13. MPE Rev2

FCC ID: TE7CPE605

RF Exposure Info

Download: PDF
FCCID_4326588

FCC RF EXPOSURE REPORT FCC ID: TE7CPE605 Project No. : 1812C197 Equipment : 5GHz 150Mbps 23dBi Outdoor CPE Model : CPE605 Applicant : TP-Link Technologies Co., Ltd. Address : Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park, Nanshan Shenzhen, 518057 China According : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FCCP-2-1812C197 Page 1 of 4 Report Version: R01

1. GENERAL SUMMARY Equipment : 5GHz 150Mbps 23dBi Outdoor CPE Brand Name : tp-link Test Model : CPE605 Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Manufacturer : TP-Link Technologies Co., Ltd. Address : Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park, Nanshan Shenzhen, 518057 China Factory : TP-Link Technologies Co., Ltd. Address : Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park, Nanshan Shenzhen, 518057 China Date of Test : Dec. 27, 2018 ~ Mar. 09, 2019 Test Sample : Engineering Sample No.: D181110844 Standards : FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-2-1812C197) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of A2LA according to the ISO/IEC 17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-2-1812C197 Page 2 of 4 Report Version: R01

3UL py 2. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: ,. 16_IBP " in 4n where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Antenna Specification: Ant. Brand Mode!l Name Antenna Type Connector Gain (dBi) 1 N/A PCB N/A 18.32 Note: The antenna were fixed point to point,so the power and PSD limit not need to be reduced. Report No.: BTL—FCCP—2—18120C197 Page 3 of 4 Report Version: RO1

3. TEST RESULTS For 5GHz UNII-1: Antenna Antenna Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 18.32 67.9204 12.86 19.3197 0.26119 1 Complies For 5GHz UNII-3: Antenna Antenna Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 18.32 67.9204 17.39 54.8277 0.74123 1 Complies Note: The calculated distance is 20 cm. End of Test Report Report No.: BTL-FCCP-2-1812C197 Page 4 of 4 Report Version: R01


Document Created: 2019-07-01 15:43:49
Document Modified: 2019-07-01 15:43:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC