13. MPE

FCC ID: TE7EC330G5U

RF Exposure Info

Download: PDF
FCCID_4120431

FCC RF EXPOSURE REPORT FCC ID: TE7EC330G5U Project No. : 1808C222 Equipment : AC1900 Wireless Dual Band Gigabit Router Test Model : EC330-G5u Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Address : Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China According: : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FCCP-3-1808C222 Page 1 of 6 Report Version: R00

1. GENERAL SUMMARY Equipment :AC1900 Wireless Dual Band Gigabit Router Brand Name : tp-link Test Model : EC330-G5u Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Manufacturer : TP-Link Technologies Co., Ltd. Address : Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park, Nanshan Shenzhen, 518057 China Date of Test : Aug. 28, 2018 ~ Nov. 14, 2018 Test Sample : Engineering Sample No.: D180807220 Standards : FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-3-1808C222) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of A2LA according to the ISO/IEC 17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-3-1808C222 Page 2 of 6 Report Version: R00

2. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna For 2.4G: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 3101501579 Dipole I-PEX 1.98 2 3101501578 Dipole I-PEX 1.98 3 3101501578 Dipole I-PEX 1.98 4 3101501724 PCB IPEX 1.95 Note: This EUT supports MIMO 4X4, any transmit signals are correlated with each other, so Directional gain =10log[(10G1/20+10G2/20+...10GN/20)2/N]dBi, that is Directional gain=10log[(101.98/20+101.98/20+101.98/20+101.95/20)2/4]dBi =7.99. So, the average output power limit is 30-7.99+6=28.01, the power density limit is 8-7.99+6=6.01. Report No.: BTL-FCCP-3-1808C222 Page 3 of 6 Report Version: R00

For 5G: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 3101501579 Dipole I-PEX 1.98 2 3101501578 Dipole I-PEX 1.98 3 3101501578 Dipole I-PEX 1.98 4 3101501724 PCB IPEX 1.84 Note: This EUT supports MIMO 4X4, any transmit signals are correlated with each other,So, (1) For Non Beamforming function, Directional gain =10log[(10G1/20+10G2/20+...10GN/20)2/N]dBi, that is Directional gain=10log[(101.98/20+101.98/20+101.98/20+101.84/20)2/4]dBi=7.97dBi. For UNII-1, the output power limit is 30-7.97+6=28.03, the power density limit is 17-7.97+6=15.03. For UNII-3, the output power limit is 30-7.97+6=28.03, the power density limit is 30-7.97+6=28.03. (2) For Beamforming function, Beamforming gain: 6.02dBi. So Directional gain=6.02+1.98=8dBi. For UNII-1, the output power limit is 30-8+6=28.00, the power density limit is 17-8+6=15.00 . For UNII-3, the output power limit is 30-8+6=28.00, the power density limit is 30-8+6=28.00 . Report No.: BTL-FCCP-3-1808C222 Page 4 of 6 Report Version: R00

For 2.4G: The worst case for 4TX as follow: Operating Mode 4TX TX Mode 802.11b V (ANT 1+ANT 2+ ANT 3+ANT 4) 802.11g V (ANT 1+ANT 2+ ANT 3+ANT 4) 802.11n(20 MHz) V (ANT 1+ANT 2+ ANT 3+ANT 4) 802.11n(40 MHz) V (ANT 1+ANT 2+ ANT 3+ANT 4) vht (20 MHz) V (ANT 1+ANT 2+ ANT 3+ANT 4) vht (40 MHz) V (ANT 1+ANT 2+ ANT 3+ANT 4) For 5G: The worst case for 4TX as follow: Operating Mode 4TX TX Mode 802.11a V (ANT 1+ANT 2+ ANT 3+ANT 4) 802.11n (20 MHz) V (ANT 1+ANT 2+ ANT 3+ANT 4) 802.11n (40 MHz) V (ANT 1+ANT 2+ ANT 3+ANT 4) 802.11ac (20 MHz) V (ANT 1+ANT 2+ ANT 3+ANT 4) 802.11ac (40 MHz) V (ANT 1+ANT 2+ ANT 3+ANT 4) 802.11ac (80 MHz) V (ANT 1+ANT 2+ ANT 3+ANT 4) Report No.: BTL-FCCP-3-1808C222 Page 5 of 6 Report Version: R00

3. TEST RESULTS 2.4G Directional Directional Average Average Power Limit of Power Test gain gain Output Power Output Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 7.99 6.2951 25.87 386.3670 0.48412 1 Complies 5G Band UNII-1 Non Beamforming: Directional Directional Average Average Power Limit of Power Test gain gain Output Power Output Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 7.97 6.2661 25.11 324.3396 0.40453 1 Complies 5G Band UNII-3 Non Beamforming: Directional Directional Average Average Power Limit of Power Test gain gain Output Power Output Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 7.97 6.2661 25.94 392.6449 0.48972 1 Complies 5G Band UNII-1 Beamforming: Directional Directional Average Average Power Limit of Power Test gain gain Output Power Output Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 8 6.3096 25.93 391.7419 0.49198 1 Complies 5G Band UNII-3 Beamforming: Directional Directional Average Average Power Limit of Power Test gain gain Output Power Output Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 8 6.3096 25.90 389.0451 0.48860 1 Complies For the max simultaneous transmission MPE: Power Density (S) Power Density (S) Limit of Power (mW/cm2) (mW/cm2) Total Density (S) Test Result 2.4G 5G (mW/cm2) 0.48412 0.49198 0.9761 1 Complies Note: the calculated distance is 20 cm. End of Test Report Report No.: BTL-FCCP-3-1808C222 Page 6 of 6 Report Version: R00


Document Created: 2018-12-18 17:50:08
Document Modified: 2018-12-18 17:50:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC