13. MPE

FCC ID: TE7CPE510V32

RF Exposure Info

Download: PDF
FCCID_4501576

Report No.: BTL-FCCP-2-1908C025 FCC RF EXPOSURE REPORT FCC ID: TE7CPE510V32 Project No. : 1908C025 Equipment : 5GHz 300Mbps 13dBi Outdoor CPE Brand Name : tp-link Test Model : CPE510 Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Manufacturer : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Receipt : Aug. 05, 2019 Date of Test : Aug. 07, 2019 ~ Sep. 22, 2019 Issued Date : Oct. 10, 2019 Report Version : R00 Test Sample : Engineering Sample No.: DG19080731 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Vincent Tan Approved by : Ethan Ma Add: No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Tel: +86-769-8318-3000 Web: www.newbtl.com Page 1 of 4

Report No.: BTL-FCCP-2-1908C025 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Oct. 10, 2019 Page 2 of 4

Report No.: BTL-FCCP-2-1908C025 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A PCB N/A 11.6 2 N/A PCB N/A 11.6 Note: This EUT supports CDD, and all antennas have the same gain, so Directional gain=GANT+Array Gain. For Output Power measurements, Array Gain = 0 dB (NANT ≤ 4), so the Directional gain=11.6. The antenna were fixed point to point, so the Output Power and Power Spectral Density limit not need to be reduced. Page 3 of 4

Report No.: BTL-FCCP-2-1908C025 2. TEST RESULTS For 5GHz UNII-1: Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 11.6 14.4544 25.36 343.5579 0.98844 1 Complies For 5GHz UNII-3: Directional Directional Max. Output Max. Output Power Limit of Power Test Gain Gain Power Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 11.6 14.4544 22.21 166.3413 0.47858 1 Complies Note: The calculated distance is 20 cm. Output power including tune up tolerance(tune up tolerance: 0.5 dBm). End of Test Report Page 4 of 4


Document Created: 2019-11-05 11:42:28
Document Modified: 2019-11-05 11:42:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC