12. Test Report_part3 rev1

FCC ID: TE7CPE210V32

RF Exposure Info

Download: PDF
FCCID_4501084

Report No.: BTL-FCCP-2-1908C055 FCC RF EXPOSURE REPORT FCC ID: TE7CPE210V32 Project No. : 1908C055 Equipment : 2.4GHz 300Mbps 9dBi Outdoor CPE Brand Name : tp-link Test Model : CPE210 Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Manufacturer : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Receipt : Aug. 07, 2019 Date of Test : Aug. 08, 2019 ~ Aug. 21, 2019 Issued Date : Oct. 29, 2019 Report Version : R01 Test Sample : Engineering Sample No.: DG190807117 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Welly Zhou Approved by : Ethan Ma Add: No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Tel: +86-769-8318-3000 Web: www.newbtl.com Page 1 of 3

Report No.: BTL-FCCP-2-1908C055 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue Sep. 25, 2019 R01 Modified the comments of TCB. Oct. 29, 2019 Page 2 of 3

Report No.: BTL-FCCP-2-1908C055 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A PCB Weld 8.07 2 N/A PCB Weld 9.64 Note: This EUT supports CDD, and antenna gains are not equal, so Directional gain= 10log[(10G1/20+10G2/20+...10GN/20)2/N]dBi=11.90. For fixed point-to-point operation, the directional gain greater than 6 dBi provided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6 dBi. So the average output power limit is 30-[(Directional gain-6)*1/3]=30-1.97=28.03, the power spectral density limit is 8-(Directional gain-6)=8-5.9=2.10. 2. TEST RESULTS Directional Directional Max. Average Max. Average Power Limit of Power Test gain Gain Output Power Output Power Density (S) Density (S) Result (dBi) (numeric) (dBm) (mW) (mW/cm2) (mW/cm2) 11.90 15.4882 25.60 363.0781 0.71636 1 Complies Note: The calculated distance is 25 cm. Output power including tune up tolerance. End of Test Report Page 3 of 3


Document Created: 2019-10-29 15:27:36
Document Modified: 2019-10-29 15:27:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC