RF Test Report 2.4GHz

FCC ID: TE7C5400V2

Test Report

Download: PDF
FCCID_3653712

seonton ias. FCC Test Report Report No. : FRSNO101—05AA Project No: CB10610365 FCC Test Report Equipment : AC5400 Wireless Tri—Band MU—MIMO Gigabit Router Brand Name : TP—Link Model No. : Archer C5400 FCC ID : TEZC5400V2 Standard : 47 CFRFCC Part 15.247 Operating Band : 2400 MHz — 2483.5 MHz Function $ Point—to—multipoint; [_] Point—to—point Applicant : TP—Link Technologies Co., Ltd. Building 24 (floors 1,3,4,5) and 28 (floors1—4) Central Science and Technology Park,Nanshan Shenzhen, 518057 China Manufacturer : TP—Link Technologies Co., Ltd. Building 24 (floors 1,3,4,5) and 28 (floors1—4) Central Science and Technology Park,Nanshan Shenzhen, 518057 China The product sample received on Oct. 28, 2015 and completely tested on Jun. 13, 2017. We, SPORTON, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10—2013 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. 1 94y © \N\_/z § e 7 «V 5 N S Testing Laboratory 7 /""rlfh\.\\-‘“\ 1190 Cliff Chang SPORTON INTERNATIONAL INC. SPORTON INTERNATIONAL INC. Page No. : 1 of 14 TEL : 886—3—3273456 Report Version : Rev. 01 FAX : 886—3—3270073 Issued Date : Nov. 03, 2017 FCC ID: TEZCE400V2

FCC Test Report Report No. : FR5N0101-05AA Table of Contents 1 GENERAL DESCRIPTION ....................................................................................................................5 1.1 Information..............................................................................................................................................5 1.2 Testing Applied Standards .....................................................................................................................8 1.3 Testing Location Information ..................................................................................................................8 1.4 Measurement Uncertainty ......................................................................................................................8 1.5 The Worst Case Measurement Configuration........................................................................................9 1.6 EUT Operation during Test ....................................................................................................................9 1.7 Accessories ............................................................................................................................................9 1.8 Support Equipment.................................................................................................................................9 1.9 Test Setup Diagram .............................................................................................................................10 2 TRANSMITTER TEST RESULT ..........................................................................................................11 2.1 Emissions in Restricted Frequency Bands...........................................................................................11 3 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................14 APPENDIX A. TEST RESULTS OF EMISSIONS IN RESTRICTED FREQUENCY BANDS APPENDIX B. TEST PHOTOS PHOTOGRAPHS OF EUT V01 SPORTON INTERNATIONAL INC. Page No. : 2 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA Summary of Test Result Conformance Test Specifications Report Ref. Std. Description Limit Result Clause Clause 1.1.2 15.203 Antenna Requirement FCC 15.203 Complied 2.1 15.247(d) Emissions in Restricted Frequency Bands Restricted Bands: Complied FCC 15.209 SPORTON INTERNATIONAL INC. Page No. : 3 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA Revision History Report No. Version Description Issued Date FR5N0101-05AA Rev. 01 Initial issue of report Nov. 03, 2017 SPORTON INTERNATIONAL INC. Page No. : 4 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA 1 General Description 1.1 Information 1.1.1 RF General Information Frequency Range (MHz) IEEE Std. 802.11 Ch. Frequency (MHz) Channel Number 2400-2483.5 b, g, n (HT20), ac (VHT20) 2412-2462 1-11 [11] 2400-2483.5 n (HT40), ac (VHT40) 2422-2452 3-9 [7] Band Mode BWch (MHz) Nant 2.4G 11b 20 4 2.4G 11g 20 4 2.4G n (HT20) 20 4 2.4G n (HT40) 40 4 2.4G ac (VHT20) 20 4 2.4G ac (VHT40) 40 4 Note:  2.4G is the 2.4GHz Band (2.4-2.4835GHz).  11b mode uses a combination of DSSS-DBPSK, DQPSK, CCK modulation.  11g, HT20 and HT40 use a combination of OFDM-BPSK, QPSK, 16QAM, 64QAM modulation.  VHT20, VHT40 use a combination of OFDM-BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM modulation.  BWch is the nominal channel bandwidth.  Nss-Min is the minimum number of spatial streams.  Nant is the number of outputs. e.g., 2(2,3) means have 2 outputs for port 2 and port 3. 2 means have 2 outputs for port 1 and port 2. SPORTON INTERNATIONAL INC. Page No. : 5 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA 1.1.2 Antenna Information Gain (dBi) Ant. Brand Model Name Antenna Type Connector 2.4GHz 5GHz 1 TP-LINK 3101500737 PCB Antenna I-PEX 1.8 1.8 2 TP-LINK 3101500737 PCB Antenna I-PEX 1.8 1.8 3 TP-LINK 3101500737 PCB Antenna I-PEX 1.8 1.8 4 TP-LINK 3101500737 PCB Antenna I-PEX 1.8 1.8 5 TP-LINK 3101500734 PCB Antenna I-PEX - 1.8 6 TP-LINK 3101500734 PCB Antenna I-PEX - 1.8 7 TP-LINK 3101500734 PCB Antenna I-PEX - 1.8 8 TP-LINK 3101500734 PCB Antenna I-PEX - 1.8 Note: 1.The EUT has eight antennas. 2.The EUT has three radios. (Radio 1 supports 5GHz band 1 and band 2 WLAN function, Radio 2 supports 5GHz band 3 and band 4 WLAN function and Radio 3 supports 2.4GHz WLAN function.) 3.The EUT supports WLAN (4TX, 4RX): Chain 1, Chain 2, Chain 3 and Chain 4 could transmit/receive simultaneously. SPORTON INTERNATIONAL INC. Page No. : 6 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA 1.1.3 EUT Operational Condition EUT Power Type From power adapter With beamforming Beamforming Function Without beamforming for 802.11n/ac in 2.4GHz/5GHz. 1.1.4 Table for Class II Change This product is an extension of original one reported under Sporton project number: FR5N0101-01AA Below is the table for the change of the product with respect to the original one. Modifications Performance Checking 1. Updating chip version to "BCM4366 C0" from "BCM4366 B1". Emissions in Restricted The difference between original version and new version as below: Version Description Frequency Bands Below 1GHz. BCM4366 B1 Note: After verified does not Single User Multiple Input Multiple Output (Original) BCM4366 C0 affect the other test results. Multi-User Multiple-Input Multiple-Output (New) 2. Changing applicant’s company to “TP-Link Technologies Co., Ltd.” from “TP-LINK TECHNOLOGIES CO., LTD.”. It does not need to re-test. 3. Changing brand name to “TP-Link” from “TP-LINK”. 4. Changing FCC ID to “TE7C5400V2” from “TE7C5400”. SPORTON INTERNATIONAL INC. Page No. : 7 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA 1.2 Testing Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  47 CFR FCC Part 15  ANSI C63.10-2013  FCC KDB 558074 D01 v04  FCC KDB 662911 D01 v02r01  FCC KDB 644545 D01 v01r02 1.3 Testing Location Information Testing Location HWA YA ADD : No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. TEL : 886-3-327-3456 FAX : 886-3-318-0055 JHUBEI ADD : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. TEL : 886-3-656-9065 FAX : 886-3-656-9085 Test Condition Test Site No. Test Engineer Test Environment Test Date Radiated 03CH01-CB Joy Tseng 22°C / 54% Jun. 13, 2017 Test site Designation No. TW0006 with FCC. Test site registered number IC 4086D with Industry Canada. 1.4 Measurement Uncertainty ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Test Items Uncertainty Remark Radiated Emission (30MHz ~ 1,000MHz) 3.6 dB Confidence levels of 95% SPORTON INTERNATIONAL INC. Page No. : 8 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA 1.5 The Worst Case Measurement Configuration The Worst Case Mode for Following Conformance Tests Tests Item Emissions in Restricted Frequency Bands Test Condition Radiated measurement If EUT consist of multiple antenna assembly (multiple antenna are used in EUT regardless of spatial multiplexing MIMO configuration), the radiated test should be performed with highest antenna gain of each antenna type. Operating Mode < 1GHz Normal Link The EUT for Emissions in Restricted Frequency Bands test was performed at Z axis and Y axis position and the worst case was found from Z axis. So the measurement will follow this same test configuration. 1 EUT in Z axis The Worst Case Mode for Following Conformance Tests Tests Item Simultaneous Transmission Analysis - Co-location RF Exposure Evaluation Operating Mode 1 2.4GHz WLAN + 5GHz WLAN Band1/Band2 + 5GHz WLAN Band 3/Band4 Refer to Sporton Test Report No.: FA5N0101-05 for Co-location RF Exposure Evaluation. 1.6 EUT Operation during Test During the test, the EUT operation to normal function. 1.7 Accessories Accessories Equipment Brand Model Rating Remark Name Name Name Input: 100-240Vac, 50/60Hz, 1.5A Cable Adapter Huntkey HKA06012050-7G Output: 12.0Vdc, 5.0A (Non-shieided, 1.4m) Other Power cable*1: Non-shieided, 1.8m 1.8 Support Equipment Support Equipment No. Equipment Brand Name Model Name FCC ID 1 Notebook*2 DELL E4300 DoC 2 Notebook*3 Apple Mac Book DoC 3 Flash disk Silicon Power Touch 835 DoC 4 Flash disk3.0 Silicon Power B06 DoC SPORTON INTERNATIONAL INC. Page No. : 9 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA 1.9 Test Setup Diagram Test Setup Diagram - Radiated Test < 1GHz Item Connection Shielded Length 1 RJ-45 cable No 10m 2 RJ-45 cable No 10m 3 Power cable No 3.2m 4 RJ-45 cable*3 No 1.5m SPORTON INTERNATIONAL INC. Page No. : 10 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA 2 Transmitter Test Result 2.1 Emissions in Restricted Frequency Bands 2.1.1 Emissions in Restricted Frequency Bands Limit Restricted Band Emissions Limit Frequency Range (MHz) Field Strength (uV/m) Field Strength (dBuV/m) Measure Distance (m) 0.009~0.490 2400/F(kHz) 48.5 - 13.8 300 0.490~1.705 24000/F(kHz) 33.8 - 23 30 1.705~30.0 30 29 30 30~88 100 40 3 88~216 150 43.5 3 216~960 200 46 3 Above 960 500 54 3 Note 1: Test distance for frequencies at or above 30 MHz, measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements). Note 2: Test distance for frequencies at below 30 MHz, measurements may be performed at a distance closer than the EUT limit distance; however, an attempt should be made to avoid making measurements in the near field. When performing measurements below 30 MHz at a closer distance than the limit distance, the results shall be extrapolated to the specified distance by either making measurements at a minimum of two or more distances on at least one radial to determine the proper extrapolation factor or by using the square of an inverse linear distance extrapolation factor (40 dB/decade). The test report shall specify the extrapolation method used to determine compliance of the EUT. Note 3: Using the distance of 1m during the test for above 18 GHz, and the test value to correct for the distance factor at 3m. 2.1.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. SPORTON INTERNATIONAL INC. Page No. : 11 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA 2.1.3 Test Procedures Test Method  The average emission levels shall be measured in [duty cycle ≥ 98 or duty factor].  Refer as ANSI C63.10, clause 6.9.2.2 band-edge testing shall be performed at the lowest frequency channel and highest frequency channel within the allowed operating band.  For the transmitter unwanted emissions shall be measured using following options below:  Refer as FCC KDB 558074, clause 12 for unwanted emissions into restricted bands. Refer as FCC KDB 558074, clause 12.2.5.1 Option 1 (trace averaging for duty cycle ≥98%) Refer as FCC KDB 558074, clause 12.2.5.2 Option 2 (trace averaging + duty factor). Refer as FCC KDB 558074, clause 12.2.5.3 Option 3 (Reduced VBW≥1/T). Refer as ANSI C63.10, clause 4.2.3.2.3 (Reduced VBW). VBW ≥ 1/T, where T is pulse time. Refer as ANSI C63.10, clause 4.2.3.2.4 average value of pulsed emissions. Refer as FCC KDB 558074, clause 12.2.4 measurement procedure peak limit.  For the transmitter band-edge emissions shall be measured using following options below:  Refer as FCC KDB 558074 clause 13.1, When the performing peak or average radiated measurements, emissions within 2 MHz of the authorized band edge may be measured using the marker-delta method described below.  Refer as FCC KDB 558074, clause 13.2 (ANSI C63.10, clause 6.9.3) for marker-delta method for band-edge measurements.  Refer as FCC KDB 558074, clause 13.3 for narrower resolution bandwidth (100kHz) using the band power and summing the spectral levels (i.e., 1 MHz).  For conducted and cabinet radiation measurement, refer as FCC KDB 558074, clause 12.2.2.  For conducted unwanted emissions into restricted bands (absolute emission limits). Devices with multiple transmit chains using options given below: (1) Measure and sum the spectra across the outputs or (2) Measure and add 10 log(N) dB  For FCC KDB 662911 The methodology described here may overestimate array gain, thereby resulting in apparent failures to satisfy the out-of-band limits even if the device is actually compliant. In such cases, compliance may be demonstrated by performing radiated tests around the frequencies at which the apparent failures occurred. SPORTON INTERNATIONAL INC. Page No. : 12 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA 2.1.4 Test Setup Transmitter Radiated Emissions 9kHz ~30MHz 30MHz~1GHz 2.1.5 Transmitter Radiated Unwanted Emissions (Below 30MHz) All amplitude of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. 2.1.6 Test Result of Transmitter Radiated Unwanted Emissions Refer as Appendix A SPORTON INTERNATIONAL INC. Page No. : 13 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

FCC Test Report Report No. : FR5N0101-05AA 3 Test Equipment and Calibration Data Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Remark Date Due Date BILOG ANTENNA CBL6112D & 37880 & Radiation TESEQ & EMCI 20MHz ~ 2GHz Aug. 30, 2016 Aug. 29, 2017 with 6dB Attenuator N-6-06 AT-N0609 (03CH01-CB) Radiation Pre-Amplifier EMCI EMC330N 980332 20MHz ~ 3GHz May 02, 2017 May 01, 2018 (03CH01-CB) Radiation Spectrum Analyzer R&S FSP40 100056 9kHz ~ 40GHz Nov. 22, 2016 Nov. 21, 2017 (03CH01-CB) Radiation EMI Test R&S ESCS 100355 9kHz ~ 2.75GHz May 06, 2017 May 05, 2018 (03CH01-CB) Low Radiation RF Cable-low Woken N/A 30 MHz ~ 1 GHz Oct. 24, 2016 Oct. 23, 2017 Cable-16+17 (03CH01-CB) Radiation Loop Antenna Teseq HLA 6120 24155 9kHz - 30 MHz Mar. 16, 2016* Mar. 15, 2018* (03CH01-CB) Note: Calibration Interval of instruments listed above is one year. “*” Calibration Interval of instruments listed above is two years. SPORTON INTERNATIONAL INC. Page No. : 14 of 14 TEL : 886-3-3273456 Report Version : Rev. 01 FAX : 886-3-3270973 Issued Date : Nov. 03, 2017 FCC ID: TE7C5400V2

RSE below 1GHz Result Appendix A RSE below 1GHz Result Operating Mode 1 Polarization Horizontal Operating Function Normal Link Note 1: “>20dB” means emission levels that exceed the level of 20 dB below the applicable limit. Note 2: “N/F” means Nothing Found emissions (No emissions were detected.) SPORTON INTERNATIONAL INC. Page No. : 1 of 2 TEL : 886-3-327-3456 FAX : 886-3-327-0973

RSE below 1GHz Result Appendix A RSE below 1GHz Result Operating Mode 1 Polarization Vertical Operating Function Normal Link Note 1: “>20dB” means emission levels that exceed the level of 20 dB below the applicable limit. Note 2: “N/F” means Nothing Found emissions (No emissions were detected.) SPORTON INTERNATIONAL INC. Page No. : 2 of 2 TEL : 886-3-327-3456 FAX : 886-3-327-0973


Document Created: 2017-11-22 18:34:34
Document Modified: 2017-11-22 18:34:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC