12. Test Report_FCC Transmit Simultaneously_Rev0614

FCC ID: TE7EC440-G4U

Test Report

Download: PDF
FCCID_4343618

A _ BSpminde mo 3CL 5mm %C FCC Radio Test Report FCC ID: TE7ZEC440—G4U This report concerns: Original Grant Project No. : 18120143 Equipment : AC2600 Wireless Dual Band Gigabit Router Test Model : EC440—G4u Series Model : N/A Applicant : TP—Link Technologies Co., Ltd. Address : TP—Link Technologies Co., Ltd.Building 24 (floors 1,3,4,5) and 28 (floors1—4),CentralScience and Technology Park,Nanshan Shenzhen,518057China Date of Receipt : 2018/12/24 Date of Test : 2018/12/24 ~ 2019/4/18 Issued Date : 2019/6/11 Tested by : BTL Inc. Testing Engineer : /W " ‘ _‘ (Tim Lge ) Technical Manager : fl Le/ Z/‘./\/ (Pike Lee) Authorized Signatory : /}(‘/"\ Lé\ YAndy $hiu) B TL I N C . No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) TEL: +886—2—2657—3299 FAX: +886—2—2657—3331 \\‘\uw, (\ \> *4 is\ $\._/ & \./ /—\ \—) Zzzan Testing Luboratory as "/,,;,,m\‘\\ 0cso Report No.: BTL—FCCP—3—18120C143 Page 1 of 30 Report Version: RO1

Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-3-1812C143 Page 2 of 30 Report Version: R01

CONTENTS REPORT ISSUED HISTORY 4 1 CERTIFICATION 5 2 SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 GENERAL INFORMATION 8 3.1 DESCRIPTION OF EUT 8 3.2 TEST MODES 11 3.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.4 SUPPORT UNITS 12 4 RADIATED EMISSIONS TEST 13 4.1 LIMIT 13 4.2 TEST PROCEDURE 14 4.3 DEVIATION FROM TEST STANDARD 14 4.4 TEST SETUP 15 4.5 EUT OPERATING CONDITIONS 15 4.6 TEST RESULT 15 5 LIST OF MEASURING EQUIPMENTS 16 6 EUT TEST PHOTO 17 APPENDIX A RADIATED EMISSIONS 18 Report No.: BTL-FCCP-3-1812C143 Page 3 of 30 Report Version: R01

REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. 2019/5/31 R01 Revised report to address TCB’s comments. 2019/6/11 Report No.: BTL-FCCP-3-1812C143 Page 4 of 30 Report Version: R01

1 CERTIFICATION Equipment : AC2600 Wireless Dual Band Gigabit Router Brand Name : tp-link Test Model : EC440-G4u Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Manufacturer : TP-Link Technologies Co., Ltd. Address : Building 24 (floors 1,3,4,5) and 28 (floors1-4),CentralScience and Technology Park,Nanshan Shenzhen,518057China Date of Test : 2018/12/24 ~ 2019/4/18 Test Sample : Engineering Sample Standard(s) : FCC Part15, Subpart C (15.247) FCC Part15, Subpart E (15.407) ANSI C63.10-2013 The above equipment has been tested and found in compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-3-1812C143) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO/IEC 17025 quality assessment standard and technical standard(s). Test results included in this report is only for the Transmit Simultaneously part. Report No.: BTL-FCCP-3-1812C143 Page 5 of 30 Report Version: R01

2 SUMMARY OF TEST RESULTS Test procedures according to the technical standards. FCC Part15, Subpart C (15.247), FCC Part15, Subpart E (15.407) FCC Clause No Description Test Result Judgement Remark 15.205 15.209 Radiated Emissions APPENDIX A Pass ------ 15.247(d) 15.407(b) NOTE: (1) ”N/A” denotes test is not applicable in this Test Report. Report No.: BTL-FCCP-3-1812C143 Page 6 of 30 Report Version: R01

2.1 TEST FACILITY The test facilities used to collect the test data in this report: CB15: (VCCI RN: G-20031; FCC RN:674415; FCC DN:TW0659) No. 68-1, Ln. 169, Sec. 2, Datong Rd., Xizhi Dist., New Taipei City 221, Taiwan (R.O.C.) 2.2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2. The BTL measurement uncertainty is less than the CISPR 16-4-2 Ucispr requirement. The reported uncertainty of measurement y ± U, where expanded uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. A. Radiated emissions above 1 GHz test: Ant. Test Site Method Measurement Frequency Range U (dB) H/V 1 GHz ~ 6 GHz V 4.46 CB15 1 GHz ~ 6 GHz H 4.40 CISPR (3m) 6 GHz ~18 GHz V 3.88 6 GHz ~18 GHz H 4.00 Test Site Method Measurement Frequency Range U (dB) CB15 18 GHz ~ 26.5 GHz 4.62 CISPR (1m) 26.5 GHz ~ 40 GHz 5.12 NOTE: Unless specifically mentioned, the uncertainty of measurement has not been taken into account to declare the compliance or non-compliance to the specification. Our calculated Measurement Instrumentation Uncertainty is shown in the tables above. These are our Ulab values in CISPR 16-4-2 terminology. Since Table 1 of CISPR 16-4-2 has values of measurement instrumentation uncertainty, called UCISPR, as follows: Conducted Disturbance (mains port) – 150 kHz – 30 MHz : 3.6 dB Radiated Disturbance (electric field strength on an open area test site or alternative test site) – 30 MHz – 1000 MHz : 5.2 dB Report No.: BTL-FCCP-3-1812C143 Page 7 of 30 Report Version: R01

3 GENERAL INFORMATION 3.1 DESCRIPTION OF EUT Equipment AC2600 Wireless Dual Band Gigabit Router Brand Name tp-link Test Model EC440-G4u Series Model N/A Model Difference N/A Power Source DC Voltage supplied from AC/DC adapter. I/P: 100-240V~50/60Hz, 1.5A Power Rating O/P: 12.0V    3300mA For WLAN Operation Frequency 2412 MHz to 2462 MHz IEEE 802.11b: DSSS IEEE 802.11g: OFDM Modulation Type IEEE 802.11n: OFDM IEEE VHT: 1024-QAM IEEE 802.11b: 11/5.5/2/1 Mbps IEEE 802.11g: 54/48/36/24/18/12/9/6 Mbps Bit Rate of Transmitter IEEE 802.11n: up to 600 Mbps IEEE VHT: up to 800 Mbps IEEE 802.11b: 29.01 dBm (0.7962 W) IEEE 802.11g: 29.59 dBm (0.9106 W) IEEE 802.11n (HT20): 29.70 dBm (0.9339 W) Maximum Output Power IEEE 802.11n (HT40): 26.34 dBm (0.4304 W) IEEE VHT (VHT20): 29.65 dBm (0.9230 W) IEEE VHT (VHT40): 26.28 dBm (0.4250 W) For RLAN UNII-1: 5180 MHz to 5240 MHz Operation Frequency UNII-3: 5745 MHz to 5825 MHz Modulation Type OFDM Bit Rate of Transmitter up to 1733 Mbps IEEE 802.11a: 22.53 dBm (0.1791 W) IEEE 802.11n (HT20): 22.61 dBm (0.1826 W) Maximum Output Power IEEE 802.11n (HT40): 25.53 dBm (0.3574 W) for UNII-1 IEEE 802.11ac (VHT20): 22.60 dBm (0.1818 W) For CDD mode IEEE 802.11ac (VHT40): 25.29 dBm (0.3378 W) IEEE 802.11ac (VHT80): 21.02 dBm (0.1265 W) Maximum Output Power IEEE 802.11ac (VHT20): 21.56 dBm (0.1432 W) for UNII-1 IEEE 802.11ac (VHT40): 23.84 dBm (0.2423 W) For beamforming mode IEEE 802.11ac (VHT80): 21.02 dBm (0.1265 W) IEEE 802.11a: 29.37 dBm (0.8650 W) IEEE 802.11n (HT20): 29.25 dBm (0.8406 W) Maximum Output Power IEEE 802.11n (HT40): 29.20 dBm (0.8318 W) for UNII-3 IEEE 802.11ac (VHT20): 29.17 dBm (0.8260 W) For CDD mode IEEE 802.11ac (VHT40): 29.15 dBm (0.8223W) IEEE 802.11ac (VHT80): 27.02 dBm (0.5031 W) Maximum Output Power IEEE 802.11ac (VHT20): 23.94 dBm (0.2478 W) for UNII-3 IEEE 802.11ac (VHT40): 23.66 dBm (0.2321W) For beamforming mode IEEE 802.11ac (VHT80): 23.45 dBm (0.2214 W) Product Covered 1 * Adapter: SO48CU1200330 Report No.: BTL-FCCP-3-1812C143 Page 8 of 30 Report Version: R01

NOTE: (1) For a more detailed features description, please refer to the manufacturer’s specifications or the user's manual. (2) Channel List: For WLAN CH01 - CH11 for IEEE 802.11b/g/n (HT20)/VHT (VHT20) CH03 - CH09 for IEEE 802.11n (HT40)/VHT (VHT40) Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 01 2412 05 2432 09 2452 02 2417 06 2437 10 2457 03 2422 07 2442 11 2462 04 2427 08 2447 For RLAN UNII-1 IEEE 802.11a IEEE 802.11n (HT40) IEEE 802.11n (HT20) IEEE 802.11ac (VHT80) IEEE 802.11ac (VHT40) IEEE 802.11ac (VHT20) Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 36 5180 38 5190 42 5210 40 5200 46 5230 44 5220 48 5240 UNII-3 IEEE 802.11a IEEE 802.11n (HT40) IEEE 802.11n (HT20) IEEE 802.11ac (VHT80) IEEE 802.11ac (VHT40) IEEE 802.11ac (VHT20) Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 149 5745 151 5755 155 5775 153 5765 159 5795 157 5785 161 5805 165 5825 Report No.: BTL-FCCP-3-1812C143 Page 9 of 30 Report Version: R01

(3) Table for Filed Antenna: For WLAN Ant. Brand Model Type Connector Gain (dBi) 1 TP-Link 3101502192 PCB I-PEX 3.77 2 TP-Link 3101502193 PCB I-PEX 5.00 3 TP-Link 3101502194 PCB I-PEX 4.49 4 TP-Link 3101502195 PCB I-PEX 5.65 NOTE: (a) The EUT incorporates a MIMO function. Physically, the EUT provides two completed transmitters and receivers (4T4R). 2.4 GHz and 5GHz can transmit simultaneously. (b) The WLAN 2.4 GHz does not support beamforming function. For RLAN UNII-1: Ant. Brand Model Type Connector Gain (dBi) 1 TP-Link 3101502192 PCB I-PEX 4.8 2 TP-Link 3101502193 PCB I-PEX 5.09 3 TP-Link 3101502194 PCB I-PEX 4.64 4 TP-Link 3101502195 PCB I-PEX 4.83 UNII-3: Ant. Brand Model Type Connector Gain (dBi) 1 TP-Link 3101502192 PCB I-PEX 5.4 2 TP-Link 3101502193 PCB I-PEX 5.66 3 TP-Link 3101502194 PCB I-PEX 4.67 4 TP-Link 3101502195 PCB I-PEX 6.47 NOTE: (a) The EUT incorporates a MIMO function. Physically, the EUT provides two completed transmitters and receivers (4T4R). 2.4 GHz and 5GHz can transmit simultaneously. (b) The EUT UNII-1 (AC mode) and UNII-3 (AC mode) are with beamforming function. Report No.: BTL-FCCP-3-1812C143 Page 10 of 30 Report Version: R01

3.2 TEST MODES The test system was pre-tested based on the consideration of all possible combinations of EUT operation mode. Following mode(s) as (were) found to be the worst case(s) and selected for the final test. Radiated emissions test Test Mode Description TX B MODE CHANNEL 11 + 1 UNII-1_TX AC (VHT80) MODE CHANNEL 42 UNII-1_TX AC (VHT80) MODE CHANNEL 42 + 2 TX B MODE CHANNEL 11 NOTE: (1) For radiated emission tests, the highest output powers were set for final test. (2) The EUT was programmed to be in continuously transmitting mode and the transmit duty cycle is not less than 98 %. Report No.: BTL-FCCP-3-1812C143 Page 11 of 30 Report Version: R01

3.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED Equipment letters and Cable numbers refer to item numbers described in the tables of clause 3.4. 3.4 SUPPORT UNITS Item Equipment Brand Model No. Series No. - - - - - Item Cable Type Shielded Ferrite Core Length 1 Power cable NO NO 1.2m 2 LAN Cable NO NO 5m Report No.: BTL-FCCP-3-1812C143 Page 12 of 30 Report Version: R01

4 RADIATED EMISSIONS TEST 4.1 LIMIT In case the emission fall within the restricted band specified on 15.205, then the 15.209 limit in the table below has to be followed. LIMITS OF RADIATED EMISSIONS MEASUREMENT (9 kHz to 1000 MHz) Frequency Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009~0.490 2400/F(KHz) 300 0.490~1.705 24000/F(KHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 960~1000 500 3 NOTE: (1) The limit for radiated test was performed according to FCC Part 15, Subpart C. (2) The tighter limit applies at the band edges. (3) Emission level (dBuV/m)=20log Emission level (uV/m). (4) The test result calculated as following: Measurement Value = Reading Level + Correct Factor Correct Factor = Antenna Factor + Cable Loss - Amplifier Gain(if use) Margin Level = Measurement Value - Limit Value LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS Radiated Emissions Frequency Measurement Distance (dBuV/m) (MHz) (meters) Peak Average Above 1000 74 54 3 Frequency EIRP Limit Equivalent Field Strength at 3m (MHz) (dBm) (dBµV/m) 5150-5250 -27 68.3 5250-5350 -27 68.3 5470-5725 -27 68.3 -27 (NOTE 2) 68.3 10 (NOTE 2) 105.3 5725-5850 15.6 (NOTE 2) 110.9 27 (NOTE 2) 122.3 NOTE: (1) The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: µV/m, where P is the eirp (Watts) (2) According to FCC 16-24,All emissions shall be limited to a level of -27 dBm/MHz at 75 MHz or more above or below the band edge increasing linearly to 10 dBm/MHz at 25 MHz above or below the band edge, and from 25 MHz above or below the band edge increasing linearly to a level of 15.6 dBm/MHz at 5 MHz above or below the band edge, and from 5 MHz above or below the band edge increasing linearly to a level of 27 dBm/MHz at the band edge. Report No.: BTL-FCCP-3-1812C143 Page 13 of 30 Report Version: R01

(3) The test result calculated as following: Measurement Value = Reading Level + Correct Factor Correct Factor = Antenna Factor + Cable Loss - Amplifier Gain(if use) Margin Level = Measurement Value - Limit Value Sample calculations: (Refer to page 19, test result No.3.) Reading Level Correct Factor Measurement Value 31.65 + 31.18 = 62.83 Measurement Value Limit Value Margin Level 62.83 - 74 = -11.17 4.2 TEST PROCEDURE a. The measuring distance of 3 m shall be used for measurements. The EUT was placed on the top of a rotating table 1.5 meter above the ground at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The height of the equipment or of the substitution antenna shall be 1.5 m, the height of the test antenna shall vary between 1 m to 4 m. Both horizontal and vertical polarizations of the antenna are set to make the measurement. c. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights find the maximum reading (used Bore sight function). d. The receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1GHz. e. The initial step in collecting radiated emission data is a receiver peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured. f. All readings are Peak Mode value unless otherwise stated AVG in column of Note. If the Peak Mode Measured value compliance with the Peak Limits and lower than AVG Limits, the EUT shall be deemed to meet both Peak & AVG Limits and then only Peak Mode was measured, but AVG Mode didn‘t perform. g. For the actual test configuration, please refer to the related Item –EUT Test Photos. 4.3 DEVIATION FROM TEST STANDARD No deviation. Report No.: BTL-FCCP-3-1812C143 Page 14 of 30 Report Version: R01

4.4 TEST SETUP Absorbers 1-4 m 3m EUT 0.7 m 0.8 m 1m Absorbers 0.3 m Ground Plane Receiver Amp. 4.5 EUT OPERATING CONDITIONS The EUT was programmed to be in continuously transmitting mode. 4.6 TEST RESULT Temperature: 23 °C Relative Humidity: 70 % Test Voltage: AC 120V/50Hz Please refer to the APPENDIX A. REMARK: (1) No limit: This is fundamental signal, the judgment is not applicable. For fundamental signal judgment was referred to Peak output test. Report No.: BTL-FCCP-3-1812C143 Page 15 of 30 Report Version: R01

5 LIST OF MEASURING EQUIPMENTS Radiated Emissions Item Kind of Equipment Manufacturer Type No. Serial No. Calibrated until 2019/4/15 1 Preamplifier EMCI 012645B 980267 2020/4/3 2019/4/15 2 Preamplifier EMCI EMC02325 980217 2020/4/3 2019/4/15 3 Preamplifier EMCI EMC2654045 980030 2020/4/3 EMC104-SM-SM- 2019/4/15 4 Test Cable EMCI 8m 8000 2020/4/3 EMC104-SM-SM- 2019/4/15 5 Test Cable EMCI 150207 800 2020/4/3 EEMC104-SM-S 2019/4/15 6 Test Cable EMCI 151205 M-3000 2020/4/3 2019/3/26 7 MXE EMI Receiver Agilent N9038A MY55420127 2020/3/15 8 Signal Analyzer Agilent N9010A MY52220990 2019/5/22 9 Loop Ant EMCO 6502 42960 2019/5/3 SCHWARZBEC 10 Horm Ant BBHA 9120D 9120D-1342 2019/5/2 K 11 Horm Ant Schwarzbeck BBHA 9170 187 2019/8/16 Trilog-Broadband 2019/3/22 12 Schwarzbeck VULB 9168 9168-548 Antenna 2020/3/10 2019/3/22 13 5dB Attenuator EMCI EMCI-N-6-05 AT-N0623 2020/3/10 Remark: “N/A” denotes no model name, no serial no. or no calibration specified. All calibration period of equipment list is one year. Report No.: BTL-FCCP-3-1812C143 Page 16 of 30 Report Version: R01

6 EUT TEST PHOTO Radiated Emissions Test Photos Report No.: BTL-FCCP-3-1812C143 Page 17 of 30 Report Version: R01

APPENDIX A RADIATED EMISSIONS Report No.: BTL-FCCP-3-1812C143 Page 18 of 30 Report Version: R01

TX B MODE CHANNEL 11 + Test Mode UNII-1_TX AC (VHT80) MODE CHANNEL 42 Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-3-1812C143 Page 19 of 30 Report Version: R01

TX B MODE CHANNEL 11 + Test Mode UNII-1_TX AC (VHT80) MODE CHANNEL 42 Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-3-1812C143 Page 20 of 30 Report Version: R01

TX B MODE CHANNEL 11 + Test Mode UNII-1_TX AC (VHT80) MODE CHANNEL 42 Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-3-1812C143 Page 21 of 30 Report Version: R01

TX B MODE CHANNEL 11 + Test Mode UNII-1_TX AC (VHT80) MODE CHANNEL 42 Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-3-1812C143 Page 22 of 30 Report Version: R01

TX B MODE CHANNEL 11 + Test Mode UNII-1_TX AC (VHT80) MODE CHANNEL 42 Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-3-1812C143 Page 23 of 30 Report Version: R01

TX B MODE CHANNEL 11 + Test Mode UNII-1_TX AC (VHT80) MODE CHANNEL 42 Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-3-1812C143 Page 24 of 30 Report Version: R01

UNII-1_TX AC (VHT80) MODE CHANNEL 42 + Test Mode TX B MODE CHANNEL 11 Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-3-1812C143 Page 25 of 30 Report Version: R01

UNII-1_TX AC (VHT80) MODE CHANNEL 42 + Test Mode TX B MODE CHANNEL 11 Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-3-1812C143 Page 26 of 30 Report Version: R01

UNII-1_TX AC (VHT80) MODE CHANNEL 42 + Test Mode TX B MODE CHANNEL 11 Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-3-1812C143 Page 27 of 30 Report Version: R01

UNII-1_TX AC (VHT80) MODE CHANNEL 42 + Test Mode TX B MODE CHANNEL 11 Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-3-1812C143 Page 28 of 30 Report Version: R01

UNII-1_TX AC (VHT80) MODE CHANNEL 42 + Test Mode TX B MODE CHANNEL 11 Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-3-1812C143 Page 29 of 30 Report Version: R01

UNII-1_TX AC (VHT80) MODE CHANNEL 42 + Test Mode TX B MODE CHANNEL 11 Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. End of Test Report Report No.: BTL-FCCP-3-1812C143 Page 30 of 30 Report Version: R01


Document Created: 2019-07-04 07:28:51
Document Modified: 2019-07-04 07:28:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC