119 22.71 186.6380 0.1936 1 Complies 5G Band UNII-3 Beamforming: Directional Directional Power Limit of Power Peak Output Peak Output Test gain gain Density (S) Density (S) Power (dBm) Power (mW) Result (dBi) (numeric) (mW/cm2) (mW/cm2) 7.78 5.9979 22.8 190.5461 0.2275 1 Complies Report No.: BTL-FCCP-3-1808C052 Page 6 of 7 Report Version: R01

For the max simultaneous transmission MPE: Power Density (S) Power Density (S) Limit of Power (mW/cm2) (mW/cm2) Total Density (S) Test Result 2.4G 5G (mW/cm2) 0.1858 0.2454 0.4312 1 Complies Note: the calculated distance is 20 cm. End of Test Report Report No.: BTL-FCCP-3-1808C052 Page 7 of 7 Report Version: R01


Document Created: 2019-03-26 12:30:08
Document Modified: 2019-03-26 12:30:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC