12. FCC MPE

FCC ID: TE7E4

RF Exposure Info

Download: PDF
FCCID_4182853

               FCC RF EXPOSURE REPORT
                                  FCC ID: TE7E4


      Project No.     : 1812C106
      Equipment       : AC1200 Whole Home Mesh Wi-Fi System
      Test Model      : Deco E4R
      Series Model    : Deco W2400
      Applicant       : TP-Link Technologies Co., Ltd.
      Address         : Building 24(floors1,3,4,5) and 28(floors1-4)
                        Central Science and Technology Park,
                        Shennan Rd, Nanshan, Shenzhen, China

      According:      : FCC Guidelines for Human Exposure IEEE
                        C95.1 & FCC Part 2.1091




                   BTL                    INC.
         No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan,
                            Guangdong, China.
            TEL: +86-769-8318-3000     FAX: +86-769-8319-6000




Report No.: BTL-FCCP-3-1812C106                                        Page 1 of 4
                                                                 Report Version: R00


  1. GENERAL SUMMARY

      Equipment :       AC1200 Whole Home Mesh Wi-Fi System
      Brand Name :      tp-link
      Test Model :      Deco E4R
      Series Model :    Deco W2400
      Applicant    :    TP-Link Technologies Co., Ltd.
      Manufacturer :    TP-Link Technologies Co., Ltd.
      Address      :    Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology
                        Park, Shennan Rd, Nanshan, Shenzhen, China
      Factory       :   TP-Link Technologies Co., Ltd.
      Address       :   Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology
                        Park, Shennan Rd, Nanshan, Shenzhen, China
      Date of Test :    Dec. 18, 2018 ~ Jan. 10, 2019
      Test Sample :     Engineering Sample No.: D181211652
      Standards    :    FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C

   The above equipment has been tested and found compliance with the requirement of the relative
   standards by BTL Inc.
   The test data, data evaluation, and equipment configuration contained in our test report (Ref No.
   BTL-FCCP-3-1812C106) were obtained utilizing the test procedures, test instruments, test sites
   that has been accredited by the Authority of A2LA according to the ISO/IEC 17025 quality
   assessment standard and technical standard(s).




Report No.: BTL-FCCP-3-1812C106                                                          Page 2 of 4
                                                                                   Report Version: R00


                                                                                                                 el


                                                                                                                           Ee Rpsietee
                                                                                                                 w
                                                                                                                 /m
                                                                                                         C@l
3LL




                                                                                                                      #3 q &®
                                                                                                            \p
                                                                                                         , SS
  2. MPE CALCULATION METHOD

            Calculation Method of RF Safety Distance:

           S   . 16EP
                   4p 4n‘

           where:
           S   =   power density
           P   =   power input to the antenna
           G   =   power gain of the antenna in the direction of interest relative to an isotropic radiator
           R   =   distance to the center of radiation of the antenna




 Table for Filed Antenna:

  For WLAN 2.4G:
    Ant.              Brand          Model Name          Antenna Type          Connector       Gain (dBi)
     1         TP—LINK:                   N/A                  PCB                 N/A            1.47
     2         TP—LINK                    N/A                  PCB                 N/A            1.47
  Note:
  This EUT supports CDD, and all antennas have the same gain, so Directional
  gain=Gant+10log(Nant/Nss) dB =1.47+10log(2/1)=4.48.

  For RLAN 5G:
    Ant.               Brand            Model Name         Antenna Type         Connector      Gain (dBi)
      1                           N/A                PCB                N/A                       0.89
      2                           N/A                PCB                N/A                       0.96
  Note:
  This EUT supports MIMO 2X2, any transmit signals are correlated with each other,
  so Directional gain =10log[(10°~"°"+10©°>"%+...10°~°)*/NJdBi. Then,
  Directional gain=10log[(10°*""°+10°"%"/2]gBi =3.94.




Report No.: BTL—FCCP—3—1812C106                                                                   Page 3 of 4
                                                                                            Report Version: ROO


  3. TEST RESULTS

  WLAN 2.4G:
   Directional Directional    Max Average Max Average     Power     Limit of Power
                                                                                               Test
       gain        gain       Output Power Output Power Density (S)   Density (S)
                                                                                              Result
      (dBi)     (numeric)        (dBm)        (mW)      (mW/cm2)      (mW/cm2)
       4.48        2.8054         22.94        196.7886         0.10989           1          Complies


 5G Band UNII-1:
                                  Max          Max
    Directional Directional                               Power     Limit of Power
                               Conducted    Conducted                                          Test
        gain        gain                                Density (S)   Density (S)
                              Output Power Output Power                                       Result
       (dBi)     (numeric)                              (mW/cm2)      (mW/cm2)
                                 (dBm)        (mW)
       3.94        2.4774         22.90        194.9845         0.09615           1          Complies


 5G Band UNII-3:
                                  Max          Max
    Directional Directional                               Power     Limit of Power
                               Conducted    Conducted                                          Test
        gain        gain                                Density (S)   Density (S)
                              Output Power Output Power                                       Result
       (dBi)     (numeric)                              (mW/cm2)      (mW/cm2)
                                 (dBm)        (mW)
       3.94        2.4774         22.83        191.8669         0.09461           1          Complies


 For the max simultaneous transmission MPE:


    Power Density (S) Power Density (S)                          Limit of Power
       (mW/cm2)          (mW/cm2)                Total             Density (S)         Test Result
         2.4G               5G                                     (mW/cm2)
         0.10989              0.09615           0.20604                1                Complies

 Note: the calculated distance is 20 cm.




                                           End of Test Report

Report No.: BTL-FCCP-3-1812C106                                                             Page 4 of 4
                                                                                      Report Version: R00



Document Created: 2019-03-24 22:33:49
Document Modified: 2019-03-24 22:33:49

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC